Re: [PATCH 2/2] bmips: add device tree example for BCM6358

[Rob Herring <robh@kernel.org>]

On Sat, Apr 09, 2016 at 12:56:48PM +0200, Álvaro Fernández Rojas wrote:
> This adds a device tree example for SFR Neufbox4 (Sercomm version), which
> also serves as a real example for brcm,bcm6358-leds.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
> ---
>  v5: more device tree improvements
>   - There is just ohci/ehci node.
>   - Avoid using underscores in node names.
>   - Use interrupt-controller for cpu_intc.
>   - Rename uart aliases to serial.
>  v4: Device tree improvements:
>   - Switch to native-endian for syscon.
>   - Switch to bcm6345-l1-intc interrupt controller.
>   - Add ehci and ohci nodes.
>  v3: Device tree fixes
>   - Use interrupt-controller instead of periph_intc.
>   - Use led@# instead of naming the LEDs.
>  v2: Remove led0 alias and use stdout-path only
> 
>  .../devicetree/bindings/mips/brcm/soc.txt          |   2 +-
>  arch/mips/bmips/Kconfig                            |   4 +
>  arch/mips/boot/dts/brcm/Makefile                   |   2 +
>  arch/mips/boot/dts/brcm/bcm6358.dtsi               | 130 +++++++++++++++++++++
>  arch/mips/boot/dts/brcm/bcm96358nb4ser.dts         |  46 ++++++++
>  5 files changed, 183 insertions(+), 1 deletion(-)
>  create mode 100644 arch/mips/boot/dts/brcm/bcm6358.dtsi
>  create mode 100644 arch/mips/boot/dts/brcm/bcm96358nb4ser.dts

Acked-by: Rob Herring <robh@kernel.org>