From: Finn Thain <fthain@telegraphics.com.au>
To: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Michael Schmitz <schmitzmic@gmail.com>,
<linux-m68k@vger.kernel.org>, <linux-scsi@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: Ondrej Zary <linux@rainbow-software.org>, Sam Creasey <sammy@sammy.net>
Subject: [PATCH v3 11/23] atari_scsi: Adopt NCR5380.c core driver
Date: Mon, 21 Mar 2016 13:32:00 +1100 [thread overview]
Message-ID: <20160321023152.534059128@telegraphics.com.au> (raw)
In-Reply-To: 20160321023149.604138431@telegraphics.com.au
[-- Attachment #1: atari_scsi-adopt-NCR5380-c --]
[-- Type: text/plain, Size: 4428 bytes --]
Add support for the Atari ST DMA chip to the NCR5380.c core driver.
This code is copied from atari_NCR5380.c.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 32 ++++++++++++++++++++++++++++++++
drivers/scsi/atari_scsi.c | 6 +++---
2 files changed, 35 insertions(+), 3 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-03-21 13:31:27.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-03-21 13:31:31.000000000 +1100
@@ -29,6 +29,8 @@
* Ronald van Cuijlenborg, Alan Cox and others.
*/
+/* Ported to Atari by Roman Hodek and others. */
+
/*
* Further development / testing that should be done :
*
@@ -141,6 +143,14 @@
#define NCR5380_io_delay(x)
#endif
+#ifndef NCR5380_acquire_dma_irq
+#define NCR5380_acquire_dma_irq(x) (1)
+#endif
+
+#ifndef NCR5380_release_dma_irq
+#define NCR5380_release_dma_irq(x)
+#endif
+
static int do_abort(struct Scsi_Host *);
static void do_reset(struct Scsi_Host *);
@@ -658,6 +668,9 @@ static int NCR5380_queue_command(struct
cmd->result = 0;
+ if (!NCR5380_acquire_dma_irq(instance))
+ return SCSI_MLQUEUE_HOST_BUSY;
+
spin_lock_irqsave(&hostdata->lock, flags);
/*
@@ -682,6 +695,19 @@ static int NCR5380_queue_command(struct
return 0;
}
+static inline void maybe_release_dma_irq(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ /* Caller does the locking needed to set & test these data atomically */
+ if (list_empty(&hostdata->disconnected) &&
+ list_empty(&hostdata->unissued) &&
+ list_empty(&hostdata->autosense) &&
+ !hostdata->connected &&
+ !hostdata->selecting)
+ NCR5380_release_dma_irq(instance);
+}
+
/**
* dequeue_next_cmd - dequeue a command for processing
* @instance: the scsi host instance
@@ -783,6 +809,7 @@ static void NCR5380_main(struct work_str
if (!NCR5380_select(instance, cmd)) {
dsprintk(NDEBUG_MAIN, instance, "main: select complete\n");
+ maybe_release_dma_irq(instance);
} else {
dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES, instance,
"main: select failed, returning %p to queue\n", cmd);
@@ -1828,6 +1855,8 @@ static void NCR5380_information_transfer
/* Enable reselect interrupts */
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+
+ maybe_release_dma_irq(instance);
return;
case MESSAGE_REJECT:
/* Accept message by clearing ACK */
@@ -1963,6 +1992,7 @@ static void NCR5380_information_transfer
hostdata->connected = NULL;
cmd->result = DID_ERROR << 16;
complete_cmd(instance, cmd);
+ maybe_release_dma_irq(instance);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return;
}
@@ -2256,6 +2286,7 @@ out:
dsprintk(NDEBUG_ABORT, instance, "abort: successfully aborted %p\n", cmd);
queue_work(hostdata->work_q, &hostdata->main_task);
+ maybe_release_dma_irq(instance);
spin_unlock_irqrestore(&hostdata->lock, flags);
return result;
@@ -2336,6 +2367,7 @@ static int NCR5380_bus_reset(struct scsi
hostdata->dma_len = 0;
queue_work(hostdata->work_q, &hostdata->main_task);
+ maybe_release_dma_irq(instance);
spin_unlock_irqrestore(&hostdata->lock, flags);
return SUCCESS;
Index: linux/drivers/scsi/atari_scsi.c
===================================================================
--- linux.orig/drivers/scsi/atari_scsi.c 2016-03-21 13:31:25.000000000 +1100
+++ linux/drivers/scsi/atari_scsi.c 2016-03-21 13:31:31.000000000 +1100
@@ -99,9 +99,9 @@
#define NCR5380_abort atari_scsi_abort
#define NCR5380_info atari_scsi_info
-#define NCR5380_dma_read_setup(instance, data, count) \
+#define NCR5380_dma_recv_setup(instance, data, count) \
atari_scsi_dma_setup(instance, data, count, 0)
-#define NCR5380_dma_write_setup(instance, data, count) \
+#define NCR5380_dma_send_setup(instance, data, count) \
atari_scsi_dma_setup(instance, data, count, 1)
#define NCR5380_dma_residual(instance) \
atari_scsi_dma_residual(instance)
@@ -715,7 +715,7 @@ static void atari_scsi_falcon_reg_write(
}
-#include "atari_NCR5380.c"
+#include "NCR5380.c"
static int atari_scsi_bus_reset(struct scsi_cmnd *cmd)
{
next prev parent reply other threads:[~2016-03-21 4:09 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-21 2:31 [PATCH v3 00/23] ncr5380: Eliminate macros, reduce code duplication, fix bugs etc Finn Thain
2016-03-21 2:31 ` [PATCH v3 01/23] g_ncr5380: Remove CONFIG_SCSI_GENERIC_NCR53C400 Finn Thain
2016-03-21 2:31 ` [PATCH v3 02/23] ncr5380: Remove FLAG_NO_PSEUDO_DMA where possible Finn Thain
2016-03-21 2:31 ` [PATCH v3 03/23] ncr5380: Remove REAL_DMA and REAL_DMA_POLL macros Finn Thain
2016-03-21 2:31 ` [PATCH v3 04/23] atari_NCR5380: Remove DMA_MIN_SIZE macro Finn Thain
2016-03-23 7:27 ` Hannes Reinecke
2016-03-21 2:31 ` [PATCH v3 05/23] ncr5380: Disable the DMA errata workaround flag by default Finn Thain
2016-03-21 2:31 ` [PATCH v3 06/23] ncr5380: Remove PSEUDO_DMA macro Finn Thain
2016-03-21 2:31 ` [PATCH v3 07/23] ncr5380: Remove BOARD_REQUIRES_NO_DELAY macro Finn Thain
2016-03-21 2:31 ` [PATCH v3 08/23] ncr5380: Use DMA hooks for PDMA Finn Thain
2016-03-21 2:31 ` [PATCH v3 09/23] ncr5380: Adopt uniform DMA setup convention Finn Thain
2016-03-21 2:31 ` [PATCH v3 10/23] ncr5380: Merge DMA implementation from atari_NCR5380 core driver Finn Thain
2016-03-21 2:32 ` Finn Thain [this message]
2016-03-21 2:32 ` [PATCH v3 12/23] sun3_scsi: Adopt NCR5380.c " Finn Thain
2016-03-21 2:32 ` [PATCH v3 13/23] ncr5380: Remove disused atari_NCR5380.c " Finn Thain
2016-03-21 2:32 ` [PATCH v3 14/23] ncr5380: Reduce max_lun limit Finn Thain
2016-03-23 7:28 ` Hannes Reinecke
2016-03-21 2:32 ` [PATCH v3 15/23] dmx3191d: Drop max_sectors limit Finn Thain
2016-03-21 2:32 ` [PATCH v3 16/23] ncr5380: Fix register decoding for debugging Finn Thain
2016-03-21 2:32 ` [PATCH v3 17/23] ncr5380: Remove remaining register storage qualifiers Finn Thain
2016-03-21 2:32 ` [PATCH v3 18/23] ncr5380: Remove DONT_USE_INTR and AUTOPROBE_IRQ macros Finn Thain
2016-03-21 2:32 ` [PATCH v3 19/23] ncr5380: Update usage documentation Finn Thain
2016-03-21 2:32 ` [PATCH v3 20/23] atari_scsi: Set a reasonable default for cmd_per_lun Finn Thain
2016-03-23 7:28 ` Hannes Reinecke
2016-03-21 2:32 ` [PATCH v3 21/23] atari_scsi: Allow can_queue to be increased for Falcon Finn Thain
2016-03-21 2:32 ` [PATCH v3 22/23] mac_scsi: Fix pseudo DMA implementation Finn Thain
2016-03-21 2:32 ` [PATCH v3 23/23] ncr5380: Call complete_cmd() for disconnected commands on bus reset Finn Thain
2016-03-23 7:29 ` Hannes Reinecke
2016-03-22 22:24 ` [PATCH v3 00/23] ncr5380: Eliminate macros, reduce code duplication, fix bugs etc Ondrej Zary
2016-03-23 1:35 ` Finn Thain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160321023152.534059128@telegraphics.com.au \
--to=fthain@telegraphics.com.au \
--cc=James.Bottomley@HansenPartnership.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linux@rainbow-software.org \
--cc=martin.petersen@oracle.com \
--cc=sammy@sammy.net \
--cc=schmitzmic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox