From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: rtc-linux@googlegroups.com,
Alessandro Zummo <a.zummo@towertech.it>,
linux-kernel@vger.kernel.org, cphealy@gmail.com
Subject: Re: [PATCH v2 13/17] RTC: ds1307: Report oscillator problems more intelligently
Date: Tue, 21 Jun 2016 23:22:38 +0200 [thread overview]
Message-ID: <20160621212238.GA5809@piout.net> (raw)
In-Reply-To: <1466493770-11895-12-git-send-email-andrew.smirnov@gmail.com>
On 21/06/2016 at 00:22:46 -0700, Andrey Smirnov wrote :
> Report oscillator problems more intelligently, by printing more
> information about what cause the issue and not yelling "SET TIME!" at
> the user.
>
Well, the proper way of doing that is to ensure that -EINVAL is returned
when reading the time until it has been set once instead of starting the
oscillator and forgetting about that useful information.
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
> drivers/rtc/rtc-ds1307.c | 28 +++++++++++++++++++++++-----
> 1 file changed, 23 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
> index 2af9c00..2169e5b 100644
> --- a/drivers/rtc/rtc-ds1307.c
> +++ b/drivers/rtc/rtc-ds1307.c
> @@ -1424,6 +1424,19 @@ static int ds1307_chip_configure(const struct ds1307 *ds1307)
> return 0;
> }
>
> +static void ds1307_report_clock_halt(const struct ds1307 *ds1307)
> +{
> + dev_warn(&ds1307->client->dev, "RTC's oscillator is turned off. "
> + "Turning it on. Please set time");
> +}
> +
> +static void ds1307_report_oscillator_fault(const struct ds1307 *ds1307)
> +{
> + dev_warn(&ds1307->client->dev, "RTC's reported oscillator fault. "
> + "Clearing the fault flag and re-reading RTC status. "
> + "Please set time");
> +}
> +
> static int ds1307_chip_sanity_check(const struct ds1307 *ds1307)
> {
> int tmp, retries;
> @@ -1453,7 +1466,7 @@ static int ds1307_chip_sanity_check(const struct ds1307 *ds1307)
> if (tmp & DS1307_BIT_CH) {
> i2c_smbus_write_byte_data(client,
> DS1307_REG_SECS, 0);
> - dev_warn(&client->dev, "SET TIME!\n");
> + ds1307_report_clock_halt(ds1307);
> continue;
> }
> break;
> @@ -1469,15 +1482,17 @@ static int ds1307_chip_sanity_check(const struct ds1307 *ds1307)
> DS1307_REG_CONTROL,
> regs[DS1307_REG_CONTROL]
> & ~DS1338_BIT_OSF);
> - dev_warn(&client->dev, "SET TIME!\n");
> + ds1307_report_oscillator_fault(ds1307);
> continue;
> }
> break;
> case ds_1340:
> /* clock halted? turn it on, so clock can tick. */
> - if (tmp & DS1340_BIT_nEOSC)
> + if (tmp & DS1340_BIT_nEOSC) {
> i2c_smbus_write_byte_data(client,
> DS1307_REG_SECS, 0);
> + ds1307_report_clock_halt(ds1307);
> + }
>
> tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG);
> if (tmp < 0) {
> @@ -1489,7 +1504,7 @@ static int ds1307_chip_sanity_check(const struct ds1307 *ds1307)
> if (tmp & DS1340_BIT_OSF) {
> i2c_smbus_write_byte_data(client,
> DS1340_REG_FLAG, 0);
> - dev_warn(&client->dev, "SET TIME!\n");
> + ds1307_report_oscillator_fault(ds1307);
> }
> return 0;
>
> @@ -1500,6 +1515,9 @@ static int ds1307_chip_sanity_check(const struct ds1307 *ds1307)
> DS1307_REG_WDAY,
> regs[DS1307_REG_WDAY]
> | MCP794XX_BIT_VBATEN);
> + dev_warn(&client->dev,
> + "battery backup was disabled. "
> + "Re-enabling it\n");
> }
>
> /* clock halted? turn it on, so clock can tick. */
> @@ -1507,7 +1525,7 @@ static int ds1307_chip_sanity_check(const struct ds1307 *ds1307)
> i2c_smbus_write_byte_data(client,
> DS1307_REG_SECS,
> MCP794XX_BIT_ST);
> - dev_warn(&client->dev, "SET TIME!\n");
> + ds1307_report_clock_halt(ds1307);
> continue;
> }
>
> --
> 2.5.5
>
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
next prev parent reply other threads:[~2016-06-21 21:24 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-21 7:22 [PATCH v2 02/17] RTC: ds1307: Disable square wave and timers as default Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 03/17] RTC: ds1307: Add devicetree bindings for DS1341 Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 04/17] RTC: ds1307: Add DS1341 specific power-saving options Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 05/17] RTC: ds1307: Convert ds1307_can_wakeup_device into a predicate Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 06/17] RTC: ds1307: Convert want_irq " Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 07/17] RTC: ds1307: Move chip configuration into a separate routine Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 08/17] RTC: ds1307: Move chip sanity checking " Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 09/17] RTC: ds1307: Remove register "cache" Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 10/17] RTC: ds1307: Constify struct ds1307 where possible Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 11/17] RTC: ds1307: Convert goto to a loop Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 12/17] RTC: ds1307: Redefine RX8025_REG_* to minimize extra code Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 13/17] RTC: ds1307: Report oscillator problems more intelligently Andrey Smirnov
2016-06-21 21:22 ` Alexandre Belloni [this message]
2016-06-21 23:06 ` Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 14/17] RTC: ds1307: Move last bits of sanity checking out of chip_configure Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 15/17] RTC: rtctest: Change alarm IRQ support detection Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 16/17] RTC: rtctest: Change no IRQ detection for RTC_IRQP_READ Andrey Smirnov
2016-06-21 7:22 ` [PATCH v2 17/17] RTC: rtctest: Change no IRQ detection for RTC_IRQP_SET Andrey Smirnov
2016-06-21 21:17 ` [PATCH v2 02/17] RTC: ds1307: Disable square wave and timers as default Alexandre Belloni
2016-06-21 23:43 ` Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160621212238.GA5809@piout.net \
--to=alexandre.belloni@free-electrons.com \
--cc=a.zummo@towertech.it \
--cc=andrew.smirnov@gmail.com \
--cc=cphealy@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox