[PATCH 3.10 00/35] 3.10.95-stable review

[PATCH 3.10 00/35] 3.10.95-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.10.95 release.
There are 35 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri Jan 22 21:19:15 UTC 2016.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.10.95-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.10.95-rc1

Yevgeny Pats <yevgeny@perception-point.io>
    KEYS: Fix keyring ref leak in join_session_keyring()

David Howells <dhowells@redhat.com>
    KEYS: Fix race between read and revoke

David Howells <dhowells@redhat.com>
    KEYS: Fix crash when attempt to garbage collect an uninstantiated keyring

David Howells <dhowells@redhat.com>
    KEYS: Fix race between key destruction and finding a keyring by name

Rainer Weikusat <rweikusat@mobileactivedefense.com>
    af_unix: Revert 'lock_interruptible' in stream receive code

David S. Miller <davem@davemloft.net>
    bluetooth: Validate socket address length in sco_sock_bind().

WANG Cong <xiyou.wangcong@gmail.com>
    pptp: verify sockaddr_len in pptp_bind() and pptp_connect()

Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
    sh_eth: fix kernel oops in skb_put()

Hannes Frederic Sowa <hannes@stressinduktion.org>
    net: add validation for the socket syscall protocol argument

Eric Dumazet <edumazet@google.com>
    ipv6: sctp: clone options to avoid use after free

Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
    sctp: update the netstamp_needed counter when copying sockets

Pavel Machek <pavel@ucw.cz>
    atl1c: Improve driver not to do order 4 GFP_ATOMIC allocation

Nicolas Dichtel <nicolas.dichtel@6wind.com>
    gre6: allow to update all parameters via rtnl

Ben Hutchings <ben@decadent.org.uk>
    usb: Use the USB_SS_MULT() macro to decode burst multiplier for log message

Alexey Khoroshilov <khoroshilov@ispras.ru>
    USB: whci-hcd: add check for dma mapping error

Alan Stern <stern@rowland.harvard.edu>
    USB: add quirk for devices with broken LPM

Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>
    USB: cp210x: Remove CP2110 ID from compatibility list

Jonas Jonsson <jonas@ludd.ltu.se>
    USB: cdc_acm: Ignore Infineon Flash Loader utility

Jeff Layton <jlayton@poochiereds.net>
    nfs: if we have no valid attrs, then don't declare the attribute cache valid

Benjamin Coddington <bcodding@redhat.com>
    nfs4: start callback_ident at idr 1

Stefan Richter <stefanr@s5r6.in-berlin.de>
    firewire: ohci: fix JMicron JMB38x IT context discovery

Daeho Jeong <daeho.jeong@samsung.com>
    ext4, jbd2: ensure entering into panic after recording an error in superblock

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix race leading to BUG_ON when running delalloc for nodatacow

Eric Dumazet <edumazet@google.com>
    ipv6: sctp: implement sctp_v6_destroy_sock()

Michal Kubeček <mkubecek@suse.cz>
    ipv6: distinguish frag queues by device for multicast and link-local packets

Aaro Koskinen <aaro.koskinen@iki.fi>
    broadcom: fix PHY_ID_BCM5481 entry in the id table

Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
    net: ip6mr: fix static mfc/dev leaks on table destruction

Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
    net: ipmr: fix static mfc/dev leaks on table destruction

Daniel Borkmann <daniel@iogearbox.net>
    net, scm: fix PaX detected msg_controllen overflow in scm_detach_fds

Eric Dumazet <edumazet@google.com>
    tcp: initialize tp->copied_seq in case of cross SYN connection

Eric Dumazet <edumazet@google.com>
    tcp: md5: fix lockdep annotation

Bjørn Mork <bjorn@mork.no>
    net: qmi_wwan: add XS Stick W100-2 from 4G Systems

Neil Horman <nhorman@tuxdriver.com>
    snmp: Remove duplicate OUTMCAST stat increment

lucien <lucien.xin@gmail.com>
    sctp: translate host order to network order when setting a hmacid

Rainer Weikusat <rweikusat@mobileactivedefense.com>
    unix: avoid use-after-free in ep_remove_wait_queue


-------------

Diffstat:

 Makefile                                        |   4 +-
 drivers/firewire/ohci.c                         |   5 +
 drivers/net/ethernet/atheros/atl1c/atl1c_main.c |   7 +-
 drivers/net/ethernet/renesas/sh_eth.c           |   4 +-
 drivers/net/phy/broadcom.c                      |   2 +-
 drivers/net/ppp/pptp.c                          |   6 +
 drivers/net/usb/qmi_wwan.c                      |   1 +
 drivers/usb/class/cdc-acm.c                     |   5 +
 drivers/usb/core/config.c                       |   3 +-
 drivers/usb/core/hub.c                          |   7 +-
 drivers/usb/core/quirks.c                       |   6 +
 drivers/usb/host/whci/qset.c                    |   4 +
 drivers/usb/serial/cp210x.c                     |   1 -
 fs/btrfs/inode.c                                |  10 +-
 fs/ext4/super.c                                 |  12 +-
 fs/jbd2/journal.c                               |   6 +-
 fs/nfs/inode.c                                  |   6 +-
 fs/nfs/nfs4client.c                             |   2 +-
 include/linux/jbd2.h                            |   1 +
 include/linux/usb/quirks.h                      |   3 +
 include/net/af_unix.h                           |   1 +
 include/net/ipv6.h                              |   1 +
 include/net/sock.h                              |   3 +
 net/ax25/af_ax25.c                              |   3 +
 net/bluetooth/sco.c                             |   3 +
 net/core/scm.c                                  |   2 +
 net/core/sock.c                                 |   2 -
 net/decnet/af_decnet.c                          |   3 +
 net/ipv4/af_inet.c                              |   3 +
 net/ipv4/ipmr.c                                 |  15 +-
 net/ipv4/tcp_input.c                            |   1 +
 net/ipv4/tcp_ipv4.c                             |   3 +-
 net/ipv6/af_inet6.c                             |   3 +
 net/ipv6/ip6_gre.c                              |   8 +-
 net/ipv6/ip6mr.c                                |  15 +-
 net/ipv6/mcast.c                                |   2 -
 net/ipv6/netfilter/nf_conntrack_reasm.c         |   5 +-
 net/ipv6/reassembly.c                           |  10 +-
 net/irda/af_irda.c                              |   3 +
 net/sctp/auth.c                                 |   4 +-
 net/sctp/ipv6.c                                 |   8 +
 net/sctp/socket.c                               |  12 +-
 net/unix/af_unix.c                              | 196 ++++++++++++++++++++----
 security/keys/gc.c                              |  10 +-
 security/keys/keyctl.c                          |  18 +--
 security/keys/process_keys.c                    |   1 +
 46 files changed, 337 insertions(+), 93 deletions(-)

[PATCH 3.10 01/35] unix: avoid use-after-free in ep_remove_wait_queue

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rainer Weikusat <rweikusat@mobileactivedefense.com>

[ Upstream commit 7d267278a9ece963d77eefec61630223fce08c6c ]

Rainer Weikusat <rweikusat@mobileactivedefense.com> writes:
An AF_UNIX datagram socket being the client in an n:1 association with
some server socket is only allowed to send messages to the server if the
receive queue of this socket contains at most sk_max_ack_backlog
datagrams. This implies that prospective writers might be forced to go
to sleep despite none of the message presently enqueued on the server
receive queue were sent by them. In order to ensure that these will be
woken up once space becomes again available, the present unix_dgram_poll
routine does a second sock_poll_wait call with the peer_wait wait queue
of the server socket as queue argument (unix_dgram_recvmsg does a wake
up on this queue after a datagram was received). This is inherently
problematic because the server socket is only guaranteed to remain alive
for as long as the client still holds a reference to it. In case the
connection is dissolved via connect or by the dead peer detection logic
in unix_dgram_sendmsg, the server socket may be freed despite "the
polling mechanism" (in particular, epoll) still has a pointer to the
corresponding peer_wait queue. There's no way to forcibly deregister a
wait queue with epoll.

Based on an idea by Jason Baron, the patch below changes the code such
that a wait_queue_t belonging to the client socket is enqueued on the
peer_wait queue of the server whenever the peer receive queue full
condition is detected by either a sendmsg or a poll. A wake up on the
peer queue is then relayed to the ordinary wait queue of the client
socket via wake function. The connection to the peer wait queue is again
dissolved if either a wake up is about to be relayed or the client
socket reconnects or a dead peer is detected or the client socket is
itself closed. This enables removing the second sock_poll_wait from
unix_dgram_poll, thus avoiding the use-after-free, while still ensuring
that no blocked writer sleeps forever.

Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com>
Fixes: ec0d215f9420 ("af_unix: fix 'poll for write'/connected DGRAM sockets")
Reviewed-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/af_unix.h |    1 
 net/unix/af_unix.c    |  183 ++++++++++++++++++++++++++++++++++++++++++++------
 2 files changed, 165 insertions(+), 19 deletions(-)

--- a/include/net/af_unix.h
+++ b/include/net/af_unix.h
@@ -62,6 +62,7 @@ struct unix_sock {
 #define UNIX_GC_CANDIDATE	0
 #define UNIX_GC_MAYBE_CYCLE	1
 	struct socket_wq	peer_wq;
+	wait_queue_t		peer_wake;
 };
 
 static inline struct unix_sock *unix_sk(struct sock *sk)
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -313,6 +313,118 @@ found:
 	return s;
 }
 
+/* Support code for asymmetrically connected dgram sockets
+ *
+ * If a datagram socket is connected to a socket not itself connected
+ * to the first socket (eg, /dev/log), clients may only enqueue more
+ * messages if the present receive queue of the server socket is not
+ * "too large". This means there's a second writeability condition
+ * poll and sendmsg need to test. The dgram recv code will do a wake
+ * up on the peer_wait wait queue of a socket upon reception of a
+ * datagram which needs to be propagated to sleeping would-be writers
+ * since these might not have sent anything so far. This can't be
+ * accomplished via poll_wait because the lifetime of the server
+ * socket might be less than that of its clients if these break their
+ * association with it or if the server socket is closed while clients
+ * are still connected to it and there's no way to inform "a polling
+ * implementation" that it should let go of a certain wait queue
+ *
+ * In order to propagate a wake up, a wait_queue_t of the client
+ * socket is enqueued on the peer_wait queue of the server socket
+ * whose wake function does a wake_up on the ordinary client socket
+ * wait queue. This connection is established whenever a write (or
+ * poll for write) hit the flow control condition and broken when the
+ * association to the server socket is dissolved or after a wake up
+ * was relayed.
+ */
+
+static int unix_dgram_peer_wake_relay(wait_queue_t *q, unsigned mode, int flags,
+				      void *key)
+{
+	struct unix_sock *u;
+	wait_queue_head_t *u_sleep;
+
+	u = container_of(q, struct unix_sock, peer_wake);
+
+	__remove_wait_queue(&unix_sk(u->peer_wake.private)->peer_wait,
+			    q);
+	u->peer_wake.private = NULL;
+
+	/* relaying can only happen while the wq still exists */
+	u_sleep = sk_sleep(&u->sk);
+	if (u_sleep)
+		wake_up_interruptible_poll(u_sleep, key);
+
+	return 0;
+}
+
+static int unix_dgram_peer_wake_connect(struct sock *sk, struct sock *other)
+{
+	struct unix_sock *u, *u_other;
+	int rc;
+
+	u = unix_sk(sk);
+	u_other = unix_sk(other);
+	rc = 0;
+	spin_lock(&u_other->peer_wait.lock);
+
+	if (!u->peer_wake.private) {
+		u->peer_wake.private = other;
+		__add_wait_queue(&u_other->peer_wait, &u->peer_wake);
+
+		rc = 1;
+	}
+
+	spin_unlock(&u_other->peer_wait.lock);
+	return rc;
+}
+
+static void unix_dgram_peer_wake_disconnect(struct sock *sk,
+					    struct sock *other)
+{
+	struct unix_sock *u, *u_other;
+
+	u = unix_sk(sk);
+	u_other = unix_sk(other);
+	spin_lock(&u_other->peer_wait.lock);
+
+	if (u->peer_wake.private == other) {
+		__remove_wait_queue(&u_other->peer_wait, &u->peer_wake);
+		u->peer_wake.private = NULL;
+	}
+
+	spin_unlock(&u_other->peer_wait.lock);
+}
+
+static void unix_dgram_peer_wake_disconnect_wakeup(struct sock *sk,
+						   struct sock *other)
+{
+	unix_dgram_peer_wake_disconnect(sk, other);
+	wake_up_interruptible_poll(sk_sleep(sk),
+				   POLLOUT |
+				   POLLWRNORM |
+				   POLLWRBAND);
+}
+
+/* preconditions:
+ *	- unix_peer(sk) == other
+ *	- association is stable
+ */
+static int unix_dgram_peer_wake_me(struct sock *sk, struct sock *other)
+{
+	int connected;
+
+	connected = unix_dgram_peer_wake_connect(sk, other);
+
+	if (unix_recvq_full(other))
+		return 1;
+
+	if (connected)
+		unix_dgram_peer_wake_disconnect(sk, other);
+
+	return 0;
+}
+
 static inline int unix_writable(struct sock *sk)
 {
 	return (atomic_read(&sk->sk_wmem_alloc) << 2) <= sk->sk_sndbuf;
@@ -417,6 +529,8 @@ static void unix_release_sock(struct soc
 			skpair->sk_state_change(skpair);
 			sk_wake_async(skpair, SOCK_WAKE_WAITD, POLL_HUP);
 		}
+
+		unix_dgram_peer_wake_disconnect(sk, skpair);
 		sock_put(skpair); /* It may now die */
 		unix_peer(sk) = NULL;
 	}
@@ -650,6 +764,7 @@ static struct sock *unix_create1(struct
 	INIT_LIST_HEAD(&u->link);
 	mutex_init(&u->readlock); /* single task reading lock */
 	init_waitqueue_head(&u->peer_wait);
+	init_waitqueue_func_entry(&u->peer_wake, unix_dgram_peer_wake_relay);
 	unix_insert_socket(unix_sockets_unbound(sk), sk);
 out:
 	if (sk == NULL)
@@ -1017,6 +1132,8 @@ restart:
 	if (unix_peer(sk)) {
 		struct sock *old_peer = unix_peer(sk);
 		unix_peer(sk) = other;
+		unix_dgram_peer_wake_disconnect_wakeup(sk, old_peer);
+
 		unix_state_double_unlock(sk, other);
 
 		if (other != old_peer)
@@ -1456,6 +1573,7 @@ static int unix_dgram_sendmsg(struct kio
 	struct scm_cookie tmp_scm;
 	int max_level;
 	int data_len = 0;
+	int sk_locked;
 
 	if (NULL == siocb->scm)
 		siocb->scm = &tmp_scm;
@@ -1532,12 +1650,14 @@ restart:
 		goto out_free;
 	}
 
+	sk_locked = 0;
 	unix_state_lock(other);
+restart_locked:
 	err = -EPERM;
 	if (!unix_may_send(sk, other))
 		goto out_unlock;
 
-	if (sock_flag(other, SOCK_DEAD)) {
+	if (unlikely(sock_flag(other, SOCK_DEAD))) {
 		/*
 		 *	Check with 1003.1g - what should
 		 *	datagram error
@@ -1545,10 +1665,14 @@ restart:
 		unix_state_unlock(other);
 		sock_put(other);
 
+		if (!sk_locked)
+			unix_state_lock(sk);
+
 		err = 0;
-		unix_state_lock(sk);
 		if (unix_peer(sk) == other) {
 			unix_peer(sk) = NULL;
+			unix_dgram_peer_wake_disconnect_wakeup(sk, other);
+
 			unix_state_unlock(sk);
 
 			unix_dgram_disconnected(sk, other);
@@ -1574,21 +1698,38 @@ restart:
 			goto out_unlock;
 	}
 
-	if (unix_peer(other) != sk && unix_recvq_full(other)) {
-		if (!timeo) {
-			err = -EAGAIN;
-			goto out_unlock;
+	if (unlikely(unix_peer(other) != sk && unix_recvq_full(other))) {
+		if (timeo) {
+			timeo = unix_wait_for_peer(other, timeo);
+
+			err = sock_intr_errno(timeo);
+			if (signal_pending(current))
+				goto out_free;
+
+			goto restart;
 		}
 
-		timeo = unix_wait_for_peer(other, timeo);
+		if (!sk_locked) {
+			unix_state_unlock(other);
+			unix_state_double_lock(sk, other);
+		}
 
-		err = sock_intr_errno(timeo);
-		if (signal_pending(current))
-			goto out_free;
+		if (unix_peer(sk) != other ||
+		    unix_dgram_peer_wake_me(sk, other)) {
+			err = -EAGAIN;
+			sk_locked = 1;
+			goto out_unlock;
+		}
 
-		goto restart;
+		if (!sk_locked) {
+			sk_locked = 1;
+			goto restart_locked;
+		}
 	}
 
+	if (unlikely(sk_locked))
+		unix_state_unlock(sk);
+
 	if (sock_flag(other, SOCK_RCVTSTAMP))
 		__net_timestamp(skb);
 	maybe_add_creds(skb, sock, other);
@@ -1602,6 +1743,8 @@ restart:
 	return len;
 
 out_unlock:
+	if (sk_locked)
+		unix_state_unlock(sk);
 	unix_state_unlock(other);
 out_free:
 	kfree_skb(skb);
@@ -2260,14 +2403,16 @@ static unsigned int unix_dgram_poll(stru
 		return mask;
 
 	writable = unix_writable(sk);
-	other = unix_peer_get(sk);
-	if (other) {
-		if (unix_peer(other) != sk) {
-			sock_poll_wait(file, &unix_sk(other)->peer_wait, wait);
-			if (unix_recvq_full(other))
-				writable = 0;
-		}
-		sock_put(other);
+	if (writable) {
+		unix_state_lock(sk);
+
+		other = unix_peer(sk);
+		if (other && unix_peer(other) != sk &&
+		    unix_recvq_full(other) &&
+		    unix_dgram_peer_wake_me(sk, other))
+			writable = 0;
+
+		unix_state_unlock(sk);
 	}
 
 	if (writable)

[PATCH 3.10 02/35] sctp: translate host order to network order when setting a hmacid

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: lucien <lucien.xin@gmail.com>

[ Upstream commit ed5a377d87dc4c87fb3e1f7f698cba38cd893103 ]

now sctp auth cannot work well when setting a hmacid manually, which
is caused by that we didn't use the network order for hmacid, so fix
it by adding the transformation in sctp_auth_ep_set_hmacs.

even we set hmacid with the network order in userspace, it still
can't work, because of this condition in sctp_auth_ep_set_hmacs():

		if (id > SCTP_AUTH_HMAC_ID_MAX)
			return -EOPNOTSUPP;

so this wasn't working before and thus it won't break compatibility.

Fixes: 65b07e5d0d09 ("[SCTP]: API updates to suport SCTP-AUTH extensions.")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/auth.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/sctp/auth.c
+++ b/net/sctp/auth.c
@@ -812,8 +812,8 @@ int sctp_auth_ep_set_hmacs(struct sctp_e
 	if (!has_sha1)
 		return -EINVAL;
 
-	memcpy(ep->auth_hmacs_list->hmac_ids, &hmacs->shmac_idents[0],
-		hmacs->shmac_num_idents * sizeof(__u16));
+	for (i = 0; i < hmacs->shmac_num_idents; i++)
+		ep->auth_hmacs_list->hmac_ids[i] = htons(hmacs->shmac_idents[i]);
 	ep->auth_hmacs_list->param_hdr.length = htons(sizeof(sctp_paramhdr_t) +
 				hmacs->shmac_num_idents * sizeof(__u16));
 	return 0;

[PATCH 3.10 03/35] snmp: Remove duplicate OUTMCAST stat increment

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Neil Horman <nhorman@tuxdriver.com>

[ Upstream commit 41033f029e393a64e81966cbe34d66c6cf8a2e7e ]

the OUTMCAST stat is double incremented, getting bumped once in the mcast code
itself, and again in the common ip output path.  Remove the mcast bump, as its
not needed

Validated by the reporter, with good results

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Claus Jensen <claus.jensen@microsemi.com>
CC: Claus Jensen <claus.jensen@microsemi.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/mcast.c |    2 --
 1 file changed, 2 deletions(-)

--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1441,7 +1441,6 @@ out:
 	if (!err) {
 		ICMP6MSGOUT_INC_STATS(net, idev, ICMPV6_MLD2_REPORT);
 		ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
-		IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUTMCAST, payload_len);
 	} else {
 		IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTDISCARDS);
 	}
@@ -1805,7 +1804,6 @@ out:
 	if (!err) {
 		ICMP6MSGOUT_INC_STATS(net, idev, type);
 		ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
-		IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUTMCAST, full_len);
 	} else
 		IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTDISCARDS);
 

[PATCH 3.10 05/35] tcp: md5: fix lockdep annotation

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 1b8e6a01e19f001e9f93b39c32387961c91ed3cc ]

When a passive TCP is created, we eventually call tcp_md5_do_add()
with sk pointing to the child. It is not owner by the user yet (we
will add this socket into listener accept queue a bit later anyway)

But we do own the spinlock, so amend the lockdep annotation to avoid
following splat :

[ 8451.090932] net/ipv4/tcp_ipv4.c:923 suspicious rcu_dereference_protected() usage!
[ 8451.090932]
[ 8451.090932] other info that might help us debug this:
[ 8451.090932]
[ 8451.090934]
[ 8451.090934] rcu_scheduler_active = 1, debug_locks = 1
[ 8451.090936] 3 locks held by socket_sockopt_/214795:
[ 8451.090936]  #0:  (rcu_read_lock){.+.+..}, at: [<ffffffff855c6ac1>] __netif_receive_skb_core+0x151/0xe90
[ 8451.090947]  #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff85618143>] ip_local_deliver_finish+0x43/0x2b0
[ 8451.090952]  #2:  (slock-AF_INET){+.-...}, at: [<ffffffff855acda5>] sk_clone_lock+0x1c5/0x500
[ 8451.090958]
[ 8451.090958] stack backtrace:
[ 8451.090960] CPU: 7 PID: 214795 Comm: socket_sockopt_

[ 8451.091215] Call Trace:
[ 8451.091216]  <IRQ>  [<ffffffff856fb29c>] dump_stack+0x55/0x76
[ 8451.091229]  [<ffffffff85123b5b>] lockdep_rcu_suspicious+0xeb/0x110
[ 8451.091235]  [<ffffffff8564544f>] tcp_md5_do_add+0x1bf/0x1e0
[ 8451.091239]  [<ffffffff85645751>] tcp_v4_syn_recv_sock+0x1f1/0x4c0
[ 8451.091242]  [<ffffffff85642b27>] ? tcp_v4_md5_hash_skb+0x167/0x190
[ 8451.091246]  [<ffffffff85647c78>] tcp_check_req+0x3c8/0x500
[ 8451.091249]  [<ffffffff856451ae>] ? tcp_v4_inbound_md5_hash+0x11e/0x190
[ 8451.091253]  [<ffffffff85647170>] tcp_v4_rcv+0x3c0/0x9f0
[ 8451.091256]  [<ffffffff85618143>] ? ip_local_deliver_finish+0x43/0x2b0
[ 8451.091260]  [<ffffffff856181b6>] ip_local_deliver_finish+0xb6/0x2b0
[ 8451.091263]  [<ffffffff85618143>] ? ip_local_deliver_finish+0x43/0x2b0
[ 8451.091267]  [<ffffffff85618d38>] ip_local_deliver+0x48/0x80
[ 8451.091270]  [<ffffffff85618510>] ip_rcv_finish+0x160/0x700
[ 8451.091273]  [<ffffffff8561900e>] ip_rcv+0x29e/0x3d0
[ 8451.091277]  [<ffffffff855c74b7>] __netif_receive_skb_core+0xb47/0xe90

Fixes: a8afca0329988 ("tcp: md5: protects md5sig_info with RCU")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_ipv4.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1015,7 +1015,8 @@ int tcp_md5_do_add(struct sock *sk, cons
 	}
 
 	md5sig = rcu_dereference_protected(tp->md5sig_info,
-					   sock_owned_by_user(sk));
+					   sock_owned_by_user(sk) ||
+					   lockdep_is_held(&sk->sk_lock.slock));
 	if (!md5sig) {
 		md5sig = kmalloc(sizeof(*md5sig), gfp);
 		if (!md5sig)

[PATCH 3.10 06/35] tcp: initialize tp->copied_seq in case of cross SYN connection

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 142a2e7ece8d8ac0e818eb2c91f99ca894730e2a ]

Dmitry provided a syzkaller (http://github.com/google/syzkaller)
generated program that triggers the WARNING at
net/ipv4/tcp.c:1729 in tcp_recvmsg() :

WARN_ON(tp->copied_seq != tp->rcv_nxt &&
        !(flags & (MSG_PEEK | MSG_TRUNC)));

His program is specifically attempting a Cross SYN TCP exchange,
that we support (for the pleasure of hackers ?), but it looks we
lack proper tcp->copied_seq initialization.

Thanks again Dmitry for your report and testings.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5575,6 +5575,7 @@ discard:
 		}
 
 		tp->rcv_nxt = TCP_SKB_CB(skb)->seq + 1;
+		tp->copied_seq = tp->rcv_nxt;
 		tp->rcv_wup = TCP_SKB_CB(skb)->seq + 1;
 
 		/* RFC1323: The window in SYN & SYN/ACK segments is

[PATCH 3.10 07/35] net, scm: fix PaX detected msg_controllen overflow in scm_detach_fds

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann <daniel@iogearbox.net>

[ Upstream commit 6900317f5eff0a7070c5936e5383f589e0de7a09 ]

David and HacKurx reported a following/similar size overflow triggered
in a grsecurity kernel, thanks to PaX's gcc size overflow plugin:

(Already fixed in later grsecurity versions by Brad and PaX Team.)

[ 1002.296137] PAX: size overflow detected in function scm_detach_fds net/core/scm.c:314
               cicus.202_127 min, count: 4, decl: msg_controllen; num: 0; context: msghdr;
[ 1002.296145] CPU: 0 PID: 3685 Comm: scm_rights_recv Not tainted 4.2.3-grsec+ #7
[ 1002.296149] Hardware name: Apple Inc. MacBookAir5,1/Mac-66F35F19FE2A0D05, [...]
[ 1002.296153]  ffffffff81c27366 0000000000000000 ffffffff81c27375 ffffc90007843aa8
[ 1002.296162]  ffffffff818129ba 0000000000000000 ffffffff81c27366 ffffc90007843ad8
[ 1002.296169]  ffffffff8121f838 fffffffffffffffc fffffffffffffffc ffffc90007843e60
[ 1002.296176] Call Trace:
[ 1002.296190]  [<ffffffff818129ba>] dump_stack+0x45/0x57
[ 1002.296200]  [<ffffffff8121f838>] report_size_overflow+0x38/0x60
[ 1002.296209]  [<ffffffff816a979e>] scm_detach_fds+0x2ce/0x300
[ 1002.296220]  [<ffffffff81791899>] unix_stream_read_generic+0x609/0x930
[ 1002.296228]  [<ffffffff81791c9f>] unix_stream_recvmsg+0x4f/0x60
[ 1002.296236]  [<ffffffff8178dc00>] ? unix_set_peek_off+0x50/0x50
[ 1002.296243]  [<ffffffff8168fac7>] sock_recvmsg+0x47/0x60
[ 1002.296248]  [<ffffffff81691522>] ___sys_recvmsg+0xe2/0x1e0
[ 1002.296257]  [<ffffffff81693496>] __sys_recvmsg+0x46/0x80
[ 1002.296263]  [<ffffffff816934fc>] SyS_recvmsg+0x2c/0x40
[ 1002.296271]  [<ffffffff8181a3ab>] entry_SYSCALL_64_fastpath+0x12/0x85

Further investigation showed that this can happen when an *odd* number of
fds are being passed over AF_UNIX sockets.

In these cases CMSG_LEN(i * sizeof(int)) and CMSG_SPACE(i * sizeof(int)),
where i is the number of successfully passed fds, differ by 4 bytes due
to the extra CMSG_ALIGN() padding in CMSG_SPACE() to an 8 byte boundary
on 64 bit. The padding is used to align subsequent cmsg headers in the
control buffer.

When the control buffer passed in from the receiver side *lacks* these 4
bytes (e.g. due to buggy/wrong API usage), then msg->msg_controllen will
overflow in scm_detach_fds():

  int cmlen = CMSG_LEN(i * sizeof(int));  <--- cmlen w/o tail-padding
  err = put_user(SOL_SOCKET, &cm->cmsg_level);
  if (!err)
    err = put_user(SCM_RIGHTS, &cm->cmsg_type);
  if (!err)
    err = put_user(cmlen, &cm->cmsg_len);
  if (!err) {
    cmlen = CMSG_SPACE(i * sizeof(int));  <--- cmlen w/ 4 byte extra tail-padding
    msg->msg_control += cmlen;
    msg->msg_controllen -= cmlen;         <--- iff no tail-padding space here ...
  }                                            ... wrap-around

F.e. it will wrap to a length of 18446744073709551612 bytes in case the
receiver passed in msg->msg_controllen of 20 bytes, and the sender
properly transferred 1 fd to the receiver, so that its CMSG_LEN results
in 20 bytes and CMSG_SPACE in 24 bytes.

In case of MSG_CMSG_COMPAT (scm_detach_fds_compat()), I haven't seen an
issue in my tests as alignment seems always on 4 byte boundary. Same
should be in case of native 32 bit, where we end up with 4 byte boundaries
as well.

In practice, passing msg->msg_controllen of 20 to recvmsg() while receiving
a single fd would mean that on successful return, msg->msg_controllen is
being set by the kernel to 24 bytes instead, thus more than the input
buffer advertised. It could f.e. become an issue if such application later
on zeroes or copies the control buffer based on the returned msg->msg_controllen
elsewhere.

Maximum number of fds we can send is a hard upper limit SCM_MAX_FD (253).

Going over the code, it seems like msg->msg_controllen is not being read
after scm_detach_fds() in scm_recv() anymore by the kernel, good!

Relevant recvmsg() handler are unix_dgram_recvmsg() (unix_seqpacket_recvmsg())
and unix_stream_recvmsg(). Both return back to their recvmsg() caller,
and ___sys_recvmsg() places the updated length, that is, new msg_control -
old msg_control pointer into msg->msg_controllen (hence the 24 bytes seen
in the example).

Long time ago, Wei Yongjun fixed something related in commit 1ac70e7ad24a
("[NET]: Fix function put_cmsg() which may cause usr application memory
overflow").

RFC3542, section 20.2. says:

  The fields shown as "XX" are possible padding, between the cmsghdr
  structure and the data, and between the data and the next cmsghdr
  structure, if required by the implementation. While sending an
  application may or may not include padding at the end of last
  ancillary data in msg_controllen and implementations must accept both
  as valid. On receiving a portable application must provide space for
  padding at the end of the last ancillary data as implementations may
  copy out the padding at the end of the control message buffer and
  include it in the received msg_controllen. When recvmsg() is called
  if msg_controllen is too small for all the ancillary data items
  including any trailing padding after the last item an implementation
  may set MSG_CTRUNC.

Since we didn't place MSG_CTRUNC for already quite a long time, just do
the same as in 1ac70e7ad24a to avoid an overflow.

Btw, even man-page author got this wrong :/ See db939c9b26e9 ("cmsg.3: Fix
error in SCM_RIGHTS code sample"). Some people must have copied this (?),
thus it got triggered in the wild (reported several times during boot by
David and HacKurx).

No Fixes tag this time as pre 2002 (that is, pre history tree).

Reported-by: David Sterba <dave@jikos.cz>
Reported-by: HacKurx <hackurx@gmail.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/scm.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/core/scm.c
+++ b/net/core/scm.c
@@ -306,6 +306,8 @@ void scm_detach_fds(struct msghdr *msg,
 			err = put_user(cmlen, &cm->cmsg_len);
 		if (!err) {
 			cmlen = CMSG_SPACE(i*sizeof(int));
+			if (msg->msg_controllen < cmlen)
+				cmlen = msg->msg_controllen;
 			msg->msg_control += cmlen;
 			msg->msg_controllen -= cmlen;
 		}

[PATCH 3.10 08/35] net: ipmr: fix static mfc/dev leaks on table destruction

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

[ Upstream commit 0e615e9601a15efeeb8942cf7cd4dadba0c8c5a7 ]

When destroying an mrt table the static mfc entries and the static
devices are kept, which leads to devices that can never be destroyed
(because of refcnt taken) and leaked memory, for example:
unreferenced object 0xffff880034c144c0 (size 192):
  comm "mfc-broken", pid 4777, jiffies 4320349055 (age 46001.964s)
  hex dump (first 32 bytes):
    98 53 f0 34 00 88 ff ff 98 53 f0 34 00 88 ff ff  .S.4.....S.4....
    ef 0a 0a 14 01 02 03 04 00 00 00 00 01 00 00 00  ................
  backtrace:
    [<ffffffff815c1b9e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff811ea6e0>] kmem_cache_alloc+0x190/0x300
    [<ffffffff815931cb>] ip_mroute_setsockopt+0x5cb/0x910
    [<ffffffff8153d575>] do_ip_setsockopt.isra.11+0x105/0xff0
    [<ffffffff8153e490>] ip_setsockopt+0x30/0xa0
    [<ffffffff81564e13>] raw_setsockopt+0x33/0x90
    [<ffffffff814d1e14>] sock_common_setsockopt+0x14/0x20
    [<ffffffff814d0b51>] SyS_setsockopt+0x71/0xc0
    [<ffffffff815cdbf6>] entry_SYSCALL_64_fastpath+0x16/0x7a
    [<ffffffffffffffff>] 0xffffffffffffffff

Make sure that everything is cleaned on netns destruction.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ipmr.c |   15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -136,7 +136,7 @@ static int __ipmr_fill_mroute(struct mr_
 			      struct mfc_cache *c, struct rtmsg *rtm);
 static void mroute_netlink_event(struct mr_table *mrt, struct mfc_cache *mfc,
 				 int cmd);
-static void mroute_clean_tables(struct mr_table *mrt);
+static void mroute_clean_tables(struct mr_table *mrt, bool all);
 static void ipmr_expire_process(unsigned long arg);
 
 #ifdef CONFIG_IP_MROUTE_MULTIPLE_TABLES
@@ -348,7 +348,7 @@ static struct mr_table *ipmr_new_table(s
 static void ipmr_free_table(struct mr_table *mrt)
 {
 	del_timer_sync(&mrt->ipmr_expire_timer);
-	mroute_clean_tables(mrt);
+	mroute_clean_tables(mrt, true);
 	kfree(mrt);
 }
 
@@ -1199,7 +1199,7 @@ static int ipmr_mfc_add(struct net *net,
  *	Close the multicast socket, and clear the vif tables etc
  */
 
-static void mroute_clean_tables(struct mr_table *mrt)
+static void mroute_clean_tables(struct mr_table *mrt, bool all)
 {
 	int i;
 	LIST_HEAD(list);
@@ -1208,8 +1208,9 @@ static void mroute_clean_tables(struct m
 	/* Shut down all active vif entries */
 
 	for (i = 0; i < mrt->maxvif; i++) {
-		if (!(mrt->vif_table[i].flags & VIFF_STATIC))
-			vif_delete(mrt, i, 0, &list);
+		if (!all && (mrt->vif_table[i].flags & VIFF_STATIC))
+			continue;
+		vif_delete(mrt, i, 0, &list);
 	}
 	unregister_netdevice_many(&list);
 
@@ -1217,7 +1218,7 @@ static void mroute_clean_tables(struct m
 
 	for (i = 0; i < MFC_LINES; i++) {
 		list_for_each_entry_safe(c, next, &mrt->mfc_cache_array[i], list) {
-			if (c->mfc_flags & MFC_STATIC)
+			if (!all && (c->mfc_flags & MFC_STATIC))
 				continue;
 			list_del_rcu(&c->list);
 			mroute_netlink_event(mrt, c, RTM_DELROUTE);
@@ -1252,7 +1253,7 @@ static void mrtsock_destruct(struct sock
 						    NETCONFA_IFINDEX_ALL,
 						    net->ipv4.devconf_all);
 			RCU_INIT_POINTER(mrt->mroute_sk, NULL);
-			mroute_clean_tables(mrt);
+			mroute_clean_tables(mrt, false);
 		}
 	}
 	rtnl_unlock();

[PATCH 3.10 09/35] net: ip6mr: fix static mfc/dev leaks on table destruction

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

[ Upstream commit 4c6980462f32b4f282c5d8e5f7ea8070e2937725 ]

Similar to ipv4, when destroying an mrt table the static mfc entries and
the static devices are kept, which leads to devices that can never be
destroyed (because of refcnt taken) and leaked memory. Make sure that
everything is cleaned up on netns destruction.

Fixes: 8229efdaef1e ("netns: ip6mr: enable namespace support in ipv6 multicast forwarding code")
CC: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6mr.c |   15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -120,7 +120,7 @@ static void mr6_netlink_event(struct mr6
 			      int cmd);
 static int ip6mr_rtm_dumproute(struct sk_buff *skb,
 			       struct netlink_callback *cb);
-static void mroute_clean_tables(struct mr6_table *mrt);
+static void mroute_clean_tables(struct mr6_table *mrt, bool all);
 static void ipmr_expire_process(unsigned long arg);
 
 #ifdef CONFIG_IPV6_MROUTE_MULTIPLE_TABLES
@@ -337,7 +337,7 @@ static struct mr6_table *ip6mr_new_table
 static void ip6mr_free_table(struct mr6_table *mrt)
 {
 	del_timer(&mrt->ipmr_expire_timer);
-	mroute_clean_tables(mrt);
+	mroute_clean_tables(mrt, true);
 	kfree(mrt);
 }
 
@@ -1537,7 +1537,7 @@ static int ip6mr_mfc_add(struct net *net
  *	Close the multicast socket, and clear the vif tables etc
  */
 
-static void mroute_clean_tables(struct mr6_table *mrt)
+static void mroute_clean_tables(struct mr6_table *mrt, bool all)
 {
 	int i;
 	LIST_HEAD(list);
@@ -1547,8 +1547,9 @@ static void mroute_clean_tables(struct m
 	 *	Shut down all active vif entries
 	 */
 	for (i = 0; i < mrt->maxvif; i++) {
-		if (!(mrt->vif6_table[i].flags & VIFF_STATIC))
-			mif6_delete(mrt, i, &list);
+		if (!all && (mrt->vif6_table[i].flags & VIFF_STATIC))
+			continue;
+		mif6_delete(mrt, i, &list);
 	}
 	unregister_netdevice_many(&list);
 
@@ -1557,7 +1558,7 @@ static void mroute_clean_tables(struct m
 	 */
 	for (i = 0; i < MFC6_LINES; i++) {
 		list_for_each_entry_safe(c, next, &mrt->mfc6_cache_array[i], list) {
-			if (c->mfc_flags & MFC_STATIC)
+			if (!all && (c->mfc_flags & MFC_STATIC))
 				continue;
 			write_lock_bh(&mrt_lock);
 			list_del(&c->list);
@@ -1620,7 +1621,7 @@ int ip6mr_sk_done(struct sock *sk)
 						     net->ipv6.devconf_all);
 			write_unlock_bh(&mrt_lock);
 
-			mroute_clean_tables(mrt);
+			mroute_clean_tables(mrt, false);
 			err = 0;
 			break;
 		}

[PATCH 3.10 10/35] broadcom: fix PHY_ID_BCM5481 entry in the id table

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaro Koskinen <aaro.koskinen@iki.fi>

[ Upstream commit 3c25a860d17b7378822f35d8c9141db9507e3beb ]

Commit fcb26ec5b18d ("broadcom: move all PHY_ID's to header")
updated broadcom_tbl to use PHY_IDs, but incorrectly replaced 0x0143bca0
with PHY_ID_BCM5482 (making a duplicate entry, and completely omitting
the original). Fix that.

Fixes: fcb26ec5b18d ("broadcom: move all PHY_ID's to header")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/broadcom.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -848,7 +848,7 @@ static struct mdio_device_id __maybe_unu
 	{ PHY_ID_BCM5421, 0xfffffff0 },
 	{ PHY_ID_BCM5461, 0xfffffff0 },
 	{ PHY_ID_BCM5464, 0xfffffff0 },
-	{ PHY_ID_BCM5482, 0xfffffff0 },
+	{ PHY_ID_BCM5481, 0xfffffff0 },
 	{ PHY_ID_BCM5482, 0xfffffff0 },
 	{ PHY_ID_BCM50610, 0xfffffff0 },
 	{ PHY_ID_BCM50610M, 0xfffffff0 },

[PATCH 3.10 11/35] ipv6: distinguish frag queues by device for multicast and link-local packets

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: =?UTF-8?q?Michal=20Kube=C4=8Dek?= <mkubecek@suse.cz>

[ Upstream commit 264640fc2c5f4f913db5c73fa3eb1ead2c45e9d7 ]

If a fragmented multicast packet is received on an ethernet device which
has an active macvlan on top of it, each fragment is duplicated and
received both on the underlying device and the macvlan. If some
fragments for macvlan are processed before the whole packet for the
underlying device is reassembled, the "overlapping fragments" test in
ip6_frag_queue() discards the whole fragment queue.

To resolve this, add device ifindex to the search key and require it to
match reassembling multicast packets and packets to link-local
addresses.

Note: similar patch has been already submitted by Yoshifuji Hideaki in

  http://patchwork.ozlabs.org/patch/220979/

but got lost and forgotten for some reason.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ipv6.h                      |    1 +
 net/ipv6/netfilter/nf_conntrack_reasm.c |    5 +++--
 net/ipv6/reassembly.c                   |   10 +++++++---
 3 files changed, 11 insertions(+), 5 deletions(-)

--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -478,6 +478,7 @@ struct ip6_create_arg {
 	u32 user;
 	const struct in6_addr *src;
 	const struct in6_addr *dst;
+	int iif;
 	u8 ecn;
 };
 
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -172,7 +172,7 @@ static void nf_ct_frag6_expire(unsigned
 /* Creation primitives. */
 static inline struct frag_queue *fq_find(struct net *net, __be32 id,
 					 u32 user, struct in6_addr *src,
-					 struct in6_addr *dst, u8 ecn)
+					 struct in6_addr *dst, int iif, u8 ecn)
 {
 	struct inet_frag_queue *q;
 	struct ip6_create_arg arg;
@@ -182,6 +182,7 @@ static inline struct frag_queue *fq_find
 	arg.user = user;
 	arg.src = src;
 	arg.dst = dst;
+	arg.iif = iif;
 	arg.ecn = ecn;
 
 	read_lock_bh(&nf_frags.lock);
@@ -590,7 +591,7 @@ struct sk_buff *nf_ct_frag6_gather(struc
 	local_bh_enable();
 
 	fq = fq_find(net, fhdr->identification, user, &hdr->saddr, &hdr->daddr,
-		     ip6_frag_ecn(hdr));
+		     skb->dev ? skb->dev->ifindex : 0, ip6_frag_ecn(hdr));
 	if (fq == NULL) {
 		pr_debug("Can't find and can't create new queue\n");
 		goto ret_orig;
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -111,7 +111,10 @@ bool ip6_frag_match(struct inet_frag_que
 	return	fq->id == arg->id &&
 		fq->user == arg->user &&
 		ipv6_addr_equal(&fq->saddr, arg->src) &&
-		ipv6_addr_equal(&fq->daddr, arg->dst);
+		ipv6_addr_equal(&fq->daddr, arg->dst) &&
+		(arg->iif == fq->iif ||
+		 !(ipv6_addr_type(arg->dst) & (IPV6_ADDR_MULTICAST |
+					       IPV6_ADDR_LINKLOCAL)));
 }
 EXPORT_SYMBOL(ip6_frag_match);
 
@@ -180,7 +183,7 @@ static void ip6_frag_expire(unsigned lon
 
 static __inline__ struct frag_queue *
 fq_find(struct net *net, __be32 id, const struct in6_addr *src,
-	const struct in6_addr *dst, u8 ecn)
+	const struct in6_addr *dst, int iif, u8 ecn)
 {
 	struct inet_frag_queue *q;
 	struct ip6_create_arg arg;
@@ -190,6 +193,7 @@ fq_find(struct net *net, __be32 id, cons
 	arg.user = IP6_DEFRAG_LOCAL_DELIVER;
 	arg.src = src;
 	arg.dst = dst;
+	arg.iif = iif;
 	arg.ecn = ecn;
 
 	read_lock(&ip6_frags.lock);
@@ -558,7 +562,7 @@ static int ipv6_frag_rcv(struct sk_buff
 				 IPSTATS_MIB_REASMFAILS, evicted);
 
 	fq = fq_find(net, fhdr->identification, &hdr->saddr, &hdr->daddr,
-		     ip6_frag_ecn(hdr));
+		     skb->dev ? skb->dev->ifindex : 0, ip6_frag_ecn(hdr));
 	if (fq != NULL) {
 		int ret;
 

[PATCH 3.10 12/35] ipv6: sctp: implement sctp_v6_destroy_sock()

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 602dd62dfbda3e63a2d6a3cbde953ebe82bf5087 ]

Dmitry Vyukov reported a memory leak using IPV6 SCTP sockets.

We need to call inet6_destroy_sock() to properly release
inet6 specific fields.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/socket.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -7149,6 +7149,13 @@ struct proto sctp_prot = {
 
 #if IS_ENABLED(CONFIG_IPV6)
 
+#include <net/transp_v6.h>
+static void sctp_v6_destroy_sock(struct sock *sk)
+{
+	sctp_destroy_sock(sk);
+	inet6_destroy_sock(sk);
+}
+
 struct proto sctpv6_prot = {
 	.name		= "SCTPv6",
 	.owner		= THIS_MODULE,
@@ -7158,7 +7165,7 @@ struct proto sctpv6_prot = {
 	.accept		= sctp_accept,
 	.ioctl		= sctp_ioctl,
 	.init		= sctp_init_sock,
-	.destroy	= sctp_destroy_sock,
+	.destroy	= sctp_v6_destroy_sock,
 	.shutdown	= sctp_shutdown,
 	.setsockopt	= sctp_setsockopt,
 	.getsockopt	= sctp_getsockopt,

[PATCH 3.10 13/35] Btrfs: fix race leading to BUG_ON when running delalloc for nodatacow

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@suse.com>

commit 1d512cb77bdbda80f0dd0620a3b260d697fd581d upstream.

If we are using the NO_HOLES feature, we have a tiny time window when
running delalloc for a nodatacow inode where we can race with a concurrent
link or xattr add operation leading to a BUG_ON.

This happens because at run_delalloc_nocow() we end up casting a leaf item
of type BTRFS_INODE_[REF|EXTREF]_KEY or of type BTRFS_XATTR_ITEM_KEY to a
file extent item (struct btrfs_file_extent_item) and then analyse its
extent type field, which won't match any of the expected extent types
(values BTRFS_FILE_EXTENT_[REG|PREALLOC|INLINE]) and therefore trigger an
explicit BUG_ON(1).

The following sequence diagram shows how the race happens when running a
no-cow dellaloc range [4K, 8K[ for inode 257 and we have the following
neighbour leafs:

             Leaf X (has N items)                    Leaf Y

 [ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ]  [ (257 EXTENT_DATA 8192), ... ]
              slot N - 2         slot N - 1              slot 0

 (Note the implicit hole for inode 257 regarding the [0, 8K[ range)

       CPU 1                                         CPU 2

 run_dealloc_nocow()
   btrfs_lookup_file_extent()
     --> searches for a key with value
         (257 EXTENT_DATA 4096) in the
         fs/subvol tree
     --> returns us a path with
         path->nodes[0] == leaf X and
         path->slots[0] == N

   because path->slots[0] is >=
   btrfs_header_nritems(leaf X), it
   calls btrfs_next_leaf()

   btrfs_next_leaf()
     --> releases the path

                                              hard link added to our inode,
                                              with key (257 INODE_REF 500)
                                              added to the end of leaf X,
                                              so leaf X now has N + 1 keys

     --> searches for the key
         (257 INODE_REF 256), because
         it was the last key in leaf X
         before it released the path,
         with path->keep_locks set to 1

     --> ends up at leaf X again and
         it verifies that the key
         (257 INODE_REF 256) is no longer
         the last key in the leaf, so it
         returns with path->nodes[0] ==
         leaf X and path->slots[0] == N,
         pointing to the new item with
         key (257 INODE_REF 500)

   the loop iteration of run_dealloc_nocow()
   does not break out the loop and continues
   because the key referenced in the path
   at path->nodes[0] and path->slots[0] is
   for inode 257, its type is < BTRFS_EXTENT_DATA_KEY
   and its offset (500) is less then our delalloc
   range's end (8192)

   the item pointed by the path, an inode reference item,
   is (incorrectly) interpreted as a file extent item and
   we get an invalid extent type, leading to the BUG_ON(1):

   if (extent_type == BTRFS_FILE_EXTENT_REG ||
      extent_type == BTRFS_FILE_EXTENT_PREALLOC) {
       (...)
   } else if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
       (...)
   } else {
       BUG_ON(1)
   }

The same can happen if a xattr is added concurrently and ends up having
a key with an offset smaller then the delalloc's range end.

So fix this by skipping keys with a type smaller than
BTRFS_EXTENT_DATA_KEY.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/inode.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -1286,8 +1286,14 @@ next_slot:
 		num_bytes = 0;
 		btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
 
-		if (found_key.objectid > ino ||
-		    found_key.type > BTRFS_EXTENT_DATA_KEY ||
+		if (found_key.objectid > ino)
+			break;
+		if (WARN_ON_ONCE(found_key.objectid < ino) ||
+		    found_key.type < BTRFS_EXTENT_DATA_KEY) {
+			path->slots[0]++;
+			goto next_slot;
+		}
+		if (found_key.type > BTRFS_EXTENT_DATA_KEY ||
 		    found_key.offset > end)
 			break;
 

[PATCH 3.10 14/35] ext4, jbd2: ensure entering into panic after recording an error in superblock

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daeho Jeong <daeho.jeong@samsung.com>

commit 4327ba52afd03fc4b5afa0ee1d774c9c5b0e85c5 upstream.

If a EXT4 filesystem utilizes JBD2 journaling and an error occurs, the
journaling will be aborted first and the error number will be recorded
into JBD2 superblock and, finally, the system will enter into the
panic state in "errors=panic" option.  But, in the rare case, this
sequence is little twisted like the below figure and it will happen
that the system enters into panic state, which means the system reset
in mobile environment, before completion of recording an error in the
journal superblock. In this case, e2fsck cannot recognize that the
filesystem failure occurred in the previous run and the corruption
wouldn't be fixed.

Task A                        Task B
ext4_handle_error()
-> jbd2_journal_abort()
  -> __journal_abort_soft()
    -> __jbd2_journal_abort_hard()
    | -> journal->j_flags |= JBD2_ABORT;
    |
    |                         __ext4_abort()
    |                         -> jbd2_journal_abort()
    |                         | -> __journal_abort_soft()
    |                         |   -> if (journal->j_flags & JBD2_ABORT)
    |                         |           return;
    |                         -> panic()
    |
    -> jbd2_journal_update_sb_errno()

Tested-by: Hobin Woo <hobin.woo@samsung.com>
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/super.c      |   12 ++++++++++--
 fs/jbd2/journal.c    |    6 +++++-
 include/linux/jbd2.h |    1 +
 3 files changed, 16 insertions(+), 3 deletions(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -400,9 +400,13 @@ static void ext4_handle_error(struct sup
 		ext4_msg(sb, KERN_CRIT, "Remounting filesystem read-only");
 		sb->s_flags |= MS_RDONLY;
 	}
-	if (test_opt(sb, ERRORS_PANIC))
+	if (test_opt(sb, ERRORS_PANIC)) {
+		if (EXT4_SB(sb)->s_journal &&
+		  !(EXT4_SB(sb)->s_journal->j_flags & JBD2_REC_ERR))
+			return;
 		panic("EXT4-fs (device %s): panic forced after error\n",
 			sb->s_id);
+	}
 }
 
 void __ext4_error(struct super_block *sb, const char *function,
@@ -576,8 +580,12 @@ void __ext4_abort(struct super_block *sb
 			jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO);
 		save_error_info(sb, function, line);
 	}
-	if (test_opt(sb, ERRORS_PANIC))
+	if (test_opt(sb, ERRORS_PANIC)) {
+		if (EXT4_SB(sb)->s_journal &&
+		  !(EXT4_SB(sb)->s_journal->j_flags & JBD2_REC_ERR))
+			return;
 		panic("EXT4-fs panic from previous error\n");
+	}
 }
 
 void ext4_msg(struct super_block *sb, const char *prefix, const char *fmt, ...)
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -2049,8 +2049,12 @@ static void __journal_abort_soft (journa
 
 	__jbd2_journal_abort_hard(journal);
 
-	if (errno)
+	if (errno) {
 		jbd2_journal_update_sb_errno(journal);
+		write_lock(&journal->j_state_lock);
+		journal->j_flags |= JBD2_REC_ERR;
+		write_unlock(&journal->j_state_lock);
+	}
 }
 
 /**
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -977,6 +977,7 @@ struct journal_s
 #define JBD2_ABORT_ON_SYNCDATA_ERR	0x040	/* Abort the journal on file
 						 * data write error in ordered
 						 * mode */
+#define JBD2_REC_ERR	0x080	/* The errno in the sb has been recorded */
 
 /*
  * Function declarations for the journaling transaction and buffer

[PATCH 3.10 15/35] firewire: ohci: fix JMicron JMB38x IT context discovery

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Richter <stefanr@s5r6.in-berlin.de>

commit 100ceb66d5c40cc0c7018e06a9474302470be73c upstream.

Reported by Clifford and Craig for JMicron OHCI-1394 + SDHCI combo
controllers:  Often or even most of the time, the controller is
initialized with the message "added OHCI v1.10 device as card 0, 4 IR +
0 IT contexts, quirks 0x10".  With 0 isochronous transmit DMA contexts
(IT contexts), applications like audio output are impossible.

However, OHCI-1394 demands that at least 4 IT contexts are implemented
by the link layer controller, and indeed JMicron JMB38x do implement
four of them.  Only their IsoXmitIntMask register is unreliable at early
access.

With my own JMB381 single function controller I found:
  - I can reproduce the problem with a lower probability than Craig's.
  - If I put a loop around the section which clears and reads
    IsoXmitIntMask, then either the first or the second attempt will
    return the correct initial mask of 0x0000000f.  I never encountered
    a case of needing more than a second attempt.
  - Consequently, if I put a dummy reg_read(...IsoXmitIntMaskSet)
    before the first write, the subsequent read will return the correct
    result.
  - If I merely ignore a wrong read result and force the known real
    result, later isochronous transmit DMA usage works just fine.

So let's just fix this chip bug up by the latter method.  Tested with
JMB381 on kernel 3.13 and 4.3.

Since OHCI-1394 generally requires 4 IT contexts at a minium, this
workaround is simply applied whenever the initial read of IsoXmitIntMask
returns 0, regardless whether it's a JMicron chip or not.  I never heard
of this issue together with any other chip though.

I am not 100% sure that this fix works on the OHCI-1394 part of JMB380
and JMB388 combo controllers exactly the same as on the JMB381 single-
function controller, but so far I haven't had a chance to let an owner
of a combo chip run a patched kernel.

Strangely enough, IsoRecvIntMask is always reported correctly, even
though it is probed right before IsoXmitIntMask.

Reported-by: Clifford Dunn
Reported-by: Craig Moore <craig.moore@qenos.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/firewire/ohci.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -3670,6 +3670,11 @@ static int pci_probe(struct pci_dev *dev
 
 	reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, ~0);
 	ohci->it_context_support = reg_read(ohci, OHCI1394_IsoXmitIntMaskSet);
+	/* JMicron JMB38x often shows 0 at first read, just ignore it */
+	if (!ohci->it_context_support) {
+		ohci_notice(ohci, "overriding IsoXmitIntMask\n");
+		ohci->it_context_support = 0xf;
+	}
 	reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, ~0);
 	ohci->it_context_mask = ohci->it_context_support;
 	ohci->n_it = hweight32(ohci->it_context_mask);

[PATCH 3.10 16/35] nfs4: start callback_ident at idr 1

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Coddington <bcodding@redhat.com>

commit c68a027c05709330fe5b2f50c50d5fa02124b5d8 upstream.

If clp->cl_cb_ident is zero, then nfs_cb_idr_remove_locked() skips removing
it when the nfs_client is freed.  A decoding or server bug can then find
and try to put that first nfs_client which would lead to a crash.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: d6870312659d ("nfs4client: convert to idr_alloc()")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4client.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -32,7 +32,7 @@ static int nfs_get_cb_ident_idr(struct n
 		return ret;
 	idr_preload(GFP_KERNEL);
 	spin_lock(&nn->nfs_client_lock);
-	ret = idr_alloc(&nn->cb_ident_idr, clp, 0, 0, GFP_NOWAIT);
+	ret = idr_alloc(&nn->cb_ident_idr, clp, 1, 0, GFP_NOWAIT);
 	if (ret >= 0)
 		clp->cl_cb_ident = ret;
 	spin_unlock(&nn->nfs_client_lock);

[PATCH 3.10 17/35] nfs: if we have no valid attrs, then dont declare the attribute cache valid

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Layton <jlayton@poochiereds.net>

commit c812012f9ca7cf89c9e1a1cd512e6c3b5be04b85 upstream.

If we pass in an empty nfs_fattr struct to nfs_update_inode, it will
(correctly) not update any of the attributes, but it then clears the
NFS_INO_INVALID_ATTR flag, which indicates that the attributes are
up to date. Don't clear the flag if the fattr struct has no valid
attrs to apply.

Reviewed-by: Steve French <steve.french@primarydata.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/inode.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -1503,7 +1503,11 @@ static int nfs_update_inode(struct inode
 			nfsi->attrtimeo_timestamp = now;
 		}
 	}
-	invalid &= ~NFS_INO_INVALID_ATTR;
+
+	/* Don't declare attrcache up to date if there were no attrs! */
+	if (fattr->valid != 0)
+		invalid &= ~NFS_INO_INVALID_ATTR;
+
 	/* Don't invalidate the data if we were to blame */
 	if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode)
 				|| S_ISLNK(inode->i_mode)))

[PATCH 3.10 18/35] USB: cdc_acm: Ignore Infineon Flash Loader utility

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jonas Jonsson <jonas@ludd.ltu.se>

commit f33a7f72e5fc033daccbb8d4753d7c5c41a4d67b upstream.

Some modems, such as the Telit UE910, are using an Infineon Flash Loader
utility. It has two interfaces, 2/2/0 (Abstract Modem) and 10/0/0 (CDC
Data). The latter can be used as a serial interface to upgrade the
firmware of the modem. However, that isn't possible when the cdc-acm
driver takes control of the device.

The following is an explanation of the behaviour by Daniele Palmas during
discussion on linux-usb.

"This is what happens when the device is turned on (without modifying
the drivers):

[155492.352031] usb 1-3: new high-speed USB device number 27 using ehci-pci
[155492.485429] usb 1-3: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11
[155492.485436] usb 1-3: New USB device found, idVendor=058b, idProduct=0041
[155492.485439] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[155492.485952] cdc_acm 1-3:1.0: ttyACM0: USB ACM device

This is the flashing device that is caught by the cdc-acm driver. Once
the ttyACM appears, the application starts sending a magic string
(simple write on the file descriptor) to keep the device in flashing
mode. If this magic string is not properly received in a certain time
interval, the modem goes on in normal operative mode:

[155493.748094] usb 1-3: USB disconnect, device number 27
[155494.916025] usb 1-3: new high-speed USB device number 28 using ehci-pci
[155495.059978] usb 1-3: New USB device found, idVendor=1bc7, idProduct=0021
[155495.059983] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[155495.059986] usb 1-3: Product: 6 CDC-ACM + 1 CDC-ECM
[155495.059989] usb 1-3: Manufacturer: Telit
[155495.059992] usb 1-3: SerialNumber: 359658044004697
[155495.138958] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[155495.140832] cdc_acm 1-3:1.2: ttyACM1: USB ACM device
[155495.142827] cdc_acm 1-3:1.4: ttyACM2: USB ACM device
[155495.144462] cdc_acm 1-3:1.6: ttyACM3: USB ACM device
[155495.145967] cdc_acm 1-3:1.8: ttyACM4: USB ACM device
[155495.147588] cdc_acm 1-3:1.10: ttyACM5: USB ACM device
[155495.154322] cdc_ether 1-3:1.12 wwan0: register 'cdc_ether' at usb-0000:00:1a.7-3, Mobile Broadband Network Device, 00:00:11:12:13:14

Using the cdc-acm driver, the string, though being sent in the same way
than using the usb-serial-simple driver (I can confirm that the data is
passing properly since I used an hw usb sniffer), does not make the
device to stay in flashing mode."

Signed-off-by: Jonas Jonsson <jonas@ludd.ltu.se>
Tested-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-acm.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1726,6 +1726,11 @@ static const struct usb_device_id acm_id
 	},
 #endif
 
+	/* Exclude Infineon Flash Loader utility */
+	{ USB_DEVICE(0x058b, 0x0041),
+	.driver_info = IGNORE_DEVICE,
+	},
+
 	/* control interfaces without any protocol set */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_PROTO_NONE) },

[PATCH 3.10 19/35] USB: cp210x: Remove CP2110 ID from compatibility list

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>

commit 7c90e610b60cd1ed6abafd806acfaedccbbe52d1 upstream.

CP2110 ID (0x10c4, 0xea80) doesn't belong here because it's a HID
and completely different from CP210x devices.

Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/cp210x.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -132,7 +132,6 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
-	{ USB_DEVICE(0x10C4, 0xEA80) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
 	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
 	{ USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */

[PATCH 3.10 20/35] USB: add quirk for devices with broken LPM

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit ad87e03213b552a5c33d5e1e7a19a73768397010 upstream.

Some USB device / host controller combinations seem to have problems
with Link Power Management.  For example, Steinar found that his xHCI
controller wouldn't handle bandwidth calculations correctly for two
video cards simultaneously when LPM was enabled, even though the bus
had plenty of bandwidth available.

This patch introduces a new quirk flag for devices that should remain
disabled for LPM, and creates quirk entries for Steinar's devices.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Steinar H. Gunderson <sgunderson@bigfoot.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c     |    7 ++++++-
 drivers/usb/core/quirks.c  |    6 ++++++
 include/linux/usb/quirks.h |    3 +++
 3 files changed, 15 insertions(+), 1 deletion(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -137,6 +137,10 @@ struct usb_hub *usb_hub_to_struct_hub(st
 
 static int usb_device_supports_lpm(struct usb_device *udev)
 {
+	/* Some devices have trouble with LPM */
+	if (udev->quirks & USB_QUIRK_NO_LPM)
+		return 0;
+
 	/* USB 2.1 (and greater) devices indicate LPM support through
 	 * their USB 2.0 Extended Capabilities BOS descriptor.
 	 */
@@ -4289,6 +4293,8 @@ hub_port_init (struct usb_hub *hub, stru
 		goto fail;
 	}
 
+	usb_detect_quirks(udev);
+
 	if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
 		retval = usb_get_bos_descriptor(udev);
 		if (!retval) {
@@ -4530,7 +4536,6 @@ static void hub_port_connect_change(stru
 		if (status < 0)
 			goto loop;
 
-		usb_detect_quirks(udev);
 		if (udev->quirks & USB_QUIRK_DELAY_INIT)
 			msleep(1000);
 
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -182,6 +182,12 @@ static const struct usb_device_id usb_in
 	{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
 			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
 
+	/* Blackmagic Design Intensity Shuttle */
+	{ USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* Blackmagic Design UltraStudio SDI */
+	{ USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM },
+
 	{ }  /* terminating entry must be last */
 };
 
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -33,4 +33,7 @@
 /* device generates spurious wakeup, ignore remote wakeup capability */
 #define USB_QUIRK_IGNORE_REMOTE_WAKEUP	0x00000200
 
+/* device can't handle Link Power Management */
+#define USB_QUIRK_NO_LPM			BIT(10)
+
 #endif /* __LINUX_USB_QUIRKS_H */

[PATCH 3.10 21/35] USB: whci-hcd: add check for dma mapping error

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

commit f9fa1887dcf26bd346665a6ae3d3f53dec54cba1 upstream.

qset_fill_page_list() do not check for dma mapping errors.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/whci/qset.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -377,6 +377,10 @@ static int qset_fill_page_list(struct wh
 	if (std->pl_virt == NULL)
 		return -ENOMEM;
 	std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, pl_len, DMA_TO_DEVICE);
+	if (dma_mapping_error(whc->wusbhc.dev, std->dma_addr)) {
+		kfree(std->pl_virt);
+		return -EFAULT;
+	}
 
 	for (p = 0; p < std->num_pointers; p++) {
 		std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr);

[PATCH 3.10 22/35] usb: Use the USB_SS_MULT() macro to decode burst multiplier for log message

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

commit 5377adb092664d336ac212499961cac5e8728794 upstream.

usb_parse_ss_endpoint_companion() now decodes the burst multiplier
correctly in order to check that it's <= 3, but still uses the wrong
expression if warning that it's > 3.

Fixes: ff30cbc8da42 ("usb: Use the USB_SS_MULT() macro to get the ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/config.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -117,7 +117,8 @@ static void usb_parse_ss_endpoint_compan
 		   USB_SS_MULT(desc->bmAttributes) > 3) {
 		dev_warn(ddev, "Isoc endpoint has Mult of %d in "
 				"config %d interface %d altsetting %d ep %d: "
-				"setting to 3\n", desc->bmAttributes + 1,
+				"setting to 3\n",
+				USB_SS_MULT(desc->bmAttributes),
 				cfgno, inum, asnum, ep->desc.bEndpointAddress);
 		ep->ss_ep_comp.bmAttributes = 2;
 	}

[PATCH 3.10 23/35] gre6: allow to update all parameters via rtnl

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Dichtel <nicolas.dichtel@6wind.com>

[ Upstream commit 6a61d4dbf4f54b5683e0f1e58d873cecca7cb977 ]

Parameters were updated only if the kernel was unable to find the tunnel
with the new parameters, ie only if core pamareters were updated (keys,
addr, link, type).
Now it's possible to update ttl, hoplimit, flowinfo and flags.

Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_gre.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -1541,13 +1541,11 @@ static int ip6gre_changelink(struct net_
 			return -EEXIST;
 	} else {
 		t = nt;
-
-		ip6gre_tunnel_unlink(ign, t);
-		ip6gre_tnl_change(t, &p, !tb[IFLA_MTU]);
-		ip6gre_tunnel_link(ign, t);
-		netdev_state_change(dev);
 	}
 
+	ip6gre_tunnel_unlink(ign, t);
+	ip6gre_tnl_change(t, &p, !tb[IFLA_MTU]);
+	ip6gre_tunnel_link(ign, t);
 	return 0;
 }
 

[PATCH 3.10 24/35] atl1c: Improve driver not to do order 4 GFP_ATOMIC allocation

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Machek <pavel@ucw.cz>

[ Upstream commit f2a3771ae8aca879c32336c76ad05a017629bae2 ]

atl1c driver is doing order-4 allocation with GFP_ATOMIC
priority. That often breaks  networking after resume. Switch to
GFP_KERNEL. Still not ideal, but should be significantly better.

atl1c_setup_ring_resources() is called from .open() function, and
already uses GFP_KERNEL, so this change is safe.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/atheros/atl1c/atl1c_main.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -1016,13 +1016,12 @@ static int atl1c_setup_ring_resources(st
 		sizeof(struct atl1c_recv_ret_status) * rx_desc_count +
 		8 * 4;
 
-	ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
-				&ring_header->dma);
+	ring_header->desc = dma_zalloc_coherent(&pdev->dev, ring_header->size,
+						&ring_header->dma, GFP_KERNEL);
 	if (unlikely(!ring_header->desc)) {
-		dev_err(&pdev->dev, "pci_alloc_consistend failed\n");
+		dev_err(&pdev->dev, "could not get memory for DMA buffer\n");
 		goto err_nomem;
 	}
-	memset(ring_header->desc, 0, ring_header->size);
 	/* init TPD ring */
 
 	tpd_ring[0].dma = roundup(ring_header->dma, 8);

[PATCH 3.10 25/35] sctp: update the netstamp_needed counter when copying sockets

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>

[ Upstream commit 01ce63c90170283a9855d1db4fe81934dddce648 ]

Dmitry Vyukov reported that SCTP was triggering a WARN on socket destroy
related to disabling sock timestamp.

