From: Han Xu <xhnjupt@gmail.com>
To: Yunhui Cui <B56489@freescale.com>
Cc: dwmw2@infradead.org, computersforpeace@gmail.com,
han.xu@freescale.com, linux-mtd@lists.infradead.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, yao.yuan@nxp.com
Subject: Re: [PATCH v2 3/4] mtd:spi-nor:fsl-quadspi:Add fast-read mode support
Date: Thu, 18 Feb 2016 02:07:42 +0800 [thread overview]
Message-ID: <20160217180742.GB17485@shlinux2> (raw)
In-Reply-To: <1454326208-4533-3-git-send-email-B56489@freescale.com>
On Mon, Feb 01, 2016 at 07:30:07PM +0800, Yunhui Cui wrote:
> The qspi driver add generic fast-read mode for different
> flash venders. There are some different board flash work on
> different mode, such fast-read, quad-mode.
> So we have to modify the third entrace parameter of spi_nor_scan().
>
> Signed-off-by: Yunhui Cui <B56489@freescale.com>
> ---
> drivers/mtd/spi-nor/fsl-quadspi.c | 27 +++++++++++++++++++++------
> 1 file changed, 21 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
> index 9861290..0a31cb1 100644
> --- a/drivers/mtd/spi-nor/fsl-quadspi.c
> +++ b/drivers/mtd/spi-nor/fsl-quadspi.c
> @@ -389,11 +389,21 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
> /* Read */
> lut_base = SEQID_READ * 4;
>
> - qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen),
> - base + QUADSPI_LUT(lut_base));
> - qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) |
> - LUT1(FSL_READ, PAD4, rxfifo),
> - base + QUADSPI_LUT(lut_base + 1));
> + if (nor->flash_read == SPI_NOR_FAST) {
> + qspi_writel(q, LUT0(CMD, PAD1, read_op) |
> + LUT1(ADDR, PAD1, addrlen),
> + base + QUADSPI_LUT(lut_base));
> + qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) |
> + LUT1(FSL_READ, PAD1, rxfifo),
> + base + QUADSPI_LUT(lut_base + 1));
> + } else if (nor->flash_read == SPI_NOR_QUAD) {
> + qspi_writel(q, LUT0(CMD, PAD1, read_op) |
> + LUT1(ADDR, PAD1, addrlen),
> + base + QUADSPI_LUT(lut_base));
> + qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) |
> + LUT1(FSL_READ, PAD4, rxfifo),
> + base + QUADSPI_LUT(lut_base + 1));
> + }
>
> /* Write enable */
> lut_base = SEQID_WREN * 4;
> @@ -468,6 +478,7 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
> {
> switch (cmd) {
> case SPINOR_OP_READ_1_1_4:
> + case SPINOR_OP_READ_FAST:
> return SEQID_READ;
> case SPINOR_OP_WREN:
> return SEQID_WREN;
> @@ -963,6 +974,7 @@ static int fsl_qspi_probe(struct platform_device *pdev)
> struct spi_nor *nor;
> struct mtd_info *mtd;
> int ret, i = 0;
> + enum read_mode mode = SPI_NOR_QUAD;
>
> q = devm_kzalloc(dev, sizeof(*q), GFP_KERNEL);
> if (!q)
> @@ -1064,7 +1076,10 @@ static int fsl_qspi_probe(struct platform_device *pdev)
> /* set the chip address for READID */
> fsl_qspi_set_base_addr(q, nor);
>
> - ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
> + ret = of_property_read_bool(np, "m25p,fast-read");
> + mode = (ret) ? SPI_NOR_FAST : SPI_NOR_QUAD;
> +
> + ret = spi_nor_scan(nor, NULL, mode);
> if (ret)
> goto mutex_failed;
>
I understand you want to provide a more generic read mode, but this is a quad
spi driver, I prefer to provide the options, either quad read/quad IO read,
or just normal read.
> --
> 2.1.0.27.g96db324
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2016-02-17 18:11 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-01 11:30 [PATCH v2 1/4] mtd:fsl-quadspi:use the property fields of SPI-NOR Yunhui Cui
2016-02-01 11:30 ` [PATCH v2 2/4] mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ Yunhui Cui
2016-02-01 11:30 ` [PATCH v2 3/4] mtd:spi-nor:fsl-quadspi:Add fast-read mode support Yunhui Cui
2016-02-17 18:07 ` Han Xu [this message]
2016-02-25 8:07 ` Yunhui Cui
2016-02-26 16:31 ` Han Xu
2016-02-29 3:43 ` Yunhui Cui
2016-02-29 20:17 ` Han Xu
2016-03-02 1:50 ` Yunhui Cui
2016-02-01 11:30 ` [PATCH v2 4/4] mtd:spi_nor: Disable Micron flash HW protection Yunhui Cui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160217180742.GB17485@shlinux2 \
--to=xhnjupt@gmail.com \
--cc=B56489@freescale.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=han.xu@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=yao.yuan@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).