From: YU Bo <tsu.yubo@gmail.com>
To: Kroah-Hartman <gregkh@linuxfoundation.org>,
Ravichandran <janani.rvchndrn@gmail.com>,
Goyal <bhumirks@gmail.com>, Kaur Chawla <amitoj1606@gmail.com>,
tsu.yubo@gmail.com
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH] Staging: wlan-ng: Fix trailing */ in block comments.
Date: Wed, 11 May 2016 22:29:44 +0800 [thread overview]
Message-ID: <20160511142934.GA1791@debian.debian> (raw)
Fix checkpatch.pl warning:
WARNING: Block comments use a trailing */ on a separate line.
Signed-off-by: Bo Yu <tsu.yubo@gmail.com>
---
drivers/staging/wlan-ng/prism2mib.c | 506 ++++++++++++++++++------------------
1 file changed, 253 insertions(+), 253 deletions(-)
diff --git a/drivers/staging/wlan-ng/prism2mib.c b/drivers/staging/wlan-ng/prism2mib.c
index fe914b1..4dd4cdf 100644
--- a/drivers/staging/wlan-ng/prism2mib.c
+++ b/drivers/staging/wlan-ng/prism2mib.c
@@ -237,25 +237,25 @@ static struct mibrec mibtab[] = {
{0, 0, 0, 0, 0, NULL}
};
-/*----------------------------------------------------------------
-* prism2mgmt_mibset_mibget
-*
-* Set the value of a mib item.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-* interrupt
-----------------------------------------------------------------*/
+/*
+ * prism2mgmt_mibset_mibget
+ *
+ * Set the value of a mib item.
+ *
+ * Arguments:
+ * wlandev wlan device structure
+ * msgp ptr to msg buffer
+ *
+ * Returns:
+ * 0 success and done
+ * <0 success, but we're waiting for something to finish.
+ * >0 an error occurred while handling the message.
+ * Side effects:
+ *
+ * Call context:
+ * process thread (usually)
+ * interrupt
+ */
int prism2mgmt_mibset_mibget(wlandevice_t *wlandev, void *msgp)
{
@@ -346,30 +346,30 @@ done:
return 0;
}
-/*----------------------------------------------------------------
-* prism2mib_bytearea2pstr
-*
-* Get/set pstr data to/from a byte area.
-*
-* MIB record parameters:
-* parm1 Prism2 RID value.
-* parm2 Number of bytes of RID data.
-* parm3 Not used.
-*
-* Arguments:
-* mib MIB record.
-* isget MIBGET/MIBSET flag.
-* wlandev wlan device structure.
-* priv "priv" structure.
-* hw "hw" structure.
-* msg Message structure.
-* data Data buffer.
-*
-* Returns:
-* 0 - Success.
-* ~0 - Error.
-*
-----------------------------------------------------------------*/
+/*
+ * prism2mib_bytearea2pstr
+ *
+ * Get/set pstr data to/from a byte area.
+ *
+ * MIB record parameters:
+ * parm1 Prism2 RID value.
+ * parm2 Number of bytes of RID data.
+ * parm3 Not used.
+ *
+ * Arguments:
+ * mib MIB record.
+ * isget MIBGET/MIBSET flag.
+ * wlandev wlan device structure.
+ * priv "priv" structure.
+ * hw "hw" structure.
+ * msg Message structure.
+ * data Data buffer.
+ *
+ * Returns:
+ * 0 - Success.
+ * ~0 - Error.
+ *
+ */
static int prism2mib_bytearea2pstr(struct mibrec *mib,
int isget,
@@ -396,30 +396,30 @@ static int prism2mib_bytearea2pstr(struct mibrec *mib,
return result;
}
-/*----------------------------------------------------------------
-* prism2mib_uint32
-*
-* Get/set uint32 data.
-*
-* MIB record parameters:
-* parm1 Prism2 RID value.
-* parm2 Not used.
-* parm3 Not used.
-*
-* Arguments:
-* mib MIB record.
-* isget MIBGET/MIBSET flag.
-* wlandev wlan device structure.
-* priv "priv" structure.
-* hw "hw" structure.
-* msg Message structure.
-* data Data buffer.
-*
-* Returns:
-* 0 - Success.
-* ~0 - Error.
-*
-----------------------------------------------------------------*/
+/*
+ * prism2mib_uint32
+ *
+ * Get/set uint32 data.
+ *
+ * MIB record parameters:
+ * parm1 Prism2 RID value.
+ * parm2 Not used.
+ * parm3 Not used.
+ *
+ * Arguments:
+ * mib MIB record.
+ * isget MIBGET/MIBSET flag.
+ * wlandev wlan device structure.
+ * priv "priv" structure.
+ * hw "hw" structure.
+ * msg Message structure.
+ * data Data buffer.
+ *
+ * Returns:
+ * 0 - Success.
+ * ~0 - Error.
+ *
+ */
static int prism2mib_uint32(struct mibrec *mib,
int isget,
@@ -443,30 +443,30 @@ static int prism2mib_uint32(struct mibrec *mib,
return result;
}
-/*----------------------------------------------------------------
-* prism2mib_flag
-*
-* Get/set a flag.
-*
-* MIB record parameters:
-* parm1 Prism2 RID value.
-* parm2 Bit to get/set.
-* parm3 Not used.
-*
-* Arguments:
-* mib MIB record.
-* isget MIBGET/MIBSET flag.
-* wlandev wlan device structure.
-* priv "priv" structure.
-* hw "hw" structure.
-* msg Message structure.
-* data Data buffer.
-*
-* Returns:
-* 0 - Success.
-* ~0 - Error.
-*
-----------------------------------------------------------------*/
+/*
+ * prism2mib_flag
+ *
+ * Get/set a flag.
+ *
+ * MIB record parameters:
+ * parm1 Prism2 RID value.
+ * parm2 Bit to get/set.
+ * parm3 Not used.
+ *
+ * Arguments:
+ * mib MIB record.
+ * isget MIBGET/MIBSET flag.
+ * wlandev wlan device structure.
+ * priv "priv" structure.
+ * hw "hw" structure.
+ * msg Message structure.
+ * data Data buffer.
+ *
+ * Returns:
+ * 0 - Success.
+ * ~0 - Error.
+ *
+ */
static int prism2mib_flag(struct mibrec *mib,
int isget,
@@ -500,30 +500,30 @@ static int prism2mib_flag(struct mibrec *mib,
return result;
}
-/*----------------------------------------------------------------
-* prism2mib_wepdefaultkey
-*
-* Get/set WEP default keys.
-*
-* MIB record parameters:
-* parm1 Prism2 RID value.
-* parm2 Number of bytes of RID data.
-* parm3 Not used.
-*
-* Arguments:
-* mib MIB record.
-* isget MIBGET/MIBSET flag.
-* wlandev wlan device structure.
-* priv "priv" structure.
-* hw "hw" structure.
-* msg Message structure.
-* data Data buffer.
-*
-* Returns:
-* 0 - Success.
-* ~0 - Error.
-*
-----------------------------------------------------------------*/
+/*
+ * prism2mib_wepdefaultkey
+ *
+ * Get/set WEP default keys.
+ *
+ * MIB record parameters:
+ * parm1 Prism2 RID value.
+ * parm2 Number of bytes of RID data.
+ * parm3 Not used.
+ *
+ * Arguments:
+ * mib MIB record.
+ * isget MIBGET/MIBSET flag.
+ * wlandev wlan device structure.
+ * priv "priv" structure.
+ * hw "hw" structure.
+ * msg Message structure.
+ * data Data buffer.
+ *
+ * Returns:
+ * 0 - Success.
+ * ~0 - Error.
+ *
+ */
static int prism2mib_wepdefaultkey(struct mibrec *mib,
int isget,
@@ -550,30 +550,30 @@ static int prism2mib_wepdefaultkey(struct mibrec *mib,
return result;
}
-/*----------------------------------------------------------------
-* prism2mib_privacyinvoked
-*
-* Get/set the dot11PrivacyInvoked value.
-*
-* MIB record parameters:
-* parm1 Prism2 RID value.
-* parm2 Bit value for PrivacyInvoked flag.
-* parm3 Not used.
-*
-* Arguments:
-* mib MIB record.
-* isget MIBGET/MIBSET flag.
-* wlandev wlan device structure.
-* priv "priv" structure.
-* hw "hw" structure.
-* msg Message structure.
-* data Data buffer.
-*
-* Returns:
-* 0 - Success.
-* ~0 - Error.
-*
-----------------------------------------------------------------*/
+/*
+ * prism2mib_privacyinvoked
+ *
+ * Get/set the dot11PrivacyInvoked value.
+ *
+ * MIB record parameters:
+ * parm1 Prism2 RID value.
+ * parm2 Bit value for PrivacyInvoked flag.
+ * parm3 Not used.
+ *
+ * Arguments:
+ * mib MIB record.
+ * isget MIBGET/MIBSET flag.
+ * wlandev wlan device structure.
+ * priv "priv" structure.
+ * hw "hw" structure.
+ * msg Message structure.
+ * data Data buffer.
+ *
+ * Returns:
+ * 0 - Success.
+ * ~0 - Error.
+ *
+ */
static int prism2mib_privacyinvoked(struct mibrec *mib,
int isget,
@@ -592,30 +592,30 @@ static int prism2mib_privacyinvoked(struct mibrec *mib,
return prism2mib_flag(mib, isget, wlandev, hw, msg, data);
}
-/*----------------------------------------------------------------
-* prism2mib_excludeunencrypted
-*
-* Get/set the dot11ExcludeUnencrypted value.
-*
-* MIB record parameters:
-* parm1 Prism2 RID value.
-* parm2 Bit value for ExcludeUnencrypted flag.
-* parm3 Not used.
-*
-* Arguments:
-* mib MIB record.
-* isget MIBGET/MIBSET flag.
-* wlandev wlan device structure.
-* priv "priv" structure.
-* hw "hw" structure.
-* msg Message structure.
-* data Data buffer.
-*
-* Returns:
-* 0 - Success.
-* ~0 - Error.
-*
-----------------------------------------------------------------*/
+/*
+ * prism2mib_excludeunencrypted
+ *
+ * Get/set the dot11ExcludeUnencrypted value.
+ *
+ * MIB record parameters:
+ * parm1 Prism2 RID value.
+ * parm2 Bit value for ExcludeUnencrypted flag.
+ * parm3 Not used.
+ *
+ * Arguments:
+ * mib MIB record.
+ * isget MIBGET/MIBSET flag.
+ * wlandev wlan device structure.
+ * priv "priv" structure.
+ * hw "hw" structure.
+ * msg Message structure.
+ * data Data buffer.
+ *
+ * Returns:
+ * 0 - Success.
+ * ~0 - Error.
+ *
+ */
static int prism2mib_excludeunencrypted(struct mibrec *mib,
int isget,
@@ -628,30 +628,30 @@ static int prism2mib_excludeunencrypted(struct mibrec *mib,
return prism2mib_flag(mib, isget, wlandev, hw, msg, data);
}
-/*----------------------------------------------------------------
-* prism2mib_fragmentationthreshold
-*
-* Get/set the fragmentation threshold.
-*
-* MIB record parameters:
-* parm1 Prism2 RID value.
-* parm2 Not used.
-* parm3 Not used.
-*
-* Arguments:
-* mib MIB record.
-* isget MIBGET/MIBSET flag.
-* wlandev wlan device structure.
-* priv "priv" structure.
-* hw "hw" structure.
-* msg Message structure.
-* data Data buffer.
-*
-* Returns:
-* 0 - Success.
-* ~0 - Error.
-*
-----------------------------------------------------------------*/
+/*
+ * prism2mib_fragmentationthreshold
+ *
+ * Get/set the fragmentation threshold.
+ *
+ * MIB record parameters:
+ * parm1 Prism2 RID value.
+ * parm2 Not used.
+ * parm3 Not used.
+ *
+ * Arguments:
+ * mib MIB record.
+ * isget MIBGET/MIBSET flag.
+ * wlandev wlan device structure.
+ * priv "priv" structure.
+ * hw "hw" structure.
+ * msg Message structure.
+ * data Data buffer.
+ *
+ * Returns:
+ * 0 - Success.
+ * ~0 - Error.
+ *
+ */
static int prism2mib_fragmentationthreshold(struct mibrec *mib,
int isget,
@@ -674,30 +674,30 @@ static int prism2mib_fragmentationthreshold(struct mibrec *mib,
return prism2mib_uint32(mib, isget, wlandev, hw, msg, data);
}
-/*----------------------------------------------------------------
-* prism2mib_priv
-*
-* Get/set values in the "priv" data structure.
-*
-* MIB record parameters:
-* parm1 Not used.
-* parm2 Not used.
-* parm3 Not used.
-*
-* Arguments:
-* mib MIB record.
-* isget MIBGET/MIBSET flag.
-* wlandev wlan device structure.
-* priv "priv" structure.
-* hw "hw" structure.
-* msg Message structure.
-* data Data buffer.
-*
-* Returns:
-* 0 - Success.
-* ~0 - Error.
-*
-----------------------------------------------------------------*/
+/*
+ * prism2mib_priv
+ *
+ * Get/set values in the "priv" data structure.
+ *
+ * MIB record parameters:
+ * parm1 Not used.
+ * parm2 Not used.
+ * parm3 Not used.
+ *
+ * Arguments:
+ * mib MIB record.
+ * isget MIBGET/MIBSET flag.
+ * wlandev wlan device structure.
+ * priv "priv" structure.
+ * hw "hw" structure.
+ * msg Message structure.
+ * data Data buffer.
+ *
+ * Returns:
+ * 0 - Success.
+ * ~0 - Error.
+ *
+ */
static int prism2mib_priv(struct mibrec *mib,
int isget,
@@ -736,20 +736,20 @@ static int prism2mib_priv(struct mibrec *mib,
return 0;
}
-/*----------------------------------------------------------------
-* prism2mgmt_pstr2bytestr
-*
-* Convert the pstr data in the WLAN message structure into an hfa384x
-* byte string format.
-*
-* Arguments:
-* bytestr hfa384x byte string data type
-* pstr wlan message data
-*
-* Returns:
-* Nothing
-*
-----------------------------------------------------------------*/
+/*
+ * prism2mgmt_pstr2bytestr
+ *
+ * Convert the pstr data in the WLAN message structure into an hfa384x
+ * byte string format.
+ *
+ * Arguments:
+ * bytestr hfa384x byte string data type
+ * pstr wlan message data
+ *
+ * Returns:
+ * Nothing
+ *
+ */
void prism2mgmt_pstr2bytestr(struct hfa384x_bytestr *bytestr,
p80211pstrd_t *pstr)
@@ -758,20 +758,20 @@ void prism2mgmt_pstr2bytestr(struct hfa384x_bytestr *bytestr,
memcpy(bytestr->data, pstr->data, pstr->len);
}
-/*----------------------------------------------------------------
-* prism2mgmt_bytestr2pstr
-*
-* Convert the data in an hfa384x byte string format into a
-* pstr in the WLAN message.
-*
-* Arguments:
-* bytestr hfa384x byte string data type
-* msg wlan message
-*
-* Returns:
-* Nothing
-*
-----------------------------------------------------------------*/
+/*
+ * prism2mgmt_bytestr2pstr
+ *
+ * Convert the data in an hfa384x byte string format into a
+ * pstr in the WLAN message.
+ *
+ * Arguments:
+ * bytestr hfa384x byte string data type
+ * msg wlan message
+ *
+ * Returns:
+ * Nothing
+ *
+ */
void prism2mgmt_bytestr2pstr(struct hfa384x_bytestr *bytestr,
p80211pstrd_t *pstr)
@@ -780,20 +780,20 @@ void prism2mgmt_bytestr2pstr(struct hfa384x_bytestr *bytestr,
memcpy(pstr->data, bytestr->data, pstr->len);
}
-/*----------------------------------------------------------------
-* prism2mgmt_bytearea2pstr
-*
-* Convert the data in an hfa384x byte area format into a pstr
-* in the WLAN message.
-*
-* Arguments:
-* bytearea hfa384x byte area data type
-* msg wlan message
-*
-* Returns:
-* Nothing
-*
-----------------------------------------------------------------*/
+/*
+ * prism2mgmt_bytearea2pstr
+ *
+ * Convert the data in an hfa384x byte area format into a pstr
+ * in the WLAN message.
+ *
+ * Arguments:
+ * bytearea hfa384x byte area data type
+ * msg wlan message
+ *
+ * Returns:
+ * Nothing
+ *
+ */
void prism2mgmt_bytearea2pstr(u8 *bytearea, p80211pstrd_t *pstr, int len)
{
--
2.1.4
reply other threads:[~2016-05-11 14:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160511142934.GA1791@debian.debian \
--to=tsu.yubo@gmail.com \
--cc=amitoj1606@gmail.com \
--cc=bhumirks@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=janani.rvchndrn@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).