Re: [PATCH 4/7] ARM: dts: Enable N950 keyboard sleep leds by default

[Pavel Machek <pavel@ucw.cz>]

Hi!

For 1-3 in the series, Acked-by: Pavel Machek <pavel@ucw.cz>

> Like the Nokia N900, the N950 has leds to show
> the state of sys_clkreq and sys_off_mode pins.
> 
> A detailed description for the LEDs and
> OMAP's sleep states can be found in Tony's
> commit for the Nokia N900:
> 
> c1be2032f66df9e1238bd5bc4ca666de88a62abc

I must say I've seen it on N900, and yes, it is useful, but no, I
don't think this is right.

This is not a LED. This is a interface that changes meaning of two
other LEDs. I guess it should go to debugfs somewhere.

Best regards,
								Pavel
								
> Signed-off-by: Sebastian Reichel <sre@kernel.org>

> +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
> @@ -31,9 +31,27 @@
>  		startup-delay-us = <150>;
>  		enable-active-high;
>  	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		heartbeat {
> +			label = "debug::sleep";
> +			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;  /* gpio92 */
> +			linux,default-trigger = "default-on";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&debug_leds>;
> +		};
> +	};
>  };
>  
>  &omap3_pmx_core {
> +	debug_leds: pinmux_debug_led_pins {
> +		pinctrl-single,pins = <
> +			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4)       /* dss_data22.gpio_92 */
> +		>;
> +	};
> +
>  	mmc2_pins: pinmux_mmc2_pins {
>  		pinctrl-single,pins = <
>  			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html