From: Johan Hovold <johan@kernel.org>
To: Grigori Goronzy <greg@chown.ath.cx>
Cc: Johan Hovold <johan@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 09/13] USB: ch341: fix coding style
Date: Fri, 29 Apr 2016 15:29:56 +0200 [thread overview]
Message-ID: <20160429132956.GM22229@localhost> (raw)
In-Reply-To: <1460754856-27908-10-git-send-email-greg@chown.ath.cx>
On Fri, Apr 15, 2016 at 11:14:12PM +0200, Grigori Goronzy wrote:
> No functional change. The following adjustments were made to be more in
> line with official coding style and to be more consistent.
>
> Stop mixing tabs and spaces for alignment. Stop putting labels and
> statements into the same line. Use braces consistently for a single
> statement.
>
> v2: drop most changes, particularly indentation changes.
>
> Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>
> ---
> drivers/usb/serial/ch341.c | 18 +++++++++++-------
> 1 file changed, 11 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
> index 7ca21a1..f524aa9 100644
> --- a/drivers/usb/serial/ch341.c
> +++ b/drivers/usb/serial/ch341.c
> @@ -133,7 +133,7 @@ static int ch341_control_in(struct usb_device *dev,
> }
>
> static int ch341_init_set_baudrate(struct usb_device *dev,
> - struct ch341_private *priv, unsigned ctrl)
> + struct ch341_private *priv, unsigned ctrl)
This could go into the patch that renamed the function.
> {
> short a;
> int r;
> @@ -187,10 +187,12 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
> spin_lock_irqsave(&priv->lock, flags);
> priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
> spin_unlock_irqrestore(&priv->lock, flags);
> - } else
> + } else {
> r = -EPROTO;
> + }
>
> -out: kfree(buffer);
> +out:
> + kfree(buffer);
> return r;
> }
>
> @@ -241,7 +243,8 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
> /* expect 0x9f 0xee */
> r = ch341_get_status(dev, priv);
>
> -out: kfree(buffer);
> +out:
> + kfree(buffer);
> return r;
> }
>
> @@ -265,7 +268,8 @@ static int ch341_port_probe(struct usb_serial_port *port)
> usb_set_serial_port_data(port, priv);
> return 0;
>
> -error: kfree(priv);
> +error:
> + kfree(priv);
> return r;
> }
>
> @@ -479,7 +483,7 @@ static int ch341_tiocmset(struct tty_struct *tty,
> }
>
> static void ch341_update_line_status(struct usb_serial_port *port,
> - unsigned char *data, size_t len)
> + unsigned char *data, size_t len)
This chunk isn't really needed (and is inconsistent with your commit
message).
> {
> struct ch341_private *priv = usb_get_serial_port_data(port);
> struct tty_struct *tty;
> @@ -600,7 +604,7 @@ static struct usb_serial_driver ch341_device = {
> .id_table = id_table,
> .num_ports = 1,
> .open = ch341_open,
> - .dtr_rts = ch341_dtr_rts,
> + .dtr_rts = ch341_dtr_rts,
How about fixing all the entries to use only tabs to align the RHS
instead?
> .carrier_raised = ch341_carrier_raised,
> .close = ch341_close,
> .set_termios = ch341_set_termios,
Thanks,
Johan
next prev parent reply other threads:[~2016-04-29 13:29 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-15 21:14 Major improvements to the ch341 driver v4 Grigori Goronzy
2016-04-15 21:14 ` [PATCH v4 01/13] USB: ch341: fix error handling on resume Grigori Goronzy
2016-04-29 12:16 ` Johan Hovold
2016-04-29 15:11 ` Grigori Goronzy
2016-05-02 13:45 ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 02/13] USB: ch341: add LCR register definitions Grigori Goronzy
2016-04-29 12:18 ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 03/13] USB: ch341: add definitions for modem control Grigori Goronzy
2016-04-29 12:22 ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 04/13] USB: ch341: fix USB buffer allocations Grigori Goronzy
2016-04-29 12:52 ` Johan Hovold
2016-04-29 15:12 ` Grigori Goronzy
2016-04-15 21:14 ` [PATCH v4 05/13] USB: ch341: reinitialize chip on reconfiguration Grigori Goronzy
2016-04-29 13:03 ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 06/13] USB: ch341: add support for parity, frame length, stop bits Grigori Goronzy
2016-04-29 13:11 ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 07/13] USB: ch341: add debug output for chip version Grigori Goronzy
2016-04-29 13:13 ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 08/13] USB: ch341: add support for RTS/CTS flow control Grigori Goronzy
2016-04-29 13:23 ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 09/13] USB: ch341: fix coding style Grigori Goronzy
2016-04-29 13:29 ` Johan Hovold [this message]
2016-04-15 21:14 ` [PATCH v4 10/13] USB: ch341: clean up messages Grigori Goronzy
2016-04-29 13:40 ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 11/13] USB: ch341: improve B0 handling Grigori Goronzy
2016-04-29 13:41 ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 12/13] USB: ch341: get rid of default configuration Grigori Goronzy
2016-04-29 13:43 ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 13/13] USB: ch341: implement tx_empty callback Grigori Goronzy
2016-04-29 13:47 ` Johan Hovold
2016-04-28 23:24 ` Major improvements to the ch341 driver v4 Grigori Goronzy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160429132956.GM22229@localhost \
--to=johan@kernel.org \
--cc=greg@chown.ath.cx \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox