* [PATCH] mmc: Remove some redundant debug prints
@ 2016-04-06 11:38 Baolin Wang
2016-04-06 11:57 ` Jisheng Zhang
0 siblings, 1 reply; 5+ messages in thread
From: Baolin Wang @ 2016-04-06 11:38 UTC (permalink / raw)
To: ulf.hansson
Cc: adrian.hunter, rmk+kernel, shawn.lin, dianders, david, broonie,
linus.walleij, takahiro.akashi, baolin.wang, linux-kernel,
linux-mmc
This patch removes some redundant debug prints, since we have added some
tracepoints to help with performance analysis of MMC subsystem.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
drivers/mmc/core/core.c | 52 -----------------------------------------------
1 file changed, 52 deletions(-)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index f80b3ab..3f1362a 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -157,33 +157,6 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
led_trigger_event(host->led, LED_OFF);
- if (mrq->sbc) {
- pr_debug("%s: req done <CMD%u>: %d: %08x %08x %08x %08x\n",
- mmc_hostname(host), mrq->sbc->opcode,
- mrq->sbc->error,
- mrq->sbc->resp[0], mrq->sbc->resp[1],
- mrq->sbc->resp[2], mrq->sbc->resp[3]);
- }
-
- pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
- mmc_hostname(host), cmd->opcode, err,
- cmd->resp[0], cmd->resp[1],
- cmd->resp[2], cmd->resp[3]);
-
- if (mrq->data) {
- pr_debug("%s: %d bytes transferred: %d\n",
- mmc_hostname(host),
- mrq->data->bytes_xfered, mrq->data->error);
- }
-
- if (mrq->stop) {
- pr_debug("%s: (CMD%u): %d: %08x %08x %08x %08x\n",
- mmc_hostname(host), mrq->stop->opcode,
- mrq->stop->error,
- mrq->stop->resp[0], mrq->stop->resp[1],
- mrq->stop->resp[2], mrq->stop->resp[3]);
- }
-
if (mrq->done)
mrq->done(mrq);
}
@@ -236,31 +209,6 @@ static int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
if (mmc_card_removed(host->card))
return -ENOMEDIUM;
- if (mrq->sbc) {
- pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n",
- mmc_hostname(host), mrq->sbc->opcode,
- mrq->sbc->arg, mrq->sbc->flags);
- }
-
- pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
- mmc_hostname(host), mrq->cmd->opcode,
- mrq->cmd->arg, mrq->cmd->flags);
-
- if (mrq->data) {
- pr_debug("%s: blksz %d blocks %d flags %08x "
- "tsac %d ms nsac %d\n",
- mmc_hostname(host), mrq->data->blksz,
- mrq->data->blocks, mrq->data->flags,
- mrq->data->timeout_ns / 1000000,
- mrq->data->timeout_clks);
- }
-
- if (mrq->stop) {
- pr_debug("%s: CMD%u arg %08x flags %08x\n",
- mmc_hostname(host), mrq->stop->opcode,
- mrq->stop->arg, mrq->stop->flags);
- }
-
WARN_ON(!host->claimed);
mrq->cmd->error = 0;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] mmc: Remove some redundant debug prints
2016-04-06 11:38 [PATCH] mmc: Remove some redundant debug prints Baolin Wang
@ 2016-04-06 11:57 ` Jisheng Zhang
2016-04-07 1:40 ` Jaehoon Chung
2016-04-07 3:13 ` Baolin Wang
0 siblings, 2 replies; 5+ messages in thread
From: Jisheng Zhang @ 2016-04-06 11:57 UTC (permalink / raw)
To: Baolin Wang
Cc: ulf.hansson, adrian.hunter, rmk+kernel, shawn.lin, dianders,
david, broonie, linus.walleij, takahiro.akashi, linux-kernel,
linux-mmc
On Wed, 6 Apr 2016 19:38:30 +0800 Baolin Wang wrote:
> This patch removes some redundant debug prints, since we have added some
> tracepoints to help with performance analysis of MMC subsystem.
I think the debug prints you removed are useful for debugging mmc err, how is
this purpose achieved by tracepoints? From another side, why should I enable
tracepoints to debug mmc err?
Thanks
>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---
> drivers/mmc/core/core.c | 52 -----------------------------------------------
> 1 file changed, 52 deletions(-)
>
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index f80b3ab..3f1362a 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -157,33 +157,6 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
>
> led_trigger_event(host->led, LED_OFF);
>
> - if (mrq->sbc) {
> - pr_debug("%s: req done <CMD%u>: %d: %08x %08x %08x %08x\n",
> - mmc_hostname(host), mrq->sbc->opcode,
> - mrq->sbc->error,
> - mrq->sbc->resp[0], mrq->sbc->resp[1],
> - mrq->sbc->resp[2], mrq->sbc->resp[3]);
> - }
> -
> - pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
> - mmc_hostname(host), cmd->opcode, err,
> - cmd->resp[0], cmd->resp[1],
> - cmd->resp[2], cmd->resp[3]);
> -
> - if (mrq->data) {
> - pr_debug("%s: %d bytes transferred: %d\n",
> - mmc_hostname(host),
> - mrq->data->bytes_xfered, mrq->data->error);
> - }
> -
> - if (mrq->stop) {
> - pr_debug("%s: (CMD%u): %d: %08x %08x %08x %08x\n",
> - mmc_hostname(host), mrq->stop->opcode,
> - mrq->stop->error,
> - mrq->stop->resp[0], mrq->stop->resp[1],
> - mrq->stop->resp[2], mrq->stop->resp[3]);
> - }
> -
> if (mrq->done)
> mrq->done(mrq);
> }
> @@ -236,31 +209,6 @@ static int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
> if (mmc_card_removed(host->card))
> return -ENOMEDIUM;
>
> - if (mrq->sbc) {
> - pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n",
> - mmc_hostname(host), mrq->sbc->opcode,
> - mrq->sbc->arg, mrq->sbc->flags);
> - }
> -
> - pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
> - mmc_hostname(host), mrq->cmd->opcode,
> - mrq->cmd->arg, mrq->cmd->flags);
> -
> - if (mrq->data) {
> - pr_debug("%s: blksz %d blocks %d flags %08x "
> - "tsac %d ms nsac %d\n",
> - mmc_hostname(host), mrq->data->blksz,
> - mrq->data->blocks, mrq->data->flags,
> - mrq->data->timeout_ns / 1000000,
> - mrq->data->timeout_clks);
> - }
> -
> - if (mrq->stop) {
> - pr_debug("%s: CMD%u arg %08x flags %08x\n",
> - mmc_hostname(host), mrq->stop->opcode,
> - mrq->stop->arg, mrq->stop->flags);
> - }
> -
> WARN_ON(!host->claimed);
>
> mrq->cmd->error = 0;
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] mmc: Remove some redundant debug prints
2016-04-06 11:57 ` Jisheng Zhang
@ 2016-04-07 1:40 ` Jaehoon Chung
2016-04-07 3:15 ` Baolin Wang
2016-04-07 3:13 ` Baolin Wang
1 sibling, 1 reply; 5+ messages in thread
From: Jaehoon Chung @ 2016-04-07 1:40 UTC (permalink / raw)
To: Jisheng Zhang, Baolin Wang
Cc: ulf.hansson, adrian.hunter, rmk+kernel, shawn.lin, dianders,
david, broonie, linus.walleij, takahiro.akashi, linux-kernel,
linux-mmc
On 04/06/2016 08:57 PM, Jisheng Zhang wrote:
>
>
> On Wed, 6 Apr 2016 19:38:30 +0800 Baolin Wang wrote:
>
>> This patch removes some redundant debug prints, since we have added some
>> tracepoints to help with performance analysis of MMC subsystem.
>
> I think the debug prints you removed are useful for debugging mmc err, how is
> this purpose achieved by tracepoints? From another side, why should I enable
> tracepoints to debug mmc err?
I agreed Jisheng's opinion. tracepoint is helpful for analyzing performance and debugging something.
But I think it's more easier to check the mmc error at booting time or some time.
Best Regards,
Jaehoon Chung
>
> Thanks
>
>>
>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
>> ---
>> drivers/mmc/core/core.c | 52 -----------------------------------------------
>> 1 file changed, 52 deletions(-)
>>
>> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
>> index f80b3ab..3f1362a 100644
>> --- a/drivers/mmc/core/core.c
>> +++ b/drivers/mmc/core/core.c
>> @@ -157,33 +157,6 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
>>
>> led_trigger_event(host->led, LED_OFF);
>>
>> - if (mrq->sbc) {
>> - pr_debug("%s: req done <CMD%u>: %d: %08x %08x %08x %08x\n",
>> - mmc_hostname(host), mrq->sbc->opcode,
>> - mrq->sbc->error,
>> - mrq->sbc->resp[0], mrq->sbc->resp[1],
>> - mrq->sbc->resp[2], mrq->sbc->resp[3]);
>> - }
>> -
>> - pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
>> - mmc_hostname(host), cmd->opcode, err,
>> - cmd->resp[0], cmd->resp[1],
>> - cmd->resp[2], cmd->resp[3]);
>> -
>> - if (mrq->data) {
>> - pr_debug("%s: %d bytes transferred: %d\n",
>> - mmc_hostname(host),
>> - mrq->data->bytes_xfered, mrq->data->error);
>> - }
>> -
>> - if (mrq->stop) {
>> - pr_debug("%s: (CMD%u): %d: %08x %08x %08x %08x\n",
>> - mmc_hostname(host), mrq->stop->opcode,
>> - mrq->stop->error,
>> - mrq->stop->resp[0], mrq->stop->resp[1],
>> - mrq->stop->resp[2], mrq->stop->resp[3]);
>> - }
>> -
>> if (mrq->done)
>> mrq->done(mrq);
>> }
>> @@ -236,31 +209,6 @@ static int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
>> if (mmc_card_removed(host->card))
>> return -ENOMEDIUM;
>>
>> - if (mrq->sbc) {
>> - pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n",
>> - mmc_hostname(host), mrq->sbc->opcode,
>> - mrq->sbc->arg, mrq->sbc->flags);
>> - }
>> -
>> - pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
>> - mmc_hostname(host), mrq->cmd->opcode,
>> - mrq->cmd->arg, mrq->cmd->flags);
>> -
>> - if (mrq->data) {
>> - pr_debug("%s: blksz %d blocks %d flags %08x "
>> - "tsac %d ms nsac %d\n",
>> - mmc_hostname(host), mrq->data->blksz,
>> - mrq->data->blocks, mrq->data->flags,
>> - mrq->data->timeout_ns / 1000000,
>> - mrq->data->timeout_clks);
>> - }
>> -
>> - if (mrq->stop) {
>> - pr_debug("%s: CMD%u arg %08x flags %08x\n",
>> - mmc_hostname(host), mrq->stop->opcode,
>> - mrq->stop->arg, mrq->stop->flags);
>> - }
>> -
>> WARN_ON(!host->claimed);
>>
>> mrq->cmd->error = 0;
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] mmc: Remove some redundant debug prints
2016-04-07 1:40 ` Jaehoon Chung
@ 2016-04-07 3:15 ` Baolin Wang
0 siblings, 0 replies; 5+ messages in thread
From: Baolin Wang @ 2016-04-07 3:15 UTC (permalink / raw)
To: Jaehoon Chung
Cc: Jisheng Zhang, Ulf Hansson, Adrian Hunter, rmk+kernel, Shawn Lin,
Douglas Anderson, David Jander, Mark Brown, Linus Walleij,
Takahiro Akashi, LKML, linux-mmc
On 7 April 2016 at 09:40, Jaehoon Chung <jh80.chung@samsung.com> wrote:
> On 04/06/2016 08:57 PM, Jisheng Zhang wrote:
>>
>>
>> On Wed, 6 Apr 2016 19:38:30 +0800 Baolin Wang wrote:
>>
>>> This patch removes some redundant debug prints, since we have added some
>>> tracepoints to help with performance analysis of MMC subsystem.
>>
>> I think the debug prints you removed are useful for debugging mmc err, how is
>> this purpose achieved by tracepoints? From another side, why should I enable
>> tracepoints to debug mmc err?
>
> I agreed Jisheng's opinion. tracepoint is helpful for analyzing performance and debugging something.
> But I think it's more easier to check the mmc error at booting time or some time.
OK. Sounds reasonable.
>
> Best Regards,
> Jaehoon Chung
>
>>
>> Thanks
>>
>>>
>>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
>>> ---
>>> drivers/mmc/core/core.c | 52 -----------------------------------------------
>>> 1 file changed, 52 deletions(-)
>>>
>>> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
>>> index f80b3ab..3f1362a 100644
>>> --- a/drivers/mmc/core/core.c
>>> +++ b/drivers/mmc/core/core.c
>>> @@ -157,33 +157,6 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
>>>
>>> led_trigger_event(host->led, LED_OFF);
>>>
>>> - if (mrq->sbc) {
>>> - pr_debug("%s: req done <CMD%u>: %d: %08x %08x %08x %08x\n",
>>> - mmc_hostname(host), mrq->sbc->opcode,
>>> - mrq->sbc->error,
>>> - mrq->sbc->resp[0], mrq->sbc->resp[1],
>>> - mrq->sbc->resp[2], mrq->sbc->resp[3]);
>>> - }
>>> -
>>> - pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
>>> - mmc_hostname(host), cmd->opcode, err,
>>> - cmd->resp[0], cmd->resp[1],
>>> - cmd->resp[2], cmd->resp[3]);
>>> -
>>> - if (mrq->data) {
>>> - pr_debug("%s: %d bytes transferred: %d\n",
>>> - mmc_hostname(host),
>>> - mrq->data->bytes_xfered, mrq->data->error);
>>> - }
>>> -
>>> - if (mrq->stop) {
>>> - pr_debug("%s: (CMD%u): %d: %08x %08x %08x %08x\n",
>>> - mmc_hostname(host), mrq->stop->opcode,
>>> - mrq->stop->error,
>>> - mrq->stop->resp[0], mrq->stop->resp[1],
>>> - mrq->stop->resp[2], mrq->stop->resp[3]);
>>> - }
>>> -
>>> if (mrq->done)
>>> mrq->done(mrq);
>>> }
>>> @@ -236,31 +209,6 @@ static int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
>>> if (mmc_card_removed(host->card))
>>> return -ENOMEDIUM;
>>>
>>> - if (mrq->sbc) {
>>> - pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n",
>>> - mmc_hostname(host), mrq->sbc->opcode,
>>> - mrq->sbc->arg, mrq->sbc->flags);
>>> - }
>>> -
>>> - pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
>>> - mmc_hostname(host), mrq->cmd->opcode,
>>> - mrq->cmd->arg, mrq->cmd->flags);
>>> -
>>> - if (mrq->data) {
>>> - pr_debug("%s: blksz %d blocks %d flags %08x "
>>> - "tsac %d ms nsac %d\n",
>>> - mmc_hostname(host), mrq->data->blksz,
>>> - mrq->data->blocks, mrq->data->flags,
>>> - mrq->data->timeout_ns / 1000000,
>>> - mrq->data->timeout_clks);
>>> - }
>>> -
>>> - if (mrq->stop) {
>>> - pr_debug("%s: CMD%u arg %08x flags %08x\n",
>>> - mmc_hostname(host), mrq->stop->opcode,
>>> - mrq->stop->arg, mrq->stop->flags);
>>> - }
>>> -
>>> WARN_ON(!host->claimed);
>>>
>>> mrq->cmd->error = 0;
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>>
>
--
Baolin.wang
Best Regards
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] mmc: Remove some redundant debug prints
2016-04-06 11:57 ` Jisheng Zhang
2016-04-07 1:40 ` Jaehoon Chung
@ 2016-04-07 3:13 ` Baolin Wang
1 sibling, 0 replies; 5+ messages in thread
From: Baolin Wang @ 2016-04-07 3:13 UTC (permalink / raw)
To: Jisheng Zhang
Cc: Ulf Hansson, Adrian Hunter, rmk+kernel, Shawn Lin,
Douglas Anderson, David Jander, Mark Brown, Linus Walleij,
Takahiro Akashi, LKML, linux-mmc
On 6 April 2016 at 19:57, Jisheng Zhang <jszhang@marvell.com> wrote:
>
>
> On Wed, 6 Apr 2016 19:38:30 +0800 Baolin Wang wrote:
>
>> This patch removes some redundant debug prints, since we have added some
>> tracepoints to help with performance analysis of MMC subsystem.
>
> I think the debug prints you removed are useful for debugging mmc err, how is
> this purpose achieved by tracepoints? From another side, why should I enable
> tracepoints to debug mmc err?
Tracepoints can show all the debugging mmc information, so I think
these debug prints are redundant. Another point you said, why you
should enable tracepoints to debug mmc? Tracepoints are lightweight
hooks and one simple way to be used for tracing and performance
accounting.
>
> Thanks
>
>>
>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
>> ---
>> drivers/mmc/core/core.c | 52 -----------------------------------------------
>> 1 file changed, 52 deletions(-)
>>
>> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
>> index f80b3ab..3f1362a 100644
>> --- a/drivers/mmc/core/core.c
>> +++ b/drivers/mmc/core/core.c
>> @@ -157,33 +157,6 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
>>
>> led_trigger_event(host->led, LED_OFF);
>>
>> - if (mrq->sbc) {
>> - pr_debug("%s: req done <CMD%u>: %d: %08x %08x %08x %08x\n",
>> - mmc_hostname(host), mrq->sbc->opcode,
>> - mrq->sbc->error,
>> - mrq->sbc->resp[0], mrq->sbc->resp[1],
>> - mrq->sbc->resp[2], mrq->sbc->resp[3]);
>> - }
>> -
>> - pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
>> - mmc_hostname(host), cmd->opcode, err,
>> - cmd->resp[0], cmd->resp[1],
>> - cmd->resp[2], cmd->resp[3]);
>> -
>> - if (mrq->data) {
>> - pr_debug("%s: %d bytes transferred: %d\n",
>> - mmc_hostname(host),
>> - mrq->data->bytes_xfered, mrq->data->error);
>> - }
>> -
>> - if (mrq->stop) {
>> - pr_debug("%s: (CMD%u): %d: %08x %08x %08x %08x\n",
>> - mmc_hostname(host), mrq->stop->opcode,
>> - mrq->stop->error,
>> - mrq->stop->resp[0], mrq->stop->resp[1],
>> - mrq->stop->resp[2], mrq->stop->resp[3]);
>> - }
>> -
>> if (mrq->done)
>> mrq->done(mrq);
>> }
>> @@ -236,31 +209,6 @@ static int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
>> if (mmc_card_removed(host->card))
>> return -ENOMEDIUM;
>>
>> - if (mrq->sbc) {
>> - pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n",
>> - mmc_hostname(host), mrq->sbc->opcode,
>> - mrq->sbc->arg, mrq->sbc->flags);
>> - }
>> -
>> - pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
>> - mmc_hostname(host), mrq->cmd->opcode,
>> - mrq->cmd->arg, mrq->cmd->flags);
>> -
>> - if (mrq->data) {
>> - pr_debug("%s: blksz %d blocks %d flags %08x "
>> - "tsac %d ms nsac %d\n",
>> - mmc_hostname(host), mrq->data->blksz,
>> - mrq->data->blocks, mrq->data->flags,
>> - mrq->data->timeout_ns / 1000000,
>> - mrq->data->timeout_clks);
>> - }
>> -
>> - if (mrq->stop) {
>> - pr_debug("%s: CMD%u arg %08x flags %08x\n",
>> - mmc_hostname(host), mrq->stop->opcode,
>> - mrq->stop->arg, mrq->stop->flags);
>> - }
>> -
>> WARN_ON(!host->claimed);
>>
>> mrq->cmd->error = 0;
>
--
Baolin.wang
Best Regards
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-04-07 3:15 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-04-06 11:38 [PATCH] mmc: Remove some redundant debug prints Baolin Wang
2016-04-06 11:57 ` Jisheng Zhang
2016-04-07 1:40 ` Jaehoon Chung
2016-04-07 3:15 ` Baolin Wang
2016-04-07 3:13 ` Baolin Wang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox