From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Mike Christie <mchristi@redhat.com>,
Nicholas Bellinger <nab@linux-iscsi.org>
Subject: [PATCH 3.14 36/36] target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors
Date: Mon, 7 Mar 2016 15:46:19 -0800 [thread overview]
Message-ID: <20160307234605.677329606@linuxfoundation.org> (raw)
In-Reply-To: <20160307234600.344036091@linuxfoundation.org>
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Christie <mchristi@redhat.com>
commit 8a9ebe717a133ba7bc90b06047f43cc6b8bcb8b3 upstream.
In a couple places we are not converting to/from the Linux
block layer 512 bytes sectors.
1.
The request queue values and what we do are a mismatch of
things:
max_discard_sectors - This is in linux block layer 512 byte
sectors. We are just copying this to max_unmap_lba_count.
discard_granularity - This is in bytes. We are converting it
to Linux block layer 512 byte sectors.
discard_alignment - This is in bytes. We are just copying
this over.
The problem is that the core LIO code exports these values in
spc_emulate_evpd_b0 and we use them to test request arguments
in sbc_execute_unmap, but we never convert to the block size
we export to the initiator. If we are not using 512 byte sectors
then we are exporting the wrong values or are checks are off.
And, for the discard_alignment/bytes case we are just plain messed
up.
2.
blkdev_issue_discard's start and number of sector arguments
are supposed to be in linux block layer 512 byte sectors. We are
currently passing in the values we get from the initiator which
might be based on some other sector size.
There is a similar problem in iblock_execute_write_same where
the bio functions want values in 512 byte sectors but we are
passing in what we got from the initiator.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/target/target_core_device.c | 43 ++++++++++++++++++++++++++
drivers/target/target_core_file.c | 29 +++++-------------
drivers/target/target_core_iblock.c | 56 ++++++++---------------------------
include/target/target_core_backend.h | 4 ++
4 files changed, 70 insertions(+), 62 deletions(-)
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -1577,6 +1577,49 @@ struct se_device *target_alloc_device(st
return dev;
}
+/*
+ * Check if the underlying struct block_device request_queue supports
+ * the QUEUE_FLAG_DISCARD bit for UNMAP/WRITE_SAME in SCSI + TRIM
+ * in ATA and we need to set TPE=1
+ */
+bool target_configure_unmap_from_queue(struct se_dev_attrib *attrib,
+ struct request_queue *q, int block_size)
+{
+ if (!blk_queue_discard(q))
+ return false;
+
+ attrib->max_unmap_lba_count = (q->limits.max_discard_sectors << 9) /
+ block_size;
+ /*
+ * Currently hardcoded to 1 in Linux/SCSI code..
+ */
+ attrib->max_unmap_block_desc_count = 1;
+ attrib->unmap_granularity = q->limits.discard_granularity / block_size;
+ attrib->unmap_granularity_alignment = q->limits.discard_alignment /
+ block_size;
+ return true;
+}
+EXPORT_SYMBOL(target_configure_unmap_from_queue);
+
+/*
+ * Convert from blocksize advertised to the initiator to the 512 byte
+ * units unconditionally used by the Linux block layer.
+ */
+sector_t target_to_linux_sector(struct se_device *dev, sector_t lb)
+{
+ switch (dev->dev_attrib.block_size) {
+ case 4096:
+ return lb << 3;
+ case 2048:
+ return lb << 2;
+ case 1024:
+ return lb << 1;
+ default:
+ return lb;
+ }
+}
+EXPORT_SYMBOL(target_to_linux_sector);
+
int target_configure_device(struct se_device *dev)
{
struct se_hba *hba = dev->se_hba;
--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -164,25 +164,11 @@ static int fd_configure_device(struct se
" block_device blocks: %llu logical_block_size: %d\n",
dev_size, div_u64(dev_size, fd_dev->fd_block_size),
fd_dev->fd_block_size);
- /*
- * Check if the underlying struct block_device request_queue supports
- * the QUEUE_FLAG_DISCARD bit for UNMAP/WRITE_SAME in SCSI + TRIM
- * in ATA and we need to set TPE=1
- */
- if (blk_queue_discard(q)) {
- dev->dev_attrib.max_unmap_lba_count =
- q->limits.max_discard_sectors;
- /*
- * Currently hardcoded to 1 in Linux/SCSI code..
- */
- dev->dev_attrib.max_unmap_block_desc_count = 1;
- dev->dev_attrib.unmap_granularity =
- q->limits.discard_granularity >> 9;
- dev->dev_attrib.unmap_granularity_alignment =
- q->limits.discard_alignment;
+
+ if (target_configure_unmap_from_queue(&dev->dev_attrib, q,
+ fd_dev->fd_block_size))
pr_debug("IFILE: BLOCK Discard support available,"
- " disabled by default\n");
- }
+ " disabled by default\n");
/*
* Enable write same emulation for IBLOCK and use 0xFFFF as
* the smaller WRITE_SAME(10) only has a two-byte block count.
@@ -545,9 +531,12 @@ fd_do_unmap(struct se_cmd *cmd, void *pr
if (S_ISBLK(inode->i_mode)) {
/* The backend is block device, use discard */
struct block_device *bdev = inode->i_bdev;
+ struct se_device *dev = cmd->se_dev;
- ret = blkdev_issue_discard(bdev, lba,
- nolb, GFP_KERNEL, 0);
+ ret = blkdev_issue_discard(bdev,
+ target_to_linux_sector(dev, lba),
+ target_to_linux_sector(dev, nolb),
+ GFP_KERNEL, 0);
if (ret < 0) {
pr_warn("FILEIO: blkdev_issue_discard() failed: %d\n",
ret);
--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -126,27 +126,11 @@ static int iblock_configure_device(struc
dev->dev_attrib.hw_max_sectors = queue_max_hw_sectors(q);
dev->dev_attrib.hw_queue_depth = q->nr_requests;
- /*
- * Check if the underlying struct block_device request_queue supports
- * the QUEUE_FLAG_DISCARD bit for UNMAP/WRITE_SAME in SCSI + TRIM
- * in ATA and we need to set TPE=1
- */
- if (blk_queue_discard(q)) {
- dev->dev_attrib.max_unmap_lba_count =
- q->limits.max_discard_sectors;
-
- /*
- * Currently hardcoded to 1 in Linux/SCSI code..
- */
- dev->dev_attrib.max_unmap_block_desc_count = 1;
- dev->dev_attrib.unmap_granularity =
- q->limits.discard_granularity >> 9;
- dev->dev_attrib.unmap_granularity_alignment =
- q->limits.discard_alignment;
-
+ if (target_configure_unmap_from_queue(&dev->dev_attrib, q,
+ dev->dev_attrib.hw_block_size))
pr_debug("IBLOCK: BLOCK Discard support available,"
- " disabled by default\n");
- }
+ " disabled by default\n");
+
/*
* Enable write same emulation for IBLOCK and use 0xFFFF as
* the smaller WRITE_SAME(10) only has a two-byte block count.
@@ -418,9 +402,13 @@ iblock_do_unmap(struct se_cmd *cmd, void
sector_t lba, sector_t nolb)
{
struct block_device *bdev = priv;
+ struct se_device *dev = cmd->se_dev;
int ret;
- ret = blkdev_issue_discard(bdev, lba, nolb, GFP_KERNEL, 0);
+ ret = blkdev_issue_discard(bdev,
+ target_to_linux_sector(dev, lba),
+ target_to_linux_sector(dev, nolb),
+ GFP_KERNEL, 0);
if (ret < 0) {
pr_err("blkdev_issue_discard() failed: %d\n", ret);
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
@@ -460,8 +448,10 @@ iblock_execute_write_same(struct se_cmd
struct scatterlist *sg;
struct bio *bio;
struct bio_list list;
- sector_t block_lba = cmd->t_task_lba;
- sector_t sectors = sbc_get_write_same_sectors(cmd);
+ struct se_device *dev = cmd->se_dev;
+ sector_t block_lba = target_to_linux_sector(dev, cmd->t_task_lba);
+ sector_t sectors = target_to_linux_sector(dev,
+ sbc_get_write_same_sectors(cmd));
sg = &cmd->t_data_sg[0];
@@ -670,12 +660,12 @@ iblock_execute_rw(struct se_cmd *cmd, st
enum dma_data_direction data_direction)
{
struct se_device *dev = cmd->se_dev;
+ sector_t block_lba = target_to_linux_sector(dev, cmd->t_task_lba);
struct iblock_req *ibr;
struct bio *bio, *bio_start;
struct bio_list list;
struct scatterlist *sg;
u32 sg_num = sgl_nents;
- sector_t block_lba;
unsigned bio_cnt;
int rw = 0;
int i;
@@ -701,24 +691,6 @@ iblock_execute_rw(struct se_cmd *cmd, st
rw = READ;
}
- /*
- * Convert the blocksize advertised to the initiator to the 512 byte
- * units unconditionally used by the Linux block layer.
- */
- if (dev->dev_attrib.block_size == 4096)
- block_lba = (cmd->t_task_lba << 3);
- else if (dev->dev_attrib.block_size == 2048)
- block_lba = (cmd->t_task_lba << 2);
- else if (dev->dev_attrib.block_size == 1024)
- block_lba = (cmd->t_task_lba << 1);
- else if (dev->dev_attrib.block_size == 512)
- block_lba = cmd->t_task_lba;
- else {
- pr_err("Unsupported SCSI -> BLOCK LBA conversion:"
- " %u\n", dev->dev_attrib.block_size);
- return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
- }
-
ibr = kzalloc(sizeof(struct iblock_req), GFP_KERNEL);
if (!ibr)
goto fail;
--- a/include/target/target_core_backend.h
+++ b/include/target/target_core_backend.h
@@ -94,4 +94,8 @@ sense_reason_t transport_generic_map_mem
void array_free(void *array, int n);
+sector_t target_to_linux_sector(struct se_device *dev, sector_t lb);
+bool target_configure_unmap_from_queue(struct se_dev_attrib *attrib,
+ struct request_queue *q, int block_size);
+
#endif /* TARGET_CORE_BACKEND_H */
next prev parent reply other threads:[~2016-03-07 23:51 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-07 23:45 [PATCH 3.14 00/36] 3.14.64-stable review Greg Kroah-Hartman
2016-03-07 23:45 ` [PATCH 3.14 01/36] bio: return EINTR if copying to user space got interrupted Greg Kroah-Hartman
2016-03-07 23:45 ` [PATCH 3.14 02/36] locks: fix unlock when fcntl_setlk races with a close Greg Kroah-Hartman
2016-03-07 23:45 ` [PATCH 3.14 03/36] EDAC, mc_sysfs: Fix freeing bus name Greg Kroah-Hartman
2016-03-07 23:45 ` [PATCH 3.14 04/36] cifs: fix out-of-bounds access in lease parsing Greg Kroah-Hartman
2016-03-07 23:45 ` [PATCH 3.14 05/36] CIFS: Fix SMB2+ interim response processing for read requests Greg Kroah-Hartman
2016-03-07 23:45 ` [PATCH 3.14 06/36] iommu/amd: Fix boot warning when device 00:00.0 is not iommu covered Greg Kroah-Hartman
2016-03-07 23:45 ` [PATCH 3.14 07/36] x86/entry/compat: Add missing CLAC to entry_INT80_32 Greg Kroah-Hartman
2016-03-07 23:45 ` [PATCH 3.14 08/36] drm/ast: Fix incorrect register check for DRAM width Greg Kroah-Hartman
2016-03-07 23:45 ` [PATCH 3.14 09/36] libata: fix HDIO_GET_32BIT ioctl Greg Kroah-Hartman
2016-03-07 23:45 ` [PATCH 3.14 10/36] libata: Align ata_devices id on a cacheline Greg Kroah-Hartman
2016-03-07 23:45 ` [PATCH 3.14 11/36] PM / sleep / x86: Fix crash on graph trace through x86 suspend Greg Kroah-Hartman
2016-03-07 23:45 ` [PATCH 3.14 12/36] Revert "jffs2: Fix lock acquisition order bug in jffs2_write_begin" Greg Kroah-Hartman
2016-03-07 23:45 ` [PATCH 3.14 15/36] ALSA: ctl: Fix ioctls for X32 ABI Greg Kroah-Hartman
2016-03-07 23:45 ` [PATCH 3.14 16/36] ALSA: rawmidi: Fix ioctls " Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 17/36] ALSA: timer: Fix ioctls for " Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 18/36] ALSA: seq: oss: Dont drain at closing a client Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 19/36] ALSA: hdspm: Fix wrong boolean ctl value accesses Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 20/36] ALSA: hdsp: " Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 21/36] ALSA: hdspm: Fix zero-division Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 22/36] ALSA: timer: Fix broken compat timer user status ioctl Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 23/36] usb: chipidea: otg: change workqueue ci_otg as freezable Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 24/36] USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 25/36] USB: serial: option: add support for Telit LE922 PID 0x1045 Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 26/36] USB: serial: option: add support for Quectel UC20 Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 27/36] MIPS: traps: Fix SIGFPE information leak from `do_ov and `do_trap_or_bp Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 28/36] ubi: Fix out of bounds write in volume update code Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 29/36] target: Fix Task Aborted Status (TAS) handling Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 30/36] target: Add TFO->abort_task for aborted task resources release Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 31/36] target: Fix LUN_RESET active TMR descriptor handling Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 32/36] target: Fix LUN_RESET active I/O handling for ACK_KREF Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 34/36] target: Fix remote-port TMR ABORT + se_cmd fabric stop Greg Kroah-Hartman
2016-03-07 23:46 ` [PATCH 3.14 35/36] target: Fix race with SCF_SEND_DELAYED_TAS handling Greg Kroah-Hartman
2016-03-07 23:46 ` Greg Kroah-Hartman [this message]
2016-03-08 11:44 ` [PATCH 3.14 00/36] 3.14.64-stable review Guenter Roeck
2016-03-08 16:20 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160307234605.677329606@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mchristi@redhat.com \
--cc=nab@linux-iscsi.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox