linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andreas Werner <andreas.werner@men.de>
To: Lee Jones <lee.jones@linaro.org>
Cc: Andreas Werner <andreas.werner@men.de>,
	<linux-kernel@vger.kernel.org>, <sameo@linux.intel.com>
Subject: Re: [PATCH 3/4] mfd/menf21bmc.c: add additional sysfs entries for BMC status information
Date: Mon, 11 Jan 2016 11:38:01 +0100	[thread overview]
Message-ID: <20160111103801.GC1087@awelinux> (raw)
In-Reply-To: <20160111103039.GA14104@x1>

On Mon, Jan 11, 2016 at 10:30:39AM +0000, Lee Jones wrote:
> On Wed, 16 Dec 2015, Andreas Werner wrote:
> 
> > This patch adds additional sysfs entries to provide status
> > information to the userland.
> > 
> > The following informations are now provided:
> >         - Get operation hours counter
> >         - Get board slot address
> >         - Get powercycle counter
> >         - Set/get Hw Variant
> > 
> > Signed-off-by: Andreas Werner <andreas.werner@men.de>
> > ---
> >  drivers/mfd/menf21bmc.c | 99 +++++++++++++++++++++++++++++++++++++++++++++++--
> >  1 file changed, 96 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/mfd/menf21bmc.c b/drivers/mfd/menf21bmc.c
> > index 742ffe7..dd068c0 100644
> > --- a/drivers/mfd/menf21bmc.c
> > +++ b/drivers/mfd/menf21bmc.c
> > @@ -20,6 +20,10 @@
> >  #define BMC_CMD_REV_MAJOR	0x80
> >  #define BMC_CMD_REV_MINOR	0x81
> >  #define BMC_CMD_REV_MAIN	0x82
> > +#define BMC_CMD_SLOT_ADDRESS	0x8c
> > +#define BMC_CMD_HW_VARIANT	0x8f
> > +#define BMC_CMD_PWRCYCL_CNT	0x93
> > +#define BMC_CMD_OP_HRS_CNT	0x94
> >  
> >  static struct mfd_cell menf21bmc_cell[] = {
> >  	{ .name = "menf21bmc_wdt", },
> > @@ -28,7 +32,7 @@ static struct mfd_cell menf21bmc_cell[] = {
> >  };
> >  
> >  static ssize_t menf21bmc_mode_show(struct device *dev,
> > -				  struct device_attribute *attr, char *buf)
> > +				   struct device_attribute *attr, char *buf)
> 
> This is an irrelevant change.  Please split it out.

Argh, my mistake. I will fix it and resend this patch.

> 
> >  {
> >  	struct i2c_client *client = to_i2c_client(dev);
> >  	int val;
> > @@ -41,8 +45,8 @@ static ssize_t menf21bmc_mode_show(struct device *dev,
> >  }
> >  
> >  static ssize_t menf21bmc_mode_store(struct device *dev,
> > -				   struct device_attribute *attr,
> > -				   const char *buf, size_t size)
> > +				    struct device_attribute *attr,
> > +				    const char *buf, size_t size)
> 
> This is an irrelevant change.  Please split it out.
> 
> >  {
> >  	struct i2c_client *client = to_i2c_client(dev);
> >  	unsigned long mode_val;
> > @@ -66,11 +70,100 @@ static ssize_t menf21bmc_mode_store(struct device *dev,
> >  	return size;
> >  }
> >  
> > +static ssize_t menf21bmc_hw_variant_show(struct device *dev,
> > +					 struct device_attribute *attr,
> > +					 char *buf)
> > +{
> > +	struct i2c_client *client = to_i2c_client(dev);
> > +	int val;
> > +
> > +	val = i2c_smbus_read_word_data(client, BMC_CMD_HW_VARIANT);
> > +	if (val < 0)
> > +		return val;
> > +
> > +	return sprintf(buf, "0x%04x\n", val);
> > +
> > +}
> > +
> > +static ssize_t menf21bmc_hw_variant_store(struct device *dev,
> > +					  struct device_attribute *attr,
> > +					  const char *buf, size_t size)
> > +{
> > +	struct i2c_client *client = to_i2c_client(dev);
> > +	unsigned long hw_variant;
> > +	int ret;
> > +
> > +	if (kstrtoul(buf, 0, &hw_variant))
> > +		return -EINVAL;
> > +
> > +	if (hw_variant < 0 || hw_variant > 0xffff)
> > +		return -EINVAL;
> > +
> > +	ret = i2c_smbus_write_word_data(client, BMC_CMD_HW_VARIANT,
> > +					hw_variant);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	return size;
> > +
> > +}
> > +
> > +static ssize_t menf21bmc_pwrcycl_cnt_show(struct device *dev,
> > +					  struct device_attribute *attr,
> > +					  char *buf)
> > +{
> > +	struct i2c_client *client = to_i2c_client(dev);
> > +	int val;
> > +
> > +	val = i2c_smbus_read_word_data(client, BMC_CMD_PWRCYCL_CNT);
> > +	if (val < 0)
> > +		return val;
> > +
> > +	return sprintf(buf, "%d\n", val);
> > +}
> > +
> > +static ssize_t menf21bmc_op_hrs_cnt_show(struct device *dev,
> > +					 struct device_attribute *attr,
> > +					 char *buf)
> > +{
> > +	struct i2c_client *client = to_i2c_client(dev);
> > +	int val;
> > +
> > +	val = i2c_smbus_read_word_data(client, BMC_CMD_OP_HRS_CNT);
> > +	if (val < 0)
> > +		return val;
> > +
> > +	return sprintf(buf, "%d\n", val);
> > +}
> > +
> > +static ssize_t menf21bmc_slot_address_show(struct device *dev,
> > +					   struct device_attribute *attr,
> > +					   char *buf)
> > +{
> > +	struct i2c_client *client = to_i2c_client(dev);
> > +	int val;
> > +
> > +	val = i2c_smbus_read_byte_data(client, BMC_CMD_SLOT_ADDRESS);
> > +	if (val < 0)
> > +		return val;
> > +
> > +	return sprintf(buf, "%d\n", val);
> > +}
> > +
> >  static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, menf21bmc_mode_show,
> >  		   menf21bmc_mode_store);
> > +static DEVICE_ATTR(hw_variant, S_IRUGO | S_IWUSR, menf21bmc_hw_variant_show,
> > +		   menf21bmc_hw_variant_store);
> > +static DEVICE_ATTR(pwrcycl_cnt, S_IRUGO, menf21bmc_pwrcycl_cnt_show, NULL);
> > +static DEVICE_ATTR(op_hrs_cnt, S_IRUGO, menf21bmc_op_hrs_cnt_show, NULL);
> > +static DEVICE_ATTR(slot_address, S_IRUGO, menf21bmc_slot_address_show, NULL);
> >  
> >  static struct attribute *menf21bmc_attributes[] = {
> >  	&dev_attr_mode.attr,
> > +	&dev_attr_hw_variant.attr,
> > +	&dev_attr_pwrcycl_cnt.attr,
> > +	&dev_attr_op_hrs_cnt.attr,
> > +	&dev_attr_slot_address.attr,
> >  	NULL
> >  };
> >  
> 
> -- 
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2016-01-11 10:40 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-16 15:28 [PATCH 0/4] remove auto exit of production and added sysfs interface Andreas Werner
2015-12-16 15:29 ` [PATCH 1/4] mfd/menf21bmc: remove auto exiting of production mode and add " Andreas Werner
2016-01-11 10:32   ` Lee Jones
2016-01-11 10:33     ` Lee Jones
2016-01-11 10:49       ` Andreas Werner
2016-01-11 11:24         ` Lee Jones
2015-12-16 15:29 ` [PATCH 2/4] doc/ABI: added sysfs description for the menf21bmc MFD driver Andreas Werner
2016-01-11 10:28   ` Lee Jones
2016-01-11 10:37     ` Andreas Werner
2015-12-16 15:29 ` [PATCH 3/4] mfd/menf21bmc.c: add additional sysfs entries for BMC status information Andreas Werner
2016-01-11 10:30   ` Lee Jones
2016-01-11 10:38     ` Andreas Werner [this message]
2015-12-16 15:30 ` [PATCH 4/4] doc/ABI: add documentation for the additional sysfs " Andreas Werner
2016-01-11 10:28   ` Lee Jones
2016-01-11 10:36     ` [PATCH 4/4] doc/ABI: add documentation for the additional sysfs status informationj Andreas Werner
2016-01-06 12:45 ` [PATCH 0/4] remove auto exit of production and added sysfs interface Andreas Werner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160111103801.GC1087@awelinux \
    --to=andreas.werner@men.de \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).