From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Keerthy <j-keerthy@ti.com>,
Tony Lindgren <tony@atomide.com>,
Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH 3.14 13/37] pinctrl: single: Fix pcs_parse_bits_in_pinctrl_entry to use __ffs than ffs
Date: Mon, 2 May 2016 17:12:02 -0700 [thread overview]
Message-ID: <20160503000423.996277165@linuxfoundation.org> (raw)
In-Reply-To: <20160503000423.577563140@linuxfoundation.org>
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Keerthy <j-keerthy@ti.com>
commit 56b367c0cd67d4c3006738e7dc9dda9273fd2bfe upstream.
pcs_parse_bits_in_pinctrl_entry uses ffs which gives bit indices
ranging from 1 to MAX. This leads to a corner case where we try to request
the pin number = MAX and fails.
bit_pos value is being calculted using ffs. pin_num_from_lsb uses
bit_pos value. pins array is populated with:
pin + pin_num_from_lsb.
The above is 1 more than usual bit indices as bit_pos uses ffs to compute
first set bit. Hence the last of the pins array is populated with the MAX
value and not MAX - 1 which causes error when we call pin_request.
mask_pos is rightly calculated as ((pcs->fmask) << (bit_pos - 1))
Consequently val_pos and submask are correct.
Hence use __ffs which gives (ffs(x) - 1) as the first bit set.
fixes: 4e7e8017a8 ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pinctrl/pinctrl-single.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -1313,9 +1313,9 @@ static int pcs_parse_bits_in_pinctrl_ent
/* Parse pins in each row from LSB */
while (mask) {
- bit_pos = ffs(mask);
+ bit_pos = __ffs(mask);
pin_num_from_lsb = bit_pos / pcs->bits_per_pin;
- mask_pos = ((pcs->fmask) << (bit_pos - 1));
+ mask_pos = ((pcs->fmask) << bit_pos);
val_pos = val & mask_pos;
submask = mask & mask_pos;
@@ -1892,7 +1892,7 @@ static int pcs_probe(struct platform_dev
ret = of_property_read_u32(np, "pinctrl-single,function-mask",
&pcs->fmask);
if (!ret) {
- pcs->fshift = ffs(pcs->fmask) - 1;
+ pcs->fshift = __ffs(pcs->fmask);
pcs->fmax = pcs->fmask >> pcs->fshift;
} else {
/* If mask property doesn't exist, function mux is invalid. */
next prev parent reply other threads:[~2016-05-03 2:00 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-03 0:11 [PATCH 3.14 00/37] 3.14.68-stable review Greg Kroah-Hartman
2016-05-03 0:11 ` [PATCH 3.14 01/37] ARM: OMAP2+: hwmod: Fix updating of sysconfig register Greg Kroah-Hartman
2016-05-03 0:11 ` [PATCH 3.14 02/37] assoc_array: dont call compare_object() on a node Greg Kroah-Hartman
2016-05-03 0:11 ` [PATCH 3.14 03/37] usb: xhci: fix wild pointers in xhci_mem_cleanup Greg Kroah-Hartman
2016-05-03 0:11 ` [PATCH 3.14 04/37] usb: hcd: out of bounds access in for_each_companion Greg Kroah-Hartman
2016-05-03 0:11 ` [PATCH 3.14 05/37] lib: lz4: fixed zram with lz4 on big endian machines Greg Kroah-Hartman
2016-05-03 0:11 ` [PATCH 3.14 06/37] x86/iopl/64: Properly context-switch IOPL on Xen PV Greg Kroah-Hartman
2016-05-03 0:11 ` [PATCH 3.14 07/37] futex: Acknowledge a new waiter in counter before plist Greg Kroah-Hartman
2016-05-03 0:11 ` [PATCH 3.14 08/37] drm/qxl: fix cursor position with non-zero hotspot Greg Kroah-Hartman
2016-05-03 0:11 ` [PATCH 3.14 09/37] crypto: ccp - Prevent information leakage on export Greg Kroah-Hartman
2016-05-03 0:11 ` [PATCH 3.14 10/37] crypto: gcm - Fix rfc4543 decryption crash Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 11/37] nl80211: check netlink protocol in socket release notification Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 12/37] Input: gtco - fix crash on detecting device without endpoints Greg Kroah-Hartman
2016-05-03 0:12 ` Greg Kroah-Hartman [this message]
2016-05-03 0:12 ` [PATCH 3.14 14/37] i2c: cpm: Fix build break due to incompatible pointer types Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 15/37] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 16/37] EDAC: i7core, sb_edac: Dont return NOTIFY_BAD from mce_decoder callback Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 17/37] ASoC: s3c24xx: use const snd_soc_component_driver pointer Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 18/37] ASoC: rt5640: Correct the digital interface data select Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 19/37] efi: Fix out-of-bounds read in variable_matches() Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 20/37] workqueue: fix ghost PENDING flag while doing MQ IO Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 21/37] USB: usbip: fix potential out-of-bounds write Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 22/37] paride: make verbose parameter an int again Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 23/37] fbdev: da8xx-fb: fix videomodes of lcd panels Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 24/37] misc/bmp085: Enable building as a module Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 25/37] rtc: hym8563: fix invalid year calculation Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 27/37] drivers/misc/ad525x_dpot: AD5274 fix RDAC read back errors Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 28/37] ext4: fix NULL pointer dereference in ext4_mark_inode_dirty() Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 29/37] serial: sh-sci: Remove cpufreq notifier to fix crash/deadlock Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 30/37] include/linux/poison.h: fix LIST_POISON{1,2} offset Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 31/37] Drivers: hv: vmbus: prevent cpu offlining on newer hypervisors Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 32/37] perf stat: Document --detailed option Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 34/37] bus: imx-weim: Take the status property value into account Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 35/37] jme: Do not enable NIC WoL functions on S0 Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 36/37] jme: Fix device PM wakeup API usage Greg Kroah-Hartman
2016-05-03 0:12 ` [PATCH 3.14 37/37] sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race Greg Kroah-Hartman
2016-05-03 7:19 ` [PATCH 3.14 00/37] 3.14.68-stable review Guenter Roeck
2016-05-03 18:21 ` Greg Kroah-Hartman
2016-05-03 15:00 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160503000423.996277165@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=j-keerthy@ti.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox