Re: [PATCH] ASoC: fsl: select SND_SOC_FSL_SAI or SND_SOC_FSL_SSI depending on SoC type

["Lothar Waßmann" <LW@KARO-electronics.de>]

Hi,

On Thu, 28 Jan 2016 15:08:47 -0800 Nicolin Chen wrote:
> On Thu, Jan 28, 2016 at 11:33:52PM +0100, Mark Brown wrote:
> > On Wed, Jan 20, 2016 at 01:30:38PM +0100, Lothar Waßmann wrote:
> > 
> > > -	select SND_SOC_FSL_SSI
> > > +	select SND_SOC_FSL_SAI if SOC_IMX6UL
> > > +	select SND_SOC_FSL_SSI if SOC_IMX6Q || SOC_IMX6SL || SOC_IMX6SX
> > 
> > Does this card not work for older i.MXs (which had the same SSI/AUDMUX
> > combination as the majority of the i.MX6 family) as well?
> 
> It's widely used in older i.MXs according to their DTS files. So
> it should be safer to just leave SSI over here.
> 
Nothing prevents you to enable the SSI driver on any i.MX6 module.
The only change I made is to select the SAI driver instead of the SSI
driver on i.MX6UL because the i.MX6UL does not have an SSI unit!

> And I actually doubt the feasibility of running this driver with
> i.MX6UL as there might not be an AUDMUX on i.MX6UL since it does
> not have SSI any more while the driver always touches the address
> space of AUDMUX which may not exist on i.MX6UL.
>
#define this driver
The FSL_SAI driver does not touch the audmux address space in any way.
The simple-card audio driver works perfectly well with the FSL_SAI
driver on i.MX6UL.


Lothar Waßmann