* [PATCH] ARM: dts: at91: add at91sam9260ek board DT
@ 2016-05-19 12:54 Nicolas Ferre
2016-05-19 20:00 ` Alexandre Belloni
0 siblings, 1 reply; 2+ messages in thread
From: Nicolas Ferre @ 2016-05-19 12:54 UTC (permalink / raw)
To: linux-arm-kernel, Alexandre Belloni
Cc: Boris BREZILLON, linux-kernel, Jean-Christophe PLAGNIOL-VILLARD,
Nicolas Ferre
Add Device Tree source file for at91sam9260ek board. This official Atmel
Evaluation Kit is designed around a SoC based on a ARM 926 core the
at91sam9260.
The board is also added to the dts Makefile.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
Hi,
This DTS file was sitting in my kernel tree for a long time... So, revived and
updated, here it is as I'm sure it can be useful. Even if the board itself is
pretty old.
Bye,
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91sam9260ek.dts | 211 ++++++++++++++++++++++++++++++++++++
2 files changed, 212 insertions(+)
create mode 100644 arch/arm/boot/dts/at91sam9260ek.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 8f9f1c2ac96b..6893415a53a3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -17,6 +17,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
evk-pro3.dtb \
tny_a9260.dtb \
usb_a9260.dtb \
+ at91sam9260ek.dtb \
at91sam9261ek.dtb \
at91sam9263ek.dtb \
tny_a9263.dtb \
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
new file mode 100644
index 000000000000..43875d18808f
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -0,0 +1,211 @@
+/*
+ * Device Tree file for Atmel at91sam9260 Evaluation Kit
+ *
+ * Copyright (C) 2016 Atmel,
+ * 2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+ model = "Atmel at91sam9260ek";
+ compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9";
+
+ chosen {
+ stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ mmc0: mmc@fffa8000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0_slot1
+ &pinctrl_mmc0_clk
+ &pinctrl_mmc0_slot1_cmd_dat0
+ &pinctrl_mmc0_slot1_dat1_3>;
+ status = "okay";
+ slot@1 {
+ reg = <1>;
+ bus-width = <4>;
+ cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ usart0: serial@fffb0000 {
+ pinctrl-0 =
+ <&pinctrl_usart0
+ &pinctrl_usart0_rts
+ &pinctrl_usart0_cts
+ &pinctrl_usart0_dtr_dsr
+ &pinctrl_usart0_dcd
+ &pinctrl_usart0_ri>;
+ status = "okay";
+ };
+
+ usart1: serial@fffb4000 {
+ status = "okay";
+ };
+
+ ssc0: ssc@fffbc000 {
+ status = "okay";
+ pinctrl-0 = <&pinctrl_ssc0_tx>;
+ };
+
+ macb0: ethernet@fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ spi0: spi@fffc8000 {
+ cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+ mtd_dataflash@0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <50000000>;
+ reg = <1>;
+ };
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ pinctrl@fffff400 {
+ board {
+ pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+ atmel,pins =
+ <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ };
+ };
+
+ shdwc@fffffd10 {
+ atmel,wakeup-counter = <10>;
+ atmel,wakeup-rtt-timer;
+ };
+
+ rtc@fffffd20 {
+ atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+ status = "okay";
+ };
+
+ watchdog@fffffd40 {
+ status = "okay";
+ };
+
+ gpbr: syscon@fffffd50 {
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ btn3 {
+ label = "Button 3";
+ gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+ linux,code = <0x103>;
+ gpio-key,wakeup;
+ };
+
+ btn4 {
+ label = "Button 4";
+ gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+ linux,code = <0x104>;
+ gpio-key,wakeup;
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+
+ 24c512@50 {
+ compatible = "24c512";
+ reg = <0x50>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ ds1 {
+ label = "ds1";
+ gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ ds5 {
+ label = "ds5";
+ gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
--
2.1.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: dts: at91: add at91sam9260ek board DT
2016-05-19 12:54 [PATCH] ARM: dts: at91: add at91sam9260ek board DT Nicolas Ferre
@ 2016-05-19 20:00 ` Alexandre Belloni
0 siblings, 0 replies; 2+ messages in thread
From: Alexandre Belloni @ 2016-05-19 20:00 UTC (permalink / raw)
To: Nicolas Ferre
Cc: linux-arm-kernel, Boris BREZILLON, linux-kernel,
Jean-Christophe PLAGNIOL-VILLARD
On 19/05/2016 at 14:54:22 +0200, Nicolas Ferre wrote :
> Add Device Tree source file for at91sam9260ek board. This official Atmel
> Evaluation Kit is designed around a SoC based on a ARM 926 core the
> at91sam9260.
>
> The board is also added to the dts Makefile.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
> Hi,
>
> This DTS file was sitting in my kernel tree for a long time... So, revived and
> updated, here it is as I'm sure it can be useful. Even if the board itself is
> pretty old.
>
> Bye,
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/at91sam9260ek.dts | 211 ++++++++++++++++++++++++++++++++++++
> 2 files changed, 212 insertions(+)
> create mode 100644 arch/arm/boot/dts/at91sam9260ek.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 8f9f1c2ac96b..6893415a53a3 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -17,6 +17,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
> evk-pro3.dtb \
> tny_a9260.dtb \
> usb_a9260.dtb \
> + at91sam9260ek.dtb \
> at91sam9261ek.dtb \
> at91sam9263ek.dtb \
> tny_a9263.dtb \
> diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
> new file mode 100644
> index 000000000000..43875d18808f
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91sam9260ek.dts
> @@ -0,0 +1,211 @@
> +/*
> + * Device Tree file for Atmel at91sam9260 Evaluation Kit
> + *
> + * Copyright (C) 2016 Atmel,
> + * 2016 Nicolas Ferre <nicolas.ferre@atmel.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +/dts-v1/;
> +#include "at91sam9260.dtsi"
> +
> +/ {
> + model = "Atmel at91sam9260ek";
> + compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9";
> +
> + chosen {
> + stdout-path = &dbgu;
> + };
> +
> + memory {
> + reg = <0x20000000 0x4000000>;
> + };
> +
> + clocks {
> + slow_xtal {
> + clock-frequency = <32768>;
> + };
> +
> + main_xtal {
> + clock-frequency = <18432000>;
> + };
> + };
> +
> + ahb {
> + apb {
> + usb1: gadget@fffa4000 {
> + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> + };
> +
> + mmc0: mmc@fffa8000 {
> + pinctrl-0 = <
> + &pinctrl_board_mmc0_slot1
> + &pinctrl_mmc0_clk
> + &pinctrl_mmc0_slot1_cmd_dat0
> + &pinctrl_mmc0_slot1_dat1_3>;
> + status = "okay";
> + slot@1 {
> + reg = <1>;
> + bus-width = <4>;
> + cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + usart0: serial@fffb0000 {
> + pinctrl-0 =
> + <&pinctrl_usart0
> + &pinctrl_usart0_rts
> + &pinctrl_usart0_cts
> + &pinctrl_usart0_dtr_dsr
> + &pinctrl_usart0_dcd
> + &pinctrl_usart0_ri>;
> + status = "okay";
> + };
> +
> + usart1: serial@fffb4000 {
> + status = "okay";
> + };
> +
> + ssc0: ssc@fffbc000 {
> + status = "okay";
> + pinctrl-0 = <&pinctrl_ssc0_tx>;
> + };
> +
> + macb0: ethernet@fffc4000 {
> + phy-mode = "rmii";
> + status = "okay";
> + };
> +
> + spi0: spi@fffc8000 {
> + cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
> + mtd_dataflash@0 {
> + compatible = "atmel,at45", "atmel,dataflash";
> + spi-max-frequency = <50000000>;
> + reg = <1>;
> + };
> + };
> +
> + dbgu: serial@fffff200 {
> + status = "okay";
> + };
> +
> + pinctrl@fffff400 {
> + board {
> + pinctrl_board_mmc0_slot1: mmc0_slot1-board {
> + atmel,pins =
> + <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
> + };
> + };
> + };
> +
> + shdwc@fffffd10 {
> + atmel,wakeup-counter = <10>;
> + atmel,wakeup-rtt-timer;
> + };
> +
> + rtc@fffffd20 {
> + atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
> + status = "okay";
> + };
> +
> + watchdog@fffffd40 {
> + status = "okay";
> + };
> +
> + gpbr: syscon@fffffd50 {
> + status = "okay";
> + };
> + };
> +
> + usb0: ohci@00500000 {
> + num-ports = <2>;
> + status = "okay";
> + };
> +
> + nand0: nand@40000000 {
> + nand-bus-width = <8>;
> + nand-ecc-mode = "soft";
> + nand-on-flash-bbt;
> + status = "okay";
> + };
> + };
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> +
> + btn3 {
> + label = "Button 3";
> + gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
> + linux,code = <0x103>;
> + gpio-key,wakeup;
> + };
> +
> + btn4 {
> + label = "Button 4";
> + gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
> + linux,code = <0x104>;
> + gpio-key,wakeup;
> + };
> + };
> +
> + i2c@0 {
> + status = "okay";
> +
> + 24c512@50 {
> + compatible = "24c512";
> + reg = <0x50>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + ds1 {
> + label = "ds1";
> + gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> +
> + ds5 {
> + label = "ds5";
> + gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
> + };
> + };
> +};
> --
> 2.1.3
>
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-05-19 20:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-05-19 12:54 [PATCH] ARM: dts: at91: add at91sam9260ek board DT Nicolas Ferre
2016-05-19 20:00 ` Alexandre Belloni
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox