From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751704AbcFWHk2 (ORCPT ); Thu, 23 Jun 2016 03:40:28 -0400 Received: from nat-hk.nvidia.com ([203.18.50.4]:57920 "EHLO hkmmgate101.nvidia.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751480AbcFWHk0 (ORCPT ); Thu, 23 Jun 2016 03:40:26 -0400 X-PGP-Universal: processed; by hkpgpgate102.nvidia.com on Thu, 23 Jun 2016 00:40:22 -0700 From: Alexandre Courbot To: Liam Girdwood , Mark Brown , Rob Herring , Mark Rutland , Stephen Warren , Thierry Reding CC: , , , , Alexandre Courbot Subject: [PATCH v2 2/2] arm64: tegra: Add VDD_GPU regulator to Jetson TX1 Date: Thu, 23 Jun 2016 16:39:45 +0900 Message-ID: <20160623073945.11642-2-acourbot@nvidia.com> X-Mailer: git-send-email 2.8.3 In-Reply-To: <20160623073945.11642-1-acourbot@nvidia.com> References: <20160623073945.11642-1-acourbot@nvidia.com> X-NVConfidentiality: public MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add the VDD_GPU regulator (a GPIO-enabled PWM regulator) to the Jetson TX1 board. This addition allows the GPU to be used provided the bootloader properly enabled the GPU node. Signed-off-by: Alexandre Courbot --- Changes since v1: - Include this patch into the series to make sure it is merged after 1/2, otherwise Jetson TX1 will lock when trying to enable the regulator. arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index 983775e637a4..cc9fb5207f9d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -25,6 +25,10 @@ }; }; + gpu@57000000 { + vdd-supply = <&vdd_gpu>; + }; + i2c@7000c400 { backlight: backlight@2c { compatible = "ti,lp8557"; @@ -51,4 +55,18 @@ }; }; }; + + regulators { + vdd_gpu: regulator@100 { + compatible = "pwm-regulator"; + reg = <100>; + pwms = <&pwm 1 4880>; + regulator-name = "VDD_GPU"; + regulator-min-microvolt = <710000>; + regulator-max-microvolt = <1320000>; + enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; + regulator-ramp-delay = <80>; + regulator-enable-ramp-delay = <1000>; + }; + }; }; -- 2.8.3