From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1751351AbcFLErm (ORCPT <rfc822;w@1wt.eu>);
	Sun, 12 Jun 2016 00:47:42 -0400
Received: from mail-pa0-f50.google.com ([209.85.220.50]:33839 "EHLO
	mail-pa0-f50.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1750746AbcFLErk (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Sun, 12 Jun 2016 00:47:40 -0400
Date: Sat, 11 Jun 2016 21:47:36 -0700
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>, Rob Herring <robh+dt@kernel.org>,
        David Brown <david.brown@linaro.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
        Parth Pancholi <parth.pancholi@einfochips.com>
Subject: Re: [PATCH v2 2/2] ARM: dts: sd_600eval: Fix eMMC lockup issue
Message-ID: <20160612044736.GS1256@tuxbot>
References: <1465582795-30266-1-git-send-email-srinivas.kandagatla@linaro.org>
 <1465582795-30266-2-git-send-email-srinivas.kandagatla@linaro.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <1465582795-30266-2-git-send-email-srinivas.kandagatla@linaro.org>
User-Agent: Mutt/1.5.23 (2014-03-12)
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

On Fri 10 Jun 11:19 PDT 2016, Srinivas Kandagatla wrote:

> From: Parth Pancholi <parth.pancholi@einfochips.com>
> 
> This board locks up if we stress test the eMMC, as the regulator s4 is
> unable to supply enough current for all the peripherials attached to it.
> As this supply is wired up to most of the peripherials including DDR,
> it resulted in such lockup.
> 
> This patch fixes this issue by setting s4 regulator correctly with
> Auto power mode.
> 
> Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> [Srinivas Kandagatla: rewrote the change log]
> Tested-by: Girish Sharma <girish.sharma@einfochips.com>
> Signed-off-by: Parth Pancholi <parth.pancholi@einfochips.com>

If I read the msm-3.4 tree correctly most (perhaps all) 8064 devices
should have this setup.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
> index 7df0108..39ae2bc 100644
> --- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
> +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
> @@ -1,6 +1,7 @@
>  #include "qcom-apq8064-v2.0.dtsi"
>  #include "qcom-apq8064-arrow-sd-600eval-pins.dtsi"
>  #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/mfd/qcom-rpm.h>
>  
>  / {
>  	model = "Arrow Electronics, APQ8064 SD_600eval";
> @@ -82,7 +83,8 @@
>  				s4 {
>  					regulator-min-microvolt	= <1800000>;
>  					regulator-max-microvolt	= <1800000>;
> -					qcom,switch-mode-frequency = <3200000>;
> +					qcom,switch-mode-frequency = <1600000>;
> +					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
>  					bias-pull-down;
>  					regulator-always-on;
>  				};
> -- 
> 2.8.3
>