From: Marc Haber <mh+linux-kernel@zugschlus.de>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: netdev@vger.kernel.org, gabriel.fernandez@linaro.org,
afaerber@suse.de, fschaefer.oss@googlemail.com,
dinh.linux@gmail.com, davem@davemloft.net,
preid@electromag.com.au, rhgadsdon@gmail.com,
linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: Re: [PATCH (net.git) 2/3] Revert "stmmac: Fix 'eth0: No PHY found' regression"
Date: Wed, 13 Apr 2016 17:44:25 +0200 [thread overview]
Message-ID: <20160413154425.GA30954@torres.zugschlus.de> (raw)
In-Reply-To: <1459494436-27386-3-git-send-email-peppe.cavallaro@st.com>
On Fri, Apr 01, 2016 at 09:07:15AM +0200, Giuseppe Cavallaro wrote:
> This reverts commit 88f8b1bb41c6208f81b6a480244533ded7b59493.
> due to problems on GeekBox and Banana Pi M1 board when
> connected to a real transceiver instead of a switch via
> fixed-link.
This reversal is still needed in Linux 4.5.1 on Banana Pi.
Please consider including it in Linux 4.5.2.
Greetings
Marc
>
> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
> Cc: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> Cc: Andreas Färber <afaerber@suse.de>
> Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
> Cc: Dinh Nguyen <dinh.linux@gmail.com>
> Cc: David S. Miller <davem@davemloft.net>
> ---
> drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 11 ++++++++++-
> .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 9 +--------
> include/linux/stmmac.h | 1 -
> 3 files changed, 11 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> index ea76129..af09ced 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> @@ -199,12 +199,21 @@ int stmmac_mdio_register(struct net_device *ndev)
> struct stmmac_priv *priv = netdev_priv(ndev);
> struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
> int addr, found;
> - struct device_node *mdio_node = priv->plat->mdio_node;
> + struct device_node *mdio_node = NULL;
> + struct device_node *child_node = NULL;
>
> if (!mdio_bus_data)
> return 0;
>
> if (IS_ENABLED(CONFIG_OF)) {
> + for_each_child_of_node(priv->device->of_node, child_node) {
> + if (of_device_is_compatible(child_node,
> + "snps,dwmac-mdio")) {
> + mdio_node = child_node;
> + break;
> + }
> + }
> +
> if (mdio_node) {
> netdev_dbg(ndev, "FOUND MDIO subnode\n");
> } else {
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> index dcbd2a1..9cf181f 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> @@ -146,7 +146,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
> struct device_node *np = pdev->dev.of_node;
> struct plat_stmmacenet_data *plat;
> struct stmmac_dma_cfg *dma_cfg;
> - struct device_node *child_node = NULL;
>
> plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
> if (!plat)
> @@ -177,19 +176,13 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
> plat->phy_node = of_node_get(np);
> }
>
> - for_each_child_of_node(np, child_node)
> - if (of_device_is_compatible(child_node, "snps,dwmac-mdio")) {
> - plat->mdio_node = child_node;
> - break;
> - }
> -
> /* "snps,phy-addr" is not a standard property. Mark it as deprecated
> * and warn of its use. Remove this when phy node support is added.
> */
> if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
> dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
>
> - if ((plat->phy_node && !of_phy_is_fixed_link(np)) || !plat->mdio_node)
> + if ((plat->phy_node && !of_phy_is_fixed_link(np)) || plat->phy_bus_name)
> plat->mdio_bus_data = NULL;
> else
> plat->mdio_bus_data =
> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> index 4bcf5a6..6e53fa8 100644
> --- a/include/linux/stmmac.h
> +++ b/include/linux/stmmac.h
> @@ -114,7 +114,6 @@ struct plat_stmmacenet_data {
> int interface;
> struct stmmac_mdio_bus_data *mdio_bus_data;
> struct device_node *phy_node;
> - struct device_node *mdio_node;
> struct stmmac_dma_cfg *dma_cfg;
> int clk_csr;
> int has_gmac;
> --
> 1.7.4.4
>
--
-----------------------------------------------------------------------------
Marc Haber | "I don't trust Computers. They | Mailadresse im Header
Leimen, Germany | lose things." Winona Ryder | Fon: *49 6224 1600402
Nordisch by Nature | How to make an American Quilt | Fax: *49 6224 1600421
next prev parent reply other threads:[~2016-04-13 15:44 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-01 7:07 [PATCH (net.git) 0/3] stmmac MDIO and normal descr fixes Giuseppe Cavallaro
2016-04-01 7:07 ` [PATCH (net.git) 1/3] stmmac: fix TX normal DESC Giuseppe Cavallaro
2016-04-01 7:07 ` [PATCH (net.git) 2/3] Revert "stmmac: Fix 'eth0: No PHY found' regression" Giuseppe Cavallaro
2016-04-13 15:44 ` Marc Haber [this message]
2016-05-11 18:33 ` Marc Haber
2016-04-01 7:07 ` [PATCH (net.git) 3/3] stmmac: fix MDIO settings Giuseppe Cavallaro
2016-04-01 18:39 ` [PATCH (net.git) 0/3] stmmac MDIO and normal descr fixes David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160413154425.GA30954@torres.zugschlus.de \
--to=mh+linux-kernel@zugschlus.de \
--cc=afaerber@suse.de \
--cc=davem@davemloft.net \
--cc=dinh.linux@gmail.com \
--cc=fschaefer.oss@googlemail.com \
--cc=gabriel.fernandez@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=preid@electromag.com.au \
--cc=rhgadsdon@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox