From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: tpmdd-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org,
"Martin Wilck" <Martin.Wilck@ts.fujitsu.com>,
"Peter Huewe" <peterhuewe@gmx.de>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Subject: Re: [PATCH v3 4/7] tpm_tis: Use devm_ioremap_resource
Date: Sun, 3 Jan 2016 19:23:12 +0200 [thread overview]
Message-ID: <20160103172312.GC4155@intel.com> (raw)
In-Reply-To: <1450376600-6970-5-git-send-email-jgunthorpe@obsidianresearch.com>
On Thu, Dec 17, 2015 at 11:23:17AM -0700, Jason Gunthorpe wrote:
> This does a request_resource under the covers which means tis holds a
> lock on the memory range it is using so other drivers cannot grab it.
> When doing probing it is important to ensure that other drivers are
> not using the same range before tis starts touching it.
>
> To do this flow the actual struct resource from the device right
> through to devm_ioremap_resource. This ensures all the proper resource
> meta-data is carried down.
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
> Tested-by: Wilck, Martin <martin.wilck@ts.fujitsu.com>
> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> ---
> drivers/char/tpm/tpm_tis.c | 29 ++++++++++++++++-------------
> 1 file changed, 16 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
> index b2b31f5418ca..856fb35e574c 100644
> --- a/drivers/char/tpm/tpm_tis.c
> +++ b/drivers/char/tpm/tpm_tis.c
> @@ -67,8 +67,7 @@ enum tis_defaults {
> };
>
> struct tpm_info {
> - unsigned long start;
> - unsigned long len;
> + struct resource res;
> /* irq > 0 means: use irq $irq;
> * irq = 0 means: autoprobe for an irq;
> * irq = -1 means: no irq support
> @@ -77,8 +76,11 @@ struct tpm_info {
> };
>
> static struct tpm_info tis_default_info = {
> - .start = TIS_MEM_BASE,
> - .len = TIS_MEM_LEN,
> + .res = {
> + .start = TIS_MEM_BASE,
> + .end = TIS_MEM_BASE + TIS_MEM_LEN - 1,
> + .flags = IORESOURCE_MEM,
> + },
> .irq = 0,
> };
>
> @@ -692,7 +694,7 @@ static int tpm_tis_init(struct device *dev, struct tpm_info *tpm_info,
> chip->acpi_dev_handle = acpi_dev_handle;
> #endif
>
> - chip->vendor.iobase = devm_ioremap(dev, tpm_info->start, tpm_info->len);
> + chip->vendor.iobase = devm_ioremap_resource(dev, &tpm_info->res);
> if (!chip->vendor.iobase)
> return -EIO;
>
> @@ -875,9 +877,12 @@ static int tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
> {
> struct tpm_info tpm_info = {};
> acpi_handle acpi_dev_handle = NULL;
> + struct resource *res;
>
> - tpm_info.start = pnp_mem_start(pnp_dev, 0);
> - tpm_info.len = pnp_mem_len(pnp_dev, 0);
> + res = pnp_get_resource(pnp_dev, IORESOURCE_MEM, 0);
> + if (!res)
> + return -ENODEV;
> + tpm_info.res = *res;
>
> if (pnp_irq_valid(pnp_dev, 0))
> tpm_info.irq = pnp_irq(pnp_dev, 0);
> @@ -940,12 +945,10 @@ static int tpm_check_resource(struct acpi_resource *ares, void *data)
> struct tpm_info *tpm_info = (struct tpm_info *) data;
> struct resource res;
>
> - if (acpi_dev_resource_interrupt(ares, 0, &res)) {
> + if (acpi_dev_resource_interrupt(ares, 0, &res))
> tpm_info->irq = res.start;
> - } else if (acpi_dev_resource_memory(ares, &res)) {
> - tpm_info->start = res.start;
> - tpm_info->len = resource_size(&res);
> - }
> + else if (acpi_dev_resource_memory(ares, &res))
> + tpm_info->res = res;
>
> return 1;
> }
> @@ -978,7 +981,7 @@ static int tpm_tis_acpi_init(struct acpi_device *acpi_dev)
>
> acpi_dev_free_resource_list(&resources);
>
> - if (tpm_info.start == 0 && tpm_info.len == 0) {
> + if (resource_type(&tpm_info.res) != IORESOURCE_MEM) {
> dev_err(&acpi_dev->dev,
> FW_BUG "TPM2 ACPI table does not define a memory resource\n");
> return -EINVAL;
> --
> 2.1.4
>
next prev parent reply other threads:[~2016-01-03 17:23 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-17 18:23 [PATCH v3 0/7] tpm_tis: Clean up force module parameter Jason Gunthorpe
2015-12-17 18:23 ` [PATCH v3 1/7] tpm_crb: Use the common ACPI definition of struct acpi_tpm2 Jason Gunthorpe
2016-01-03 17:09 ` Jarkko Sakkinen
2016-01-04 18:23 ` Jason Gunthorpe
2016-01-04 18:49 ` Jarkko Sakkinen
2015-12-17 18:23 ` [PATCH v3 2/7] tpm_tis: Disable interrupt auto probing on a per-device basis Jason Gunthorpe
2016-01-03 17:20 ` Jarkko Sakkinen
2016-01-04 18:24 ` Jason Gunthorpe
2016-01-04 18:32 ` Jarkko Sakkinen
2015-12-17 18:23 ` [PATCH v3 3/7] tpm_tis: Do not fall back to a hardcoded address for TPM2 Jason Gunthorpe
2015-12-18 9:34 ` Jarkko Sakkinen
2015-12-18 16:51 ` Jason Gunthorpe
2015-12-20 12:34 ` Jarkko Sakkinen
2015-12-17 18:23 ` [PATCH v3 4/7] tpm_tis: Use devm_ioremap_resource Jason Gunthorpe
2016-01-03 17:23 ` Jarkko Sakkinen [this message]
2015-12-17 18:23 ` [PATCH v3 5/7] tpm_tis: Clean up the force=1 module parameter Jason Gunthorpe
2016-01-03 17:26 ` Jarkko Sakkinen
2016-01-04 18:27 ` Jason Gunthorpe
2015-12-17 18:23 ` [PATCH v3 6/7] tpm_crb: Drop le32_to_cpu(ioread32(..)) Jason Gunthorpe
2016-01-03 17:28 ` Jarkko Sakkinen
2015-12-17 18:23 ` [PATCH v3 7/7] tpm_crb: Use devm_ioremap_resource Jason Gunthorpe
2016-01-03 17:32 ` Jarkko Sakkinen
2016-01-04 18:30 ` Jason Gunthorpe
2016-01-04 19:43 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160103172312.GC4155@intel.com \
--to=jarkko.sakkinen@linux.intel.com \
--cc=Martin.Wilck@ts.fujitsu.com \
--cc=jgunthorpe@obsidianresearch.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peterhuewe@gmx.de \
--cc=tpmdd-devel@lists.sourceforge.net \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).