* Re: [PATCH v5 2/2] mtd: nand: sunxi: add reset line support
[not found] ` <20160619161435.50404-2-icenowy@aosc.xyz>
@ 2016-06-19 19:37 ` Maxime Ripard
0 siblings, 0 replies; only message in thread
From: Maxime Ripard @ 2016-06-19 19:37 UTC (permalink / raw)
To: Icenowy Zheng
Cc: wens, boris.brezillon, robh+dt, richard, dwmw2, computersforpeace,
devicetree, linux-kernel, linux-mtd, linux-sunxi,
linux-arm-kernel
[-- Attachment #1: Type: text/plain, Size: 2025 bytes --]
On Mon, Jun 20, 2016 at 12:14:35AM +0800, Icenowy Zheng wrote:
> The NAND controller on some sun8i chips needs its reset line to be
> deasserted before they can enter working state.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
> Changes in v2:
> - Corrected the error checking code of reset line.
>
> Changes in v3:
> - Corrected a more serious error brought in the "fix" of v2.
>
> Changes in v4:
> - Removed unneeded code block after "else".
>
> Changes in v5:
> - Added reassertion code in case of initialization error and device
> remove.
>
> drivers/mtd/nand/sunxi_nand.c | 27 ++++++++++++++++++++++++---
> 1 file changed, 24 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
> index a83a690..3b40186 100644
> --- a/drivers/mtd/nand/sunxi_nand.c
> +++ b/drivers/mtd/nand/sunxi_nand.c
> @@ -39,6 +39,7 @@
> #include <linux/gpio.h>
> #include <linux/interrupt.h>
> #include <linux/iopoll.h>
> +#include <linux/reset.h>
>
> #define NFC_REG_CTL 0x0000
> #define NFC_REG_ST 0x0004
> @@ -269,6 +270,7 @@ struct sunxi_nfc {
> void __iomem *regs;
> struct clk *ahb_clk;
> struct clk *mod_clk;
> + struct reset_control *reset;
> unsigned long assigned_cs;
> unsigned long clk_rate;
> struct list_head chips;
> @@ -1871,26 +1873,41 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
> if (ret)
> goto out_ahb_clk_unprepare;
>
> + nfc->reset = devm_reset_control_get_optional(dev, "ahb");
> +
> + if (!IS_ERR(nfc->reset)) {
> + ret = reset_control_deassert(nfc->reset);
> + if (ret) {
> + dev_err(dev, "reset err %d\n", ret);
> + goto out_mod_clk_unprepare;
> + }
> + } else if (PTR_ERR(nfc->reset) != -ENOENT) {
> + return PTR_ERR(nfc->reset);
You're leaking all the resources here. Please use a goto.
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2016-06-19 19:37 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20160619161435.50404-1-icenowy@aosc.xyz>
[not found] ` <20160619161435.50404-2-icenowy@aosc.xyz>
2016-06-19 19:37 ` [PATCH v5 2/2] mtd: nand: sunxi: add reset line support Maxime Ripard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox