linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jan Glauber <jan.glauber@caviumnetworks.com>
To: Mark Rutland <mark.rutland@arm.com>
Cc: Jan Glauber <jan.glauber@gmail.com>,
	Will Deacon <will.deacon@arm.com>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [RFC PATCH 3/5] arm64: dts: Add Cavium ThunderX specific PMU
Date: Thu, 14 Jan 2016 17:06:05 +0100	[thread overview]
Message-ID: <20160114160605.GA10182@hardcore> (raw)
In-Reply-To: <20160114144711.GC27039@leverpostej>

On Thu, Jan 14, 2016 at 02:47:12PM +0000, Mark Rutland wrote:
> Hi,
> 
> As it's the middle of the merge window, it will be a while before this
> sees a full review. In future, it would be better to wait until -rc1
> before posting new patches (appropriately rebased).

OK, fair enough. I'll repost after -rc1 if the patches don't fit
anymore.

> I did spot one thing however.
> 
> On Thu, Jan 14, 2016 at 01:55:43PM +0100, Jan Glauber wrote:
> > Add a compatible string for the Cavium ThunderX PMU.
> > 
> > Signed-off-by: Jan Glauber <jglauber@cavium.com>
> > ---
> >  Documentation/devicetree/bindings/arm/pmu.txt | 1 +
> >  arch/arm64/boot/dts/cavium/thunder-88xx.dtsi  | 5 +++++
> >  2 files changed, 6 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt
> > index 5651883..9bd0a33 100644
> > --- a/Documentation/devicetree/bindings/arm/pmu.txt
> > +++ b/Documentation/devicetree/bindings/arm/pmu.txt
> > @@ -25,6 +25,7 @@ Required properties:
> >  	"qcom,scorpion-pmu"
> >  	"qcom,scorpion-mp-pmu"
> >  	"qcom,krait-pmu"
> > +	"cavium,thunderx-pmu"
> >  - interrupts : 1 combined interrupt or 1 per core. If the interrupt is a per-cpu
> >                 interrupt (PPI) then 1 interrupt should be specified.
> >  
> > diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
> > index 9cb7cf9..84ac556 100644
> > --- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
> > +++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
> > @@ -360,6 +360,11 @@
> >  		             <1 10 0xff01>;
> >  	};
> >  
> > +	pmu {
> > +		compatible = "cavium,thunderx-pmu", "arm,armv8-pmuv3";
> 
> In current dts, "cavium,thunder" is used as the CPU compatible string.
> 
> Please decide whether you want to call the CPU "Thunder", or
> "Thunder-X", and ensure that all compatible strings are consistent.

I think we should keep the already existing name then.

thanks,
Jan

  reply	other threads:[~2016-01-14 16:21 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-14 12:55 [RFC PATCH 0/5] Cavium ThunderX PMU support Jan Glauber
2016-01-14 12:55 ` [RFC PATCH 1/5] arm64/perf: Rename Cortex A57 events Jan Glauber
2016-01-14 12:55 ` [RFC PATCH 2/5] arm64/perf: Add Cavium ThunderX PMU support Jan Glauber
2016-01-14 12:55 ` [RFC PATCH 3/5] arm64: dts: Add Cavium ThunderX specific PMU Jan Glauber
2016-01-14 14:47   ` Mark Rutland
2016-01-14 16:06     ` Jan Glauber [this message]
2016-01-14 12:55 ` [RFC PATCH 4/5] arm64/perf: Enable PMCR long cycle counter bit Jan Glauber
2016-01-14 12:55 ` [RFC PATCH 5/5] arm64/perf: Extend event mask for ARMv8.1 Jan Glauber

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160114160605.GA10182@hardcore \
    --to=jan.glauber@caviumnetworks.com \
    --cc=jan.glauber@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).