From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752721AbcBOJff (ORCPT ); Mon, 15 Feb 2016 04:35:35 -0500 Received: from protonic.xs4all.nl ([83.163.252.89]:63108 "EHLO protonic.xs4all.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752286AbcBOJfb (ORCPT ); Mon, 15 Feb 2016 04:35:31 -0500 Date: Mon, 15 Feb 2016 10:35:29 +0100 From: Robin van der Gracht To: Rob Herring Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Miguel Ojeda Sandonis Subject: Re: [PATCH v2] auxdisplay: ht16k33: Driver for LED controller. Message-ID: <20160215103529.69002c3b@erd979> In-Reply-To: <20160212151243.GA21022@rob-hp-laptop> References: <1455017468-4431-1-git-send-email-robin@protonic.nl> <20160212151243.GA21022@rob-hp-laptop> Organization: Protonic Holland X-Mailer: Claws Mail 3.12.0 (GTK+ 2.24.28; x86_64-pc-linux-gnu) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Fri, 12 Feb 2016 09:12:43 -0600 Rob Herring wrote: > On Tue, Feb 09, 2016 at 12:31:08PM +0100, Robin van der Gracht wrote: > > This is a driver for the Holtek HT16K33 LED controller with keyscan. > > > > Signed-off-by: Robin van der Gracht > > --- > > Changes in v2: > > - Fixed build error reported by kbuild test robot by including > > mm.h > > > > .../devicetree/bindings/display/ht16k33.txt | 42 ++ > > drivers/auxdisplay/Kconfig | 9 + > > drivers/auxdisplay/Makefile | 1 + > > drivers/auxdisplay/ht16k33.c | 573 > > +++++++++++++++++++++ 4 files changed, 625 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/display/ht16k33.txt create mode > > 100644 drivers/auxdisplay/ht16k33.c > > > > diff --git a/Documentation/devicetree/bindings/display/ht16k33.txt > > b/Documentation/devicetree/bindings/display/ht16k33.txt new file > > mode 100644 index 0000000..45fbabb > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/ht16k33.txt > > @@ -0,0 +1,42 @@ > > +Holtek ht16k33 RAM mapping 16*8 LED controller driver with keyscan > > +------------------------------------------------------------------------------- > > + > > +Required properties: > > +- compatible: "ht,ht16k33" > > +- reg: I2C slave address of > > the chip. +- interrupt-parent: A phandle pointing to the > > interrupt controller > > + serving the > > interrupt for this chip. +- interrupts: > > Interrupt specification for the key pressed interrupt. +- > > refresh-rate: Display update interval in HZ. > > Add units: "-hz" > > > +- debounce-delay-ms: Debouncing interval time in > > microseconds. +- linux,keymap: The keymap > > for keys as described in the binding > > + document > > (devicetree/bindings/input/matrix-keymap.txt). > > The alignment of the descriptions here seem to be random. Please line > them up. > > > + > > +Optional properties: > > +- linux,no-autorepeat: Disable keyrepeat. > > +- default-brightness: Initial brightness setting [0-15] (15 > > if not set). > > default-brightness-level seem a bit more common. > Thanks for reviewing Rob. I'll take your comments into account and resend an adjusted patch. Best regards, -- Robin van der Gracht Protonic Holland tel.: +31 (0) 229 212928 fax.: +31 (0) 229 210930 Factorij 36 / 1689 AL Zwaag