When SCTP accepts an association or peel one off, it copies sock flags
but forgot to call net_enable_timestamp() if a packet timestamping flag
was copied, leading to extra calls to net_disable_timestamp() whenever
such clones were closed.

The fix is to call net_enable_timestamp() whenever we copy a sock with
that flag on, like tcp does.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/sock.h |    2 ++
 net/core/sock.c    |    2 --
 net/sctp/socket.c  |    3 +++
 3 files changed, 5 insertions(+), 2 deletions(-)

--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -672,6 +672,8 @@ enum sock_flags {
 	SOCK_SELECT_ERR_QUEUE, /* Wake select on error queue */
 };
 
+#define SK_FLAGS_TIMESTAMP ((1UL << SOCK_TIMESTAMP) | (1UL << SOCK_TIMESTAMPING_RX_SOFTWARE))
+
 static inline void sock_copy_flags(struct sock *nsk, struct sock *osk)
 {
 	nsk->sk_flags = osk->sk_flags;
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -419,8 +419,6 @@ static void sock_warn_obsolete_bsdism(co
 	}
 }
 
-#define SK_FLAGS_TIMESTAMP ((1UL << SOCK_TIMESTAMP) | (1UL << SOCK_TIMESTAMPING_RX_SOFTWARE))
-
 static void sock_disable_timestamp(struct sock *sk, unsigned long flags)
 {
 	if (sk->sk_flags & flags) {
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -6969,6 +6969,9 @@ void sctp_copy_sock(struct sock *newsk,
 	newinet->mc_ttl = 1;
 	newinet->mc_index = 0;
 	newinet->mc_list = NULL;
+
+	if (newsk->sk_flags & SK_FLAGS_TIMESTAMP)
+		net_enable_timestamp();
 }
 
 static inline void sctp_copy_descendant(struct sock *sk_to,

[PATCH 3.10 26/35] ipv6: sctp: clone options to avoid use after free

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 9470e24f35ab81574da54e69df90c1eb4a96b43f ]

SCTP is lacking proper np->opt cloning at accept() time.

TCP and DCCP use ipv6_dup_options() helper, do the same
in SCTP.

We might later factorize this code in a common helper to avoid
future mistakes.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/ipv6.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -639,6 +639,7 @@ static struct sock *sctp_v6_create_accep
 	struct sock *newsk;
 	struct ipv6_pinfo *newnp, *np = inet6_sk(sk);
 	struct sctp6_sock *newsctp6sk;
+	struct ipv6_txoptions *opt;
 
 	newsk = sk_alloc(sock_net(sk), PF_INET6, GFP_KERNEL, sk->sk_prot);
 	if (!newsk)
@@ -658,6 +659,13 @@ static struct sock *sctp_v6_create_accep
 
 	memcpy(newnp, np, sizeof(struct ipv6_pinfo));
 
+	rcu_read_lock();
+	opt = rcu_dereference(np->opt);
+	if (opt)
+		opt = ipv6_dup_options(newsk, opt);
+	RCU_INIT_POINTER(newnp->opt, opt);
+	rcu_read_unlock();
+
 	/* Initialize sk's sport, dport, rcv_saddr and daddr for getsockname()
 	 * and getpeername().
 	 */

[PATCH 3.10 28/35] sh_eth: fix kernel oops in skb_put()

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

[ Upstream commit 248be83dcb3feb3f6332eb3d010a016402138484 ]

In a low memory situation the following kernel oops occurs:

Unable to handle kernel NULL pointer dereference at virtual address 00000050
pgd = 8490c000
[00000050] *pgd=4651e831, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1] PREEMPT ARM
Modules linked in:
CPU: 0    Not tainted  (3.4-at16 #9)
PC is at skb_put+0x10/0x98
LR is at sh_eth_poll+0x2c8/0xa10
pc : [<8035f780>]    lr : [<8028bf50>]    psr: 60000113
sp : 84eb1a90  ip : 84eb1ac8  fp : 84eb1ac4
r10: 0000003f  r9 : 000005ea  r8 : 00000000
r7 : 00000000  r6 : 940453b0  r5 : 00030000  r4 : 9381b180
r3 : 00000000  r2 : 00000000  r1 : 000005ea  r0 : 00000000
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c53c7d  Table: 4248c059  DAC: 00000015
Process klogd (pid: 2046, stack limit = 0x84eb02e8)
[...]

This is  because netdev_alloc_skb() fails and 'mdp->rx_skbuff[entry]' is left
NULL but sh_eth_rx() later  uses it without checking.  Add such check...

Reported-by: Yasushi SHOJI <yashi@atmark-techno.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/renesas/sh_eth.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1421,6 +1421,7 @@ static int sh_eth_rx(struct net_device *
 		desc_status >>= 16;
 #endif
 
+		skb = mdp->rx_skbuff[entry];
 		if (desc_status & (RD_RFS1 | RD_RFS2 | RD_RFS3 | RD_RFS4 |
 				   RD_RFS5 | RD_RFS6 | RD_RFS10)) {
 			ndev->stats.rx_errors++;
@@ -1436,12 +1437,11 @@ static int sh_eth_rx(struct net_device *
 				ndev->stats.rx_missed_errors++;
 			if (desc_status & RD_RFS10)
 				ndev->stats.rx_over_errors++;
-		} else {
+		} else	if (skb) {
 			if (!mdp->cd->hw_swap)
 				sh_eth_soft_swap(
 					phys_to_virt(ALIGN(rxdesc->addr, 4)),
 					pkt_len + 2);
-			skb = mdp->rx_skbuff[entry];
 			mdp->rx_skbuff[entry] = NULL;
 			if (mdp->cd->rpadir)
 				skb_reserve(skb, NET_IP_ALIGN);

[PATCH 3.10 29/35] pptp: verify sockaddr_len in pptp_bind() and pptp_connect()

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: WANG Cong <xiyou.wangcong@gmail.com>

[ Upstream commit 09ccfd238e5a0e670d8178cf50180ea81ae09ae1 ]

Reported-by: Dmitry Vyukov <dvyukov@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ppp/pptp.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/net/ppp/pptp.c
+++ b/drivers/net/ppp/pptp.c
@@ -420,6 +420,9 @@ static int pptp_bind(struct socket *sock
 	struct pptp_opt *opt = &po->proto.pptp;
 	int error = 0;
 
+	if (sockaddr_len < sizeof(struct sockaddr_pppox))
+		return -EINVAL;
+
 	lock_sock(sk);
 
 	opt->src_addr = sp->sa_addr.pptp;
@@ -441,6 +444,9 @@ static int pptp_connect(struct socket *s
 	struct flowi4 fl4;
 	int error = 0;
 
+	if (sockaddr_len < sizeof(struct sockaddr_pppox))
+		return -EINVAL;
+
 	if (sp->sa_protocol != PX_PROTO_PPTP)
 		return -EINVAL;
 

[PATCH 3.10 30/35] bluetooth: Validate socket address length in sco_sock_bind().

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "David S. Miller" <davem@davemloft.net>

[ Upstream commit 5233252fce714053f0151680933571a2da9cbfb4 ]

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bluetooth/sco.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -456,6 +456,9 @@ static int sco_sock_bind(struct socket *
 	if (!addr || addr->sa_family != AF_BLUETOOTH)
 		return -EINVAL;
 
+	if (addr_len < sizeof(struct sockaddr_sco))
+		return -EINVAL;
+
 	lock_sock(sk);
 
 	if (sk->sk_state != BT_OPEN) {

[PATCH 3.10 31/35] af_unix: Revert lock_interruptible in stream receive code

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rainer Weikusat <rweikusat@mobileactivedefense.com>

[ Upstream commit 3822b5c2fc62e3de8a0f33806ff279fb7df92432 ]

With b3ca9b02b00704053a38bfe4c31dbbb9c13595d0, the AF_UNIX SOCK_STREAM
receive code was changed from using mutex_lock(&u->readlock) to
mutex_lock_interruptible(&u->readlock) to prevent signals from being
delayed for an indefinite time if a thread sleeping on the mutex
happened to be selected for handling the signal. But this was never a
problem with the stream receive code (as opposed to its datagram
counterpart) as that never went to sleep waiting for new messages with the
mutex held and thus, wouldn't cause secondary readers to block on the
mutex waiting for the sleeping primary reader. As the interruptible
locking makes the code more complicated in exchange for no benefit,
change it back to using mutex_lock.

Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/unix/af_unix.c |   13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1934,14 +1934,7 @@ static int unix_dgram_recvmsg(struct kio
 	if (flags&MSG_OOB)
 		goto out;
 
-	err = mutex_lock_interruptible(&u->readlock);
-	if (unlikely(err)) {
-		/* recvmsg() in non blocking mode is supposed to return -EAGAIN
-		 * sk_rcvtimeo is not honored by mutex_lock_interruptible()
-		 */
-		err = noblock ? -EAGAIN : -ERESTARTSYS;
-		goto out;
-	}
+	mutex_lock(&u->readlock);
 
 	skip = sk_peek_offset(sk, flags);
 
@@ -2133,12 +2126,12 @@ again:
 
 			timeo = unix_stream_data_wait(sk, timeo, last);
 
-			if (signal_pending(current)
-			    ||  mutex_lock_interruptible(&u->readlock)) {
+			if (signal_pending(current)) {
 				err = sock_intr_errno(timeo);
 				goto out;
 			}
 
+			mutex_lock(&u->readlock);
 			continue;
  unlock:
 			unix_state_unlock(sk);

[PATCH 3.10 32/35] KEYS: Fix race between key destruction and finding a keyring by name

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Howells <dhowells@redhat.com>

commit 94c4554ba07adbdde396748ee7ae01e86cf2d8d7 upstream.

There appears to be a race between:

 (1) key_gc_unused_keys() which frees key->security and then calls
     keyring_destroy() to unlink the name from the name list

 (2) find_keyring_by_name() which calls key_permission(), thus accessing
     key->security, on a key before checking to see whether the key usage is 0
     (ie. the key is dead and might be cleaned up).

Fix this by calling ->destroy() before cleaning up the core key data -
including key->security.

Reported-by: Petr Matousek <pmatouse@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/keys/gc.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/security/keys/gc.c
+++ b/security/keys/gc.c
@@ -187,6 +187,10 @@ static noinline void key_gc_unused_keys(
 		kdebug("- %u", key->serial);
 		key_check(key);
 
+		/* Throw away the key data */
+		if (key->type->destroy)
+			key->type->destroy(key);
+
 		security_key_free(key);
 
 		/* deal with the user's key tracking and quota */
@@ -201,10 +205,6 @@ static noinline void key_gc_unused_keys(
 		if (test_bit(KEY_FLAG_INSTANTIATED, &key->flags))
 			atomic_dec(&key->user->nikeys);
 
-		/* now throw away the key memory */
-		if (key->type->destroy)
-			key->type->destroy(key);
-
 		key_user_put(key->user);
 
 		kfree(key->description);

[PATCH 3.10 33/35] KEYS: Fix crash when attempt to garbage collect an uninstantiated keyring

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Howells <dhowells@redhat.com>

commit f05819df10d7b09f6d1eb6f8534a8f68e5a4fe61 upstream.

The following sequence of commands:

    i=`keyctl add user a a @s`
    keyctl request2 keyring foo bar @t
    keyctl unlink $i @s

tries to invoke an upcall to instantiate a keyring if one doesn't already
exist by that name within the user's keyring set.  However, if the upcall
fails, the code sets keyring->type_data.reject_error to -ENOKEY or some
other error code.  When the key is garbage collected, the key destroy
function is called unconditionally and keyring_destroy() uses list_empty()
on keyring->type_data.link - which is in a union with reject_error.
Subsequently, the kernel tries to unlink the keyring from the keyring names
list - which oopses like this:

	BUG: unable to handle kernel paging request at 00000000ffffff8a
	IP: [<ffffffff8126e051>] keyring_destroy+0x3d/0x88
	...
	Workqueue: events key_garbage_collector
	...
	RIP: 0010:[<ffffffff8126e051>] keyring_destroy+0x3d/0x88
	RSP: 0018:ffff88003e2f3d30  EFLAGS: 00010203
	RAX: 00000000ffffff82 RBX: ffff88003bf1a900 RCX: 0000000000000000
	RDX: 0000000000000000 RSI: 000000003bfc6901 RDI: ffffffff81a73a40
	RBP: ffff88003e2f3d38 R08: 0000000000000152 R09: 0000000000000000
	R10: ffff88003e2f3c18 R11: 000000000000865b R12: ffff88003bf1a900
	R13: 0000000000000000 R14: ffff88003bf1a908 R15: ffff88003e2f4000
	...
	CR2: 00000000ffffff8a CR3: 000000003e3ec000 CR4: 00000000000006f0
	...
	Call Trace:
	 [<ffffffff8126c756>] key_gc_unused_keys.constprop.1+0x5d/0x10f
	 [<ffffffff8126ca71>] key_garbage_collector+0x1fa/0x351
	 [<ffffffff8105ec9b>] process_one_work+0x28e/0x547
	 [<ffffffff8105fd17>] worker_thread+0x26e/0x361
	 [<ffffffff8105faa9>] ? rescuer_thread+0x2a8/0x2a8
	 [<ffffffff810648ad>] kthread+0xf3/0xfb
	 [<ffffffff810647ba>] ? kthread_create_on_node+0x1c2/0x1c2
	 [<ffffffff815f2ccf>] ret_from_fork+0x3f/0x70
	 [<ffffffff810647ba>] ? kthread_create_on_node+0x1c2/0x1c2

Note the value in RAX.  This is a 32-bit representation of -ENOKEY.

The solution is to only call ->destroy() if the key was successfully
instantiated.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/keys/gc.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/security/keys/gc.c
+++ b/security/keys/gc.c
@@ -187,8 +187,10 @@ static noinline void key_gc_unused_keys(
 		kdebug("- %u", key->serial);
 		key_check(key);
 
-		/* Throw away the key data */
-		if (key->type->destroy)
+		/* Throw away the key data if the key is instantiated */
+		if (test_bit(KEY_FLAG_INSTANTIATED, &key->flags) &&
+		    !test_bit(KEY_FLAG_NEGATIVE, &key->flags) &&
+		    key->type->destroy)
 			key->type->destroy(key);
 
 		security_key_free(key);

[PATCH 3.10 34/35] KEYS: Fix race between read and revoke

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Howells <dhowells@redhat.com>

commit b4a1b4f5047e4f54e194681125c74c0aa64d637d upstream.

This fixes CVE-2015-7550.

There's a race between keyctl_read() and keyctl_revoke().  If the revoke
happens between keyctl_read() checking the validity of a key and the key's
semaphore being taken, then the key type read method will see a revoked key.

This causes a problem for the user-defined key type because it assumes in
its read method that there will always be a payload in a non-revoked key
and doesn't check for a NULL pointer.

Fix this by making keyctl_read() check the validity of a key after taking
semaphore instead of before.

I think the bug was introduced with the original keyrings code.

This was discovered by a multithreaded test program generated by syzkaller
(http://github.com/google/syzkaller).  Here's a cleaned up version:

	#include <sys/types.h>
	#include <keyutils.h>
	#include <pthread.h>
	void *thr0(void *arg)
	{
		key_serial_t key = (unsigned long)arg;
		keyctl_revoke(key);
		return 0;
	}
	void *thr1(void *arg)
	{
		key_serial_t key = (unsigned long)arg;
		char buffer[16];
		keyctl_read(key, buffer, 16);
		return 0;
	}
	int main()
	{
		key_serial_t key = add_key("user", "%", "foo", 3, KEY_SPEC_USER_KEYRING);
		pthread_t th[5];
		pthread_create(&th[0], 0, thr0, (void *)(unsigned long)key);
		pthread_create(&th[1], 0, thr1, (void *)(unsigned long)key);
		pthread_create(&th[2], 0, thr0, (void *)(unsigned long)key);
		pthread_create(&th[3], 0, thr1, (void *)(unsigned long)key);
		pthread_join(th[0], 0);
		pthread_join(th[1], 0);
		pthread_join(th[2], 0);
		pthread_join(th[3], 0);
		return 0;
	}

Build as:

	cc -o keyctl-race keyctl-race.c -lkeyutils -lpthread

Run as:

	while keyctl-race; do :; done

as it may need several iterations to crash the kernel.  The crash can be
summarised as:

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
	IP: [<ffffffff81279b08>] user_read+0x56/0xa3
	...
	Call Trace:
	 [<ffffffff81276aa9>] keyctl_read_key+0xb6/0xd7
	 [<ffffffff81277815>] SyS_keyctl+0x83/0xe0
	 [<ffffffff815dbb97>] entry_SYSCALL_64_fastpath+0x12/0x6f

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/keys/keyctl.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -744,16 +744,16 @@ long keyctl_read_key(key_serial_t keyid,
 
 	/* the key is probably readable - now try to read it */
 can_read_key:
-	ret = key_validate(key);
-	if (ret == 0) {
-		ret = -EOPNOTSUPP;
-		if (key->type->read) {
-			/* read the data with the semaphore held (since we
-			 * might sleep) */
-			down_read(&key->sem);
+	ret = -EOPNOTSUPP;
+	if (key->type->read) {
+		/* Read the data with the semaphore held (since we might sleep)
+		 * to protect against the key being updated or revoked.
+		 */
+		down_read(&key->sem);
+		ret = key_validate(key);
+		if (ret == 0)
 			ret = key->type->read(key, buffer, buflen);
-			up_read(&key->sem);
-		}
+		up_read(&key->sem);
 	}
 
 error2:

[PATCH 3.10 35/35] KEYS: Fix keyring ref leak in join_session_keyring()

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yevgeny Pats <yevgeny@perception-point.io>

commit 23567fd052a9abb6d67fe8e7a9ccdd9800a540f2 upstream.

This fixes CVE-2016-0728.

If a thread is asked to join as a session keyring the keyring that's already
set as its session, we leak a keyring reference.

This can be tested with the following program:

	#include <stddef.h>
	#include <stdio.h>
	#include <sys/types.h>
	#include <keyutils.h>

	int main(int argc, const char *argv[])
	{
		int i = 0;
		key_serial_t serial;

		serial = keyctl(KEYCTL_JOIN_SESSION_KEYRING,
				"leaked-keyring");
		if (serial < 0) {
			perror("keyctl");
			return -1;
		}

		if (keyctl(KEYCTL_SETPERM, serial,
			   KEY_POS_ALL | KEY_USR_ALL) < 0) {
			perror("keyctl");
			return -1;
		}

		for (i = 0; i < 100; i++) {
			serial = keyctl(KEYCTL_JOIN_SESSION_KEYRING,
					"leaked-keyring");
			if (serial < 0) {
				perror("keyctl");
				return -1;
			}
		}

		return 0;
	}

If, after the program has run, there something like the following line in
/proc/keys:

3f3d898f I--Q---   100 perm 3f3f0000     0     0 keyring   leaked-keyring: empty

with a usage count of 100 * the number of times the program has been run,
then the kernel is malfunctioning.  If leaked-keyring has zero usages or
has been garbage collected, then the problem is fixed.

Reported-by: Yevgeny Pats <yevgeny@perception-point.io>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/keys/process_keys.c |    1 +
 1 file changed, 1 insertion(+)

--- a/security/keys/process_keys.c
+++ b/security/keys/process_keys.c
@@ -792,6 +792,7 @@ long join_session_keyring(const char *na
 		ret = PTR_ERR(keyring);
 		goto error2;
 	} else if (keyring == new->session_keyring) {
+		key_put(keyring);
 		ret = 0;
 		goto error2;
 	}

Re: [PATCH 3.10 00/35] 3.10.95-stable review

[Shuah Khan]

On 01/20/2016 03:00 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.10.95 release.
> There are 35 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri Jan 22 21:19:15 UTC 2016.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.10.95-rc1.gz
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah


-- 
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
shuahkh@osg.samsung.com | (970) 217-8978

Re: [PATCH 3.10 00/35] 3.10.95-stable review

[Willy Tarreau]

On Wed, Jan 20, 2016 at 04:14:51PM -0700, Shuah Khan wrote:
> On 01/20/2016 03:00 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.10.95 release.
> > There are 35 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Fri Jan 22 21:19:15 UTC 2016.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.10.95-rc1.gz
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> 
> Compiled and booted on my test system. No dmesg regressions.

And running fine on my laptop FWIW.

Willy

Re: [PATCH 3.10 00/35] 3.10.95-stable review

[Greg Kroah-Hartman]

On Thu, Jan 21, 2016 at 08:06:27AM +0100, Willy Tarreau wrote:
> On Wed, Jan 20, 2016 at 04:14:51PM -0700, Shuah Khan wrote:
> > On 01/20/2016 03:00 PM, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 3.10.95 release.
> > > There are 35 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > > 
> > > Responses should be made by Fri Jan 22 21:19:15 UTC 2016.
> > > Anything received after that time might be too late.
> > > 
> > > The whole patch series can be found in one patch at:
> > > 	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.10.95-rc1.gz
> > > and the diffstat can be found below.
> > > 
> > > thanks,
> > > 
> > > greg k-h
> > > 
> > 
> > Compiled and booted on my test system. No dmesg regressions.
> 
> And running fine on my laptop FWIW.

Heh, a laptop on 3.10, hopefully it's old hardware :)

thanks for testing,

greg k-h

Re: [PATCH 3.10 00/35] 3.10.95-stable review

[Willy Tarreau]

On Thu, Jan 21, 2016 at 11:52:20PM -0800, Greg Kroah-Hartman wrote:
> On Thu, Jan 21, 2016 at 08:06:27AM +0100, Willy Tarreau wrote:
> > And running fine on my laptop FWIW.
> 
> Heh, a laptop on 3.10, hopefully it's old hardware :)

Depends on what you mean by "old", it's an Atom N2800-based eeepc
(the last one with a button-equipped touchpad and mate screen). It's
also the one I use to test 2.6.32 on 32-bit.

Cheers,
Willy

Re: [PATCH 3.10 00/35] 3.10.95-stable review

[Guenter Roeck]

On 01/20/2016 02:00 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.10.95 release.
> There are 35 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Jan 22 21:19:15 UTC 2016.
> Anything received after that time might be too late.
>

Build results:
	total: 122 pass: 122 fail: 0
Qemu test results:
	total: 72 pass: 72 fail: 0

Details are available at http://kerneltests.org/builders.

Thanks,
Guenter