[PATCH] sc16is7xx: fix incorrect register bits macro

Wills Wang
2015-12-19T11:25:28Z

In datasheet, Modem Status Register MSR[4-5] reflect the modem pins
CTS/DSR/RI/CD signal state.

Signed-off-by: Wills Wang <wills.wang@live.com>
---
drivers/tty/serial/sc16is7xx.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index edb5305..9d18c24 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -196,14 +196,14 @@
* or (IO6)
* - only on 75x/76x
*/
-#define SC16IS7XX_MSR_CTS_BIT (1 << 0) /* CTS */
-#define SC16IS7XX_MSR_DSR_BIT (1 << 1) /* DSR (IO4)
+#define SC16IS7XX_MSR_CTS_BIT (1 << 4) /* CTS */
+#define SC16IS7XX_MSR_DSR_BIT (1 << 5) /* DSR (IO4)
* - only on 75x/76x
*/
-#define SC16IS7XX_MSR_RI_BIT (1 << 2) /* RI (IO7)
+#define SC16IS7XX_MSR_RI_BIT (1 << 6) /* RI (IO7)
* - only on 75x/76x
*/
-#define SC16IS7XX_MSR_CD_BIT (1 << 3) /* CD (IO6)
+#define SC16IS7XX_MSR_CD_BIT (1 << 7) /* CD (IO6)
* - only on 75x/76x
*/
#define SC16IS7XX_MSR_DELTA_MASK 0x0F /* Any of the delta bits! */
@@ -240,7 +240,7 @@

/* IOControl register bits (Only 750/760) */
#define SC16IS7XX_IOCONTROL_LATCH_BIT (1 << 0) /* Enable input latching */
-#define SC16IS7XX_IOCONTROL_GPIO_BIT (1 << 1) /* Enable GPIO[7:4] */
+#define SC16IS7XX_IOCONTROL_MODEM_BIT (1 << 1) /* Enable GPIO[7:4] as modem pins */
#define SC16IS7XX_IOCONTROL_SRESET_BIT (1 << 3) /* Software Reset */

/* EFCR register bits */
@@ -674,7 +674,7 @@ static void sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
case SC16IS7XX_IIR_CTSRTS_SRC:
msr = sc16is7xx_port_read(port, SC16IS7XX_MSR_REG);
uart_handle_cts_change(port,
- !!(msr & SC16IS7XX_MSR_CTS_BIT));
+ !!(msr & SC16IS7XX_MSR_DCTS_BIT));
break;
case SC16IS7XX_IIR_THRI_SRC:
sc16is7xx_handle_tx(port);
--
1.9.1