Re: x86/microcode update on systems without INITRD

[Mike Keehan <mike.keehan@blueyonder.co.uk>]

On Thu, 7 Jan 2016 13:41:11 +0100
Markus Trippelsdorf <markus@trippelsdorf.de> wrote:

> On 2016.01.07 at 13:36 +0100, Thomas Voegtle wrote:
> > On Thu, 7 Jan 2016, Borislav Petkov wrote:
> > 
> > >On Thu, Jan 07, 2016 at 01:12:16PM +0100, Thomas Voegtle wrote:
> > >>I just diffed my 4.3 config with the 4.4 config and saw that the
> > >>whole Microcode stuff was silently dropped by a normal "make
> > >>oldconfig".
> > >
> > >Can you send me that 4.3 config please?
> > 
> > Attached. It is a little bit unusual config without modules etc.
> > 
> > But doesn't dropping Microcde stuff in the config happen to anyone
> > who hasn't INITRD stuff switched on?
> 
> Yes. But, as I wrote above, if you simply drop the BLK_DEV_INITRD
> dependency, it will work just fine. 
> I also don't use modules and the firmware gets applied at boot time.
> 
> ...
> [    2.573261] EDAC amd64: MCT channel count: 2
> [    2.573401] EDAC MC0: Giving out device to module amd64_edac
> controller F10h: DEV 0000:00:18.2 (INTERRUPT) [    2.573414] EDAC
> PCI0: Giving out device to module amd64_edac controller EDAC PCI
> controller: DEV 0000:00:18.2 (POLLED) [    2.573424] hidraw: raw HID
> events driver (C) Jiri Kosina [    2.573449] usbcore: registered new
> interface driver usbhid [    2.573449] usbhid: USB HID core driver
> [    2.573770] usbcore: registered new interface driver snd-usb-audio
> [    2.573786] Netfilter messages via NETLINK v0.30. [    2.573797]
> nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [    2.573966]
> ctnetlink v0.93: registering with nfnetlink. [    2.574427]
> ip_tables: (C) 2000-2006 Netfilter Core Team [    2.574477] NET:
> Registered protocol family 17 [    2.574487] 9pnet: Installing 9P2000
> support [    2.574717] microcode: CPU0: patch_level=0x010000db
> [    2.574724] microcode: CPU1: patch_level=0x010000db
> [    2.574731] microcode: CPU2: patch_level=0x010000db
> [    2.574736] microcode: CPU3: patch_level=0x010000db
> [    2.574761] microcode: Microcode Update Driver: v2.01
> <tigran@aivazian.fsnet.co.uk>, Peter Oruba [    2.574876] registered
> taskstats version 1 [    2.575132] Btrfs loaded
> ...
> 

I'm not sure what you mean by "drop the BLK_DEV_INITRD dependency",
but my microcode does not get loaded unless I have BLK_DEV_INITRD=Y
in my .config.

I don't use initrd, but I do use modules.

Mike.