From: Lee Jones <lee.jones@linaro.org>
To: Lu Baolu <baolu.lu@linux.intel.com>
Cc: felipe.balbi@linux.intel.com,
Mathias Nyman <mathias.nyman@intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v8 5/7] mfd: intel_vuport: Add Intel virtual USB port MFD Driver
Date: Mon, 9 May 2016 15:26:30 +0100 [thread overview]
Message-ID: <20160509142630.GJ8324@dell> (raw)
In-Reply-To: <1462426383-3949-6-git-send-email-baolu.lu@linux.intel.com>
On Thu, 05 May 2016, Lu Baolu wrote:
> Some Intel platforms have an USB port mux controlled by GPIOs.
> There's a single ACPI platform device that provides 1) USB ID
> extcon device; 2) USB vbus regulator device; and 3) USB port
> switch device. This MFD driver will split these 3 devices for
> their respective drivers.
>
> [baolu: removed .owner per platform_no_drv_owner.cocci]
> Suggested-by: David Cohen <david.a.cohen@linux.intel.com>
> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
> Reviewed-by: Felipe Balbi <balbi@kernel.org>
> ---
> drivers/mfd/Kconfig | 8 +++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/intel-vuport.c | 89 ++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 98 insertions(+)
> create mode 100644 drivers/mfd/intel-vuport.c
Acked-by: Lee Jones <lee.jones@linaro.org>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index eea61e3..7e115ab 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1578,5 +1578,13 @@ config MFD_VEXPRESS_SYSREG
> System Registers are the platform configuration block
> on the ARM Ltd. Versatile Express board.
>
> +config MFD_INTEL_VUPORT
> + tristate "Intel virtual USB port controller"
> + select MFD_CORE
> + depends on X86 && ACPI
> + help
> + Say Y here to enable support for Intel's dual role port mux
> + controlled by GPIOs.
> +
> endmenu
> endif
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 5eaa6465d..65b0518 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -203,3 +203,4 @@ intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
> intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o
> obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
> obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
> +obj-$(CONFIG_MFD_INTEL_VUPORT) += intel-vuport.o
> diff --git a/drivers/mfd/intel-vuport.c b/drivers/mfd/intel-vuport.c
> new file mode 100644
> index 0000000..fa84ed7
> --- /dev/null
> +++ b/drivers/mfd/intel-vuport.c
> @@ -0,0 +1,89 @@
> +/*
> + * MFD driver for Intel virtual USB port
> + *
> + * Copyright(c) 2016 Intel Corporation.
> + * Author: Lu Baolu <baolu.lu@linux.intel.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/gpio.h>
> +#include <linux/mfd/core.h>
> +#include <linux/property.h>
> +#include <linux/platform_device.h>
> +
> +/* ACPI GPIO Mappings */
> +static const struct acpi_gpio_params id_gpio = { 0, 0, false };
> +static const struct acpi_gpio_params vbus_gpio = { 1, 0, false };
> +static const struct acpi_gpio_params mux_gpio = { 2, 0, false };
> +static const struct acpi_gpio_mapping acpi_usb_gpios[] = {
> + { "id-gpios", &id_gpio, 1 },
> + { "gpio-gpios", &vbus_gpio, 1 },
> + { "usb_mux-gpios", &mux_gpio, 1 },
> + { },
> +};
> +
> +static struct property_entry reg_properties[] = {
> + PROPERTY_ENTRY_STRING("supply-name", "regulator-usb-gpio"),
> + { },
> +};
> +
> +static const struct property_set reg_properties_pset = {
> + .properties = reg_properties,
> +};
> +
> +static const struct mfd_cell intel_vuport_mfd_cells[] = {
> + { .name = "extcon-usb-gpio", },
> + {
> + .name = "reg-fixed-voltage",
> + .pset = ®_properties_pset,
> + },
> + { .name = "intel-mux-gpio", },
> +};
> +
> +static int vuport_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + int ret;
> +
> + ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), acpi_usb_gpios);
> + if (ret)
> + return ret;
> +
> + return mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
> + intel_vuport_mfd_cells,
> + ARRAY_SIZE(intel_vuport_mfd_cells), NULL, 0,
> + NULL);
> +}
> +
> +static int vuport_remove(struct platform_device *pdev)
> +{
> + mfd_remove_devices(&pdev->dev);
> + acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pdev->dev));
> +
> + return 0;
> +}
> +
> +static struct acpi_device_id vuport_acpi_match[] = {
> + { "INT3496" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(acpi, vuport_acpi_match);
> +
> +static struct platform_driver vuport_driver = {
> + .driver = {
> + .name = "intel-vuport",
> + .acpi_match_table = ACPI_PTR(vuport_acpi_match),
> + },
> + .probe = vuport_probe,
> + .remove = vuport_remove,
> +};
> +
> +module_platform_driver(vuport_driver);
> +
> +MODULE_AUTHOR("Lu Baolu <baolu.lu@linux.intel.com>");
> +MODULE_DESCRIPTION("Intel virtual USB port");
> +MODULE_LICENSE("GPL v2");
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2016-05-09 14:26 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-05 5:32 [PATCH v8 0/7] usb: add support for Intel dual role port mux Lu Baolu
2016-05-05 5:32 ` [PATCH v8 1/7] regulator: fixed: add support for ACPI interface Lu Baolu
2016-05-13 11:17 ` Mark Brown
2016-05-16 1:00 ` Lu Baolu
2016-05-05 5:32 ` [PATCH v8 2/7] usb: mux: add generic code for dual role port mux Lu Baolu
2016-05-25 11:06 ` Heikki Krogerus
2016-05-26 1:03 ` Lu Baolu
2016-05-27 8:00 ` Heikki Krogerus
2016-05-27 8:07 ` Lu Baolu
2016-05-05 5:32 ` [PATCH v8 3/7] usb: mux: add driver for Intel gpio controlled " Lu Baolu
2016-05-05 5:33 ` [PATCH v8 4/7] usb: mux: add driver for Intel drcfg " Lu Baolu
2016-05-05 5:33 ` [PATCH v8 5/7] mfd: intel_vuport: Add Intel virtual USB port MFD Driver Lu Baolu
2016-05-09 14:26 ` Lee Jones [this message]
2016-05-05 5:33 ` [PATCH v8 6/7] usb: pci-quirks: add Intel USB drcfg mux device Lu Baolu
2016-05-05 5:33 ` [PATCH v8 7/7] MAINTAINERS: add maintainer entry for Intel USB dual role mux drivers Lu Baolu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160509142630.GJ8324@dell \
--to=lee.jones@linaro.org \
--cc=baolu.lu@linux.intel.com \
--cc=broonie@kernel.org \
--cc=felipe.balbi@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox