From: Huang Rui <ray.huang@amd.com>
To: Gioh Kim <gi-oh.kim@profitbricks.com>
Cc: <linux@roeck-us.net>, <bp@alien8.de>, <lm-sensors@lm-sensors.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] hwmon: (fam15h_power) Add bit masking for tdp_limit
Date: Thu, 28 Jan 2016 10:20:49 +0800 [thread overview]
Message-ID: <20160128022048.GA26655@hr-amur2> (raw)
In-Reply-To: <1453892529-17120-1-git-send-email-gi-oh.kim@profitbricks.com>
On Wed, Jan 27, 2016 at 12:02:09PM +0100, Gioh Kim wrote:
> Add bit masking to read ApmTdpLimit precisely
>
> Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Looks good for me too.
Acked-by: Huang Rui <ray.huang@amd.com>
> ---
> drivers/hwmon/fam15h_power.c | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
> index f77eb97..4f695d8 100644
> --- a/drivers/hwmon/fam15h_power.c
> +++ b/drivers/hwmon/fam15h_power.c
> @@ -90,7 +90,15 @@ static ssize_t show_power(struct device *dev,
> pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
> REG_TDP_LIMIT3, &val);
>
> - tdp_limit = val >> 16;
> + /*
> + * On Carrizo and later platforms, ApmTdpLimit bit field
> + * is extended to 16:31 from 16:28.
> + */
> + if (boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model >= 0x60)
> + tdp_limit = val >> 16;
> + else
> + tdp_limit = (val >> 16) & 0x1fff;
> +
> curr_pwr_watts = ((u64)(tdp_limit +
> data->base_tdp)) << running_avg_range;
> curr_pwr_watts -= running_avg_capture;
> --
> 2.5.0
>
next prev parent reply other threads:[~2016-01-28 2:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-27 11:02 [PATCH] hwmon: (fam15h_power) Add bit masking for tdp_limit Gioh Kim
2016-01-27 11:12 ` Borislav Petkov
2016-01-28 2:25 ` Huang Rui
2016-01-28 9:02 ` Gi-Oh Kim
2016-01-28 2:20 ` Huang Rui [this message]
2016-01-28 2:51 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160128022048.GA26655@hr-amur2 \
--to=ray.huang@amd.com \
--cc=bp@alien8.de \
--cc=gi-oh.kim@profitbricks.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox