public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Ralf Baechle <ralf@linux-mips.org>
To: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org, Lars Persson <lars.persson@axis.com>,
	linux-kernel@vger.kernel.org,
	Andrew Morton <akpm@linux-foundation.org>,
	"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Subject: Re: [PATCH 2/4] MIPS: Flush highmem pages in __flush_dcache_page
Date: Tue, 29 Mar 2016 10:35:43 +0200	[thread overview]
Message-ID: <20160329083543.GD11282@linux-mips.org> (raw)
In-Reply-To: <1456799879-14711-3-git-send-email-paul.burton@imgtec.com>

On Tue, Mar 01, 2016 at 02:37:57AM +0000, Paul Burton wrote:

> When flush_dcache_page is called on an executable page, that page is
> about to be provided to userland & we can presume that the icache
> contains no valid entries for its address range. However if the icache
> does not fill from the dcache then we cannot presume that the pages
> content has been written back as far as the memories that the dcache
> will fill from (ie. L2 or further out).
> 
> This was being done for lowmem pages, but not for highmem which can lead
> to icache corruption. Fix this by mapping highmem pages & flushing their
> content from the dcache in __flush_dcache_page before providing the page
> to userland, just as is done for lowmem pages.
> 
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> Cc: Lars Persson <lars.persson@axis.com>
> ---
> 
>  arch/mips/mm/cache.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
> index 3f159ca..5a67d8c 100644
> --- a/arch/mips/mm/cache.c
> +++ b/arch/mips/mm/cache.c
> @@ -16,6 +16,7 @@
>  #include <linux/mm.h>
>  
>  #include <asm/cacheflush.h>
> +#include <asm/highmem.h>
>  #include <asm/processor.h>
>  #include <asm/cpu.h>
>  #include <asm/cpu-features.h>
> @@ -83,8 +84,6 @@ void __flush_dcache_page(struct page *page)
>  	struct address_space *mapping = page_mapping(page);
>  	unsigned long addr;
>  
> -	if (PageHighMem(page))
> -		return;
>  	if (mapping && !mapping_mapped(mapping)) {
>  		SetPageDcacheDirty(page);
>  		return;
> @@ -95,8 +94,15 @@ void __flush_dcache_page(struct page *page)
>  	 * case is for exec env/arg pages and those are %99 certainly going to
>  	 * get faulted into the tlb (and thus flushed) anyways.
>  	 */
> -	addr = (unsigned long) page_address(page);
> +	if (PageHighMem(page))
> +		addr = (unsigned long)kmap_atomic(page);
> +	else
> +		addr = (unsigned long)page_address(page);
> +
>  	flush_data_cache_page(addr);
> +
> +	if (PageHighMem(page))
> +		__kunmap_atomic((void *)addr);
>  }
>  
>  EXPORT_SYMBOL(__flush_dcache_page);

I don't see how this should work with cache aliases.  If the page is unmapped
kmap_atomic will pick a deterministic address only under some circumstances,
kmap won't.  As the result the wrong cache way will be flushed out, I think.

  Ralf

  reply	other threads:[~2016-03-29  8:35 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-01  2:37 [PATCH 0/4] MIPS cache & highmem fixes Paul Burton
2016-03-01  2:37 ` [PATCH 1/4] MIPS: Flush dcache for flush_kernel_dcache_page Paul Burton
2016-03-04 15:09   ` Lars Persson
2016-03-29  8:29     ` Ralf Baechle
2016-03-01  2:37 ` [PATCH 2/4] MIPS: Flush highmem pages in __flush_dcache_page Paul Burton
2016-03-29  8:35   ` Ralf Baechle [this message]
2016-03-29  8:55     ` Paul Burton
2016-03-01  2:37 ` [PATCH 3/4] MIPS: Handle highmem pages in __update_cache Paul Burton
2016-03-29  8:39   ` Ralf Baechle
     [not found] ` <1456799879-14711-5-git-send-email-paul.burton@imgtec.com>
     [not found]   ` <56D5CDB3.80407@caviumnetworks.com>
     [not found]     ` <20160301171940.GA26791@NP-P-BURTON>
2016-03-02 14:12       ` [PATCH 4/4] MIPS: Sync icache & dcache in set_pte_at Ralf Baechle
2016-03-03  3:03   ` [4/4] " Leonid Yegoshin
2016-03-04 19:02   ` [PATCH 4/4] " Lars Persson
2016-03-05  0:21     ` Paul Burton
2016-03-05  0:27       ` Paul Burton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160329083543.GD11282@linux-mips.org \
    --to=ralf@linux-mips.org \
    --cc=akpm@linux-foundation.org \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=lars.persson@axis.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=paul.burton@imgtec.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox