[PATCH 4.4 59/73] ARM: dts: at91: sam9x5: Fix the memory range assigned to the PMC

Greg Kroah-Hartman
2016-05-17T01:19:25Z

From: Boris Brezillon <boris.brezillon@free-electrons.com>

commit aab0a4c83ceb344d2327194bf354820e50607af6 upstream.

The memory range assigned to the PMC (Power Management Controller) was
not including the PMC_PCR register which are used to control peripheral
clocks.

This was working fine thanks to the page granularity of ioremap(), but
started to fail when we switched to syscon/regmap, because regmap is
making sure that all accesses are falling into the reserved range.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Richard Genoud <richard.genoud@gmail.com>
Tested-by: Richard Genoud <richard.genoud@gmail.com>
Fixes: 863a81c3be1d ("clk: at91: make use of syscon to share PMC registers in several drivers")
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/arm/boot/dts/at91sam9x5.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -106,7 +106,7 @@

pmc: pmc@fffffc00 {
compatible = "atmel,at91sam9x5-pmc", "syscon";
- reg = <0xfffffc00 0x100>;
+ reg = <0xfffffc00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;