[PATCH v9 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver

Wenyou Yang
2016-01-27T09:42:35Z

This patch adds support for the Active-semi ACT8945A PMIC.
It is a Multi Function Device with the following subdevices:
- Regulator
- Charger

It is interfaced to the host controller using I2C interface,
ACT8945A is a child device of the I2C.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
---

Changes in v9:
- remove unneeded struct act8945a_dev structure.
- collect Acked from Lee.
- collect Acked from Peter.

Changes in v8:
- change the subdevice's name "act8945a-pmic" to "act8945a-regulator".

Changes in v7:
- remove struct act8945a_dev to .c file.
- remove unused .h file.

Changes in v6:
- change MFD_ACT8945A type from bool to tristate.
- revert depends on to 'I2C'.

Changes in v5:
- change depends on to 'I2C=y'.

Changes in v4:
- add a space before .compatible.
- collect Reviewed-by from Krzysztof Kozlowski.

Changes in v3: None
Changes in v2:
- add more help information in Kconfig.
- update the file header with short version license and author line.
- remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
- use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
- use more explicit info to indicate the failure to add sub devices.
- remove the unnecessary print out.
- substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").

drivers/mfd/Kconfig | 11 +++++
drivers/mfd/Makefile | 1 +
drivers/mfd/act8945a.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 116 insertions(+)
create mode 100644 drivers/mfd/act8945a.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6c4ebd9..38994bb 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -18,6 +18,17 @@ config MFD_CS5535
This is the core driver for CS5535/CS5536 MFD functions. This is
necessary for using the board's GPIO and MFGPT functionality.

+config MFD_ACT8945A
+ tristate "Active-semi ACT8945A"
+ select MFD_CORE
+ select REGMAP_I2C
+ depends on I2C && OF
+ help
+ Support for the ACT8945A PMIC from Active-semi. This device
+ features three step-down DC/DC converters and four low-dropout
+ linear regulators, along with a complete ActivePath battery
+ charger.
+
config MFD_AS3711
bool "AMS AS3711"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 0f230a6..2f1ca82 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
+obj-$(CONFIG_MFD_ACT8945A) += act8945a.o
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c
new file mode 100644
index 0000000..f59eb99
--- /dev/null
+++ b/drivers/mfd/act8945a.c
@@ -0,0 +1,104 @@
+/*
+ * MFD driver for Active-semi ACT8945a PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation.
+ *
+ * Author: Wenyou Yang <wenyou.yang@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+static const struct mfd_cell act8945a_devs[] = {
+ {
+ .name = "act8945a-regulator",
+ .of_compatible = "active-semi,act8945a-regulator",
+ },
+ {
+ .name = "act8945a-charger",
+ .of_compatible = "active-semi,act8945a-charger",
+ },
+};
+
+static const struct regmap_config act8945a_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int act8945a_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ i2c_set_clientdata(i2c, regmap);
+
+ ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs,
+ ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to add sub devices\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int act8945a_i2c_remove(struct i2c_client *i2c)
+{
+ mfd_remove_devices(&i2c->dev);
+
+ return 0;
+}
+
+static const struct i2c_device_id act8945a_i2c_id[] = {
+ { "act8945a", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
+
+static const struct of_device_id act8945a_of_match[] = {
+ { .compatible = "active-semi,act8945a", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, act8945a_of_match);
+
+static struct i2c_driver act8945a_i2c_driver = {
+ .driver = {
+ .name = "act8945a",
+ .of_match_table = of_match_ptr(act8945a_of_match),
+ },
+ .probe = act8945a_i2c_probe,
+ .remove = act8945a_i2c_remove,
+ .id_table = act8945a_i2c_id,
+};
+
+static int __init act8945a_i2c_init(void)
+{
+ return i2c_add_driver(&act8945a_i2c_driver);
+}
+subsys_initcall(act8945a_i2c_init);
+
+static void __exit act8945a_i2c_exit(void)
+{
+ i2c_del_driver(&act8945a_i2c_driver);
+}
+module_exit(act8945a_i2c_exit);
+
+MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
+MODULE_LICENSE("GPL");
--
1.7.9.5