Re: [linux-sunxi] [PATCH 2/4] power: add axp20x-battery driver

Re: [linux-sunxi] [PATCH 2/4] power: add axp20x-battery driver

[Michael Haas]

Hi,

nice work! Is this in any way related to Bruno Prémonts driver for the 
axp20x?

I've got a reworked version of that lying around, but it's not quite 
ready for submission. Do you know what pieces are missing in your driver 
for axp20x support - as opposed to axp22x, which is already working?

Michael

On 01.07.2016 11:29, Icenowy Zheng wrote:
> This driver is the battery power supply driver of axp20x PMIC. Currently
> it supports only AXP22x variants.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
>   drivers/mfd/axp20x.c           |  14 +++
>   drivers/power/Makefile         |   1 +
>   drivers/power/axp20x_battery.c | 254 +++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 269 insertions(+)
>   create mode 100644 drivers/power/axp20x_battery.c
>
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index cee5288..064e5015 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -166,6 +166,15 @@ static struct resource axp22x_usb_power_supply_resources[] = {
>   	DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
>   };
>   
> +static struct resource axp22x_battery_resources[] = {
> +	DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_BATT_PLUGIN, "BATT_PLUGIN"),
> +	DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_BATT_REMOVAL, "BATT_REMOVAL"),
> +	DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_BATT_ENT_ACT_MODE, "BATT_ENT_ACT_MODE"),
> +	DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_BATT_EXIT_ACT_MODE, "BATT_EXIT_ACT_MODE"),
> +	DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_CHARG, "CHARG"),
> +	DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_CHARG_DONE, "CHARG_DONE"),
> +};
> +
>   static struct resource axp22x_pek_resources[] = {
>   	{
>   		.name   = "PEK_DBR",
> @@ -538,6 +547,11 @@ static struct mfd_cell axp22x_cells[] = {
>   		.of_compatible	= "x-powers,axp202-usb-power-supply",
>   		.num_resources	= ARRAY_SIZE(axp22x_usb_power_supply_resources),
>   		.resources	= axp22x_usb_power_supply_resources,
> +	}, {
> +		.name		= "axp20x-battery",
> +		.of_compatible	= "x-powers,axp202-battery",
> +		.num_resources	= ARRAY_SIZE(axp22x_battery_resources),
> +		.resources	= axp22x_battery_resources,
>   	},
>   };
>   
> diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> index e46b75d..1452d23 100644
> --- a/drivers/power/Makefile
> +++ b/drivers/power/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_GENERIC_ADC_BATTERY)	+= generic-adc-battery.o
>   obj-$(CONFIG_PDA_POWER)		+= pda_power.o
>   obj-$(CONFIG_APM_POWER)		+= apm_power.o
>   obj-$(CONFIG_AXP20X_POWER)	+= axp20x_usb_power.o
> +obj-$(CONFIG_AXP20X_POWER)	+= axp20x_battery.o
>   obj-$(CONFIG_MAX8925_POWER)	+= max8925_power.o
>   obj-$(CONFIG_WM831X_BACKUP)	+= wm831x_backup.o
>   obj-$(CONFIG_WM831X_POWER)	+= wm831x_power.o
> diff --git a/drivers/power/axp20x_battery.c b/drivers/power/axp20x_battery.c
> new file mode 100644
> index 0000000..8fac2cd
> --- /dev/null
> +++ b/drivers/power/axp20x_battery.c
> @@ -0,0 +1,254 @@
> +/*
> + * AXP20x PMIC battery status driver
> + *
> + * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
> + * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
> + * Copyright (C) 2014 Bruno Prémont <bonbons@linux-vserver.org>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under  the terms of the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/axp20x.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/power_supply.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +#define DRVNAME "axp20x-battery"
> +
> +#define AXP20X_PWR_STATUS_ACIN_USED BIT(6)
> +#define AXP20X_PWR_STATUS_VBUS_USED BIT(4)
> +#define AXP20X_PWR_STATUS_BAT_DIRECTION BIT(2)
> +
> +#define AXP20X_OP_MODE_CHARGING BIT(6)
> +#define AXP20X_OP_MODE_BATTERY_PRESENT BIT(5)
> +#define AXP20X_OP_MODE_BATTERY_ACTIVE BIT(3)
> +
> +#define AXP20X_CAPACITY_CORRECT BIT(7)
> +
> +struct axp20x_battery {
> +	struct axp20x_dev *axp20x;
> +	struct regmap *regmap;
> +	struct power_supply *supply;
> +};
> +
> +static irqreturn_t axp20x_battery_irq(int irq, void *devid)
> +{
> +	struct axp20x_battery *power = devid;
> +
> +	power_supply_changed(power->supply);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int axp20x_battery_get_property(struct power_supply *psy,
> +	enum power_supply_property psp, union power_supply_propval *val)
> +{
> +	struct axp20x_battery *power = power_supply_get_drvdata(psy);
> +	unsigned int input, op_mode, capacity, dh, dl;
> +	int ret, ext;
> +
> +	/* All the properties below need the input-status reg value */
> +	ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &input);
> +	if (ret)
> +		return ret;
> +
> +	ret = regmap_read(power->regmap, AXP20X_PWR_OP_MODE, &op_mode);
> +	if (ret)
> +		return ret;
> +
> +	switch (psp) {
> +	case POWER_SUPPLY_PROP_HEALTH:
> +		if (!(op_mode & AXP20X_OP_MODE_BATTERY_PRESENT)) {
> +			val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
> +			break;
> +		}
> +
> +		val->intval = POWER_SUPPLY_HEALTH_GOOD;
> +
> +		if (op_mode & AXP20X_OP_MODE_BATTERY_ACTIVE) {
> +			/* AXP20X is now trying to re-activate the battery */
> +			val->intval = POWER_SUPPLY_HEALTH_DEAD;
> +			break;
> +		}
> +		break;
> +	case POWER_SUPPLY_PROP_PRESENT:
> +		val->intval = !!(op_mode & AXP20X_OP_MODE_BATTERY_PRESENT);
> +		break;
> +	case POWER_SUPPLY_PROP_CAPACITY:
> +		ret = regmap_read(power->regmap, AXP20X_FG_RES, &capacity);
> +		if (ret)
> +			return ret;
> +		if (capacity & AXP20X_CAPACITY_CORRECT)
> +			val->intval = capacity & (~AXP20X_CAPACITY_CORRECT);
> +		else
> +			return -EIO;
> +		/* from axp_capchange function of Allwinner 3.4 driver */
> +		if (val->intval == 127)
> +			val->intval = 100;
> +		break;
> +	case POWER_SUPPLY_PROP_STATUS:
> +		if (!(op_mode & AXP20X_OP_MODE_BATTERY_PRESENT)) {
> +			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
> +			break;
> +		}
> +
> +		ret = regmap_read(power->regmap, AXP20X_FG_RES, &capacity);
> +		if (ret)
> +			return ret;
> +
> +		ext = (input & AXP20X_PWR_STATUS_ACIN_USED) ||
> +		      (input & AXP20X_PWR_STATUS_VBUS_USED);
> +
> +		if (op_mode & AXP20X_OP_MODE_CHARGING)
> +			val->intval = POWER_SUPPLY_STATUS_CHARGING;
> +		else if (!(input & AXP20X_PWR_STATUS_BAT_DIRECTION) && !ext)
> +			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
> +		else if (capacity == (100 | AXP20X_CAPACITY_CORRECT) ||
> +			 capacity == (127 | AXP20X_CAPACITY_CORRECT))
> +			val->intval = POWER_SUPPLY_STATUS_FULL;
> +		else
> +			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
> +		break;
> +	case POWER_SUPPLY_PROP_CURRENT_NOW:
> +		ret = regmap_read(power->regmap, AXP20X_BATT_DISCHRG_I_H, &dh);
> +		if (ret)
> +			return ret;
> +		ret = regmap_read(power->regmap, AXP20X_BATT_DISCHRG_I_L, &dl);
> +		if (ret)
> +			return ret;
> +		/* it's a 12 bit integer, high 8-bit is stored in dh */
> +		val->intval = dh << 4 | dl >> 4;
> +		break;
> +	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> +		ret = regmap_read(power->regmap, AXP20X_BATT_V_H, &dh);
> +		if (ret)
> +			return ret;
> +		ret = regmap_read(power->regmap, AXP20X_BATT_V_L, &dl);
> +		if (ret)
> +			return ret;
> +		/* it's a 12 bit integer, high 8-bit is stored in dh */
> +		val->intval = dh << 4 | dl >> 4;
> +		/* The formula below is from axp22_vbat_to_mV function
> +		 * of Allwinner 3.4 kernel.
> +		 */
> +		val->intval = val->intval * 1100 / 1000;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static enum power_supply_property axp22x_battery_properties[] = {
> +	POWER_SUPPLY_PROP_CAPACITY,
> +	POWER_SUPPLY_PROP_HEALTH,
> +	POWER_SUPPLY_PROP_PRESENT,
> +	POWER_SUPPLY_PROP_STATUS,
> +	POWER_SUPPLY_PROP_CURRENT_NOW,
> +	POWER_SUPPLY_PROP_VOLTAGE_NOW,
> +};
> +
> +static const struct power_supply_desc axp22x_battery_desc = {
> +	.name = "axp20x-battery",
> +	.type = POWER_SUPPLY_TYPE_BATTERY,
> +	.properties = axp22x_battery_properties,
> +	.num_properties = ARRAY_SIZE(axp22x_battery_properties),
> +	.get_property = axp20x_battery_get_property,
> +};
> +
> +static int axp20x_battery_probe(struct platform_device *pdev)
> +{
> +	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
> +	struct power_supply_config psy_cfg = {};
> +	struct axp20x_battery *power;
> +	static const char * const axp22x_irq_names[] = {
> +		"BATT_PLUGIN", "BATT_REMOVAL", "BATT_ENT_ACT_MODE",
> +		"BATT_EXIT_ACT_MODE", "CHARG", "CHARG_DONE", NULL };
> +	static const char * const *irq_names;
> +	const struct power_supply_desc *battery_desc;
> +	int i, irq, ret;
> +
> +	if (!of_device_is_available(pdev->dev.of_node))
> +		return -ENODEV;
> +
> +	if (!axp20x) {
> +		dev_err(&pdev->dev, "Parent drvdata not set\n");
> +		return -EINVAL;
> +	}
> +
> +	power = devm_kzalloc(&pdev->dev, sizeof(*power), GFP_KERNEL);
> +	if (!power)
> +		return -ENOMEM;
> +
> +	power->axp20x = axp20x;
> +	power->regmap = axp20x->regmap;
> +
> +	switch (power->axp20x->variant) {
> +	case AXP221_ID:
> +	case AXP223_ID:
> +		battery_desc = &axp22x_battery_desc;
> +		irq_names = axp22x_irq_names;
> +		break;
> +	default:
> +		dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
> +			axp20x->variant);
> +		return -EINVAL;
> +	}
> +
> +	psy_cfg.of_node = pdev->dev.of_node;
> +	psy_cfg.drv_data = power;
> +
> +	power->supply = devm_power_supply_register(&pdev->dev, battery_desc,
> +						   &psy_cfg);
> +	if (IS_ERR(power->supply))
> +		return PTR_ERR(power->supply);
> +
> +	/* Request irqs after registering, as irqs may trigger immediately */
> +	for (i = 0; irq_names[i]; i++) {
> +		irq = platform_get_irq_byname(pdev, irq_names[i]);
> +		if (irq < 0) {
> +			dev_warn(&pdev->dev, "No IRQ for %s: %d\n",
> +				 irq_names[i], irq);
> +			continue;
> +		}
> +		irq = regmap_irq_get_virq(axp20x->regmap_irqc, irq);
> +		ret = devm_request_any_context_irq(&pdev->dev, irq,
> +				axp20x_battery_irq, 0, DRVNAME, power);
> +		if (ret < 0)
> +			dev_warn(&pdev->dev, "Error requesting %s IRQ: %d\n",
> +				 irq_names[i], ret);
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id axp20x_battery_match[] = {
> +	{ .compatible = "x-powers,axp202-battery" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, axp20x_battery_match);
> +
> +static struct platform_driver axp20x_battery_driver = {
> +	.probe = axp20x_battery_probe,
> +	.driver = {
> +		.name = DRVNAME,
> +		.of_match_table = axp20x_battery_match,
> +	},
> +};
> +
> +module_platform_driver(axp20x_battery_driver);
> +
> +MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.xyz>");
> +MODULE_DESCRIPTION("AXP20x PMIC battery status driver");
> +MODULE_LICENSE("GPL");

Re: [linux-sunxi] [PATCH 2/4] power: add axp20x-battery driver

[maxime.ripard]

[-- Attachment #1: Type: text/plain, Size: 1178 bytes --]

On Tue, Jul 05, 2016 at 04:33:31PM +0800, Icenowy Zheng wrote:
> 
> 
> 05.07.2016, 13:26, "Michael Haas" <michael.haas@mailbox.org>:
> > Hi,
> >
> > nice work! Is this in any way related to Bruno Prémonts driver for the
> > axp20x?
> >
> > I've got a reworked version of that lying around, but it's not quite
> > ready for submission. Do you know what pieces are missing in your driver
> > for axp20x support - as opposed to axp22x, which is already working?
> 
> Therotically, it can run on axp20x. However, I have currently no
> test device. (Still waiting for my C.H.I.P.)  So I can only promise
> it to run on axp22x.

Still, it looks like you just took Bruno's driver, stripped out the
axp20x parts and added the one to deal with axp22x.

This makes the driver look weird, by being called axp20x, without
actually supporting those PMICs, but having some axp22x variables
right in the middle. And that's awfully inconsistent.

I'd rather have you add the AXP20x driver directly, and then add the
needed stuff for the AXP22x.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [linux-sunxi] [PATCH 2/4] power: add axp20x-battery driver

[Bruno Prémont]

On Tue, 5 Jul 2016 11:25:10 +0200 Maxime Ripard wrote:
> On Tue, Jul 05, 2016 at 04:33:31PM +0800, Icenowy Zheng wrote:
> > 
> > 
> > 05.07.2016, 13:26, "Michael Haas" <michael.haas@mailbox.org>:  
> > > Hi,
> > >
> > > nice work! Is this in any way related to Bruno Prémonts driver for the
> > > axp20x?
> > >
> > > I've got a reworked version of that lying around, but it's not quite
> > > ready for submission. Do you know what pieces are missing in your driver
> > > for axp20x support - as opposed to axp22x, which is already working?  
> > 
> > Therotically, it can run on axp20x. However, I have currently no
> > test device. (Still waiting for my C.H.I.P.)  So I can only promise
> > it to run on axp22x.  
> 
> Still, it looks like you just took Bruno's driver, stripped out the
> axp20x parts and added the one to deal with axp22x.
> 
> This makes the driver look weird, by being called axp20x, without
> actually supporting those PMICs, but having some axp22x variables
> right in the middle. And that's awfully inconsistent.
> 
> I'd rather have you add the AXP20x driver directly, and then add the
> needed stuff for the AXP22x.

>From a very quick look at the patch it looks like only basic
"monitoring" features have been retained, and yes, claiming the driver
to be for axp22x and having the functions named axp20x feels weird.

Missing parts are OCV, charge control (be it as interaction with
USB-power where charge current must be limited to not over-drain
USB power source or manual control when user knows more about the USB
power plug than the device).

Proper capacity measurement is a completely different story which I
did not implement (it exists in 3.4 sunxi kernel but is not
straight-forward and makes use of extra registers for data keeping).

Bruno

Re: [linux-sunxi] [PATCH 2/4] power: add axp20x-battery driver

[Michael Haas]

Hi There,

On 05.07.2016 10:33, Icenowy Zheng wrote:
> On 01.07.2016 11:29, Icenowy Zheng wrote:

>>>   +
>>>   +static enum power_supply_property axp22x_battery_properties[] = {
>>>   + POWER_SUPPLY_PROP_CAPACITY,
>>>   + POWER_SUPPLY_PROP_HEALTH,
>>>   + POWER_SUPPLY_PROP_PRESENT,
>>>   + POWER_SUPPLY_PROP_STATUS,
>>>   + POWER_SUPPLY_PROP_CURRENT_NOW,
>>>   + POWER_SUPPLY_PROP_VOLTAGE_NOW,
>>>   +};

Here's what Bruno's driver supports:

static enum power_supply_property axp20x_battery_power_properties[] = {
     POWER_SUPPLY_PROP_PRESENT,
     POWER_SUPPLY_PROP_ONLINE,
     POWER_SUPPLY_PROP_STATUS,
     POWER_SUPPLY_PROP_VOLTAGE_NOW,
     POWER_SUPPLY_PROP_CURRENT_NOW,
     POWER_SUPPLY_PROP_CURRENT_MAX,
     POWER_SUPPLY_PROP_HEALTH,
     POWER_SUPPLY_PROP_TECHNOLOGY,
     POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
     POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
     /* POWER_SUPPLY_PROP_POWER_NOW, */
     POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
     /* POWER_SUPPLY_PROP_CHARGE_NOW, */
     POWER_SUPPLY_PROP_CAPACITY,
     POWER_SUPPLY_PROP_TEMP,
     POWER_SUPPLY_PROP_TEMP_ALERT_MIN,
     POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
};

>>>   +
>>>   +static int axp20x_battery_probe(struct platform_device *pdev)
>>>   +{
>>>   + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
>>>   + struct power_supply_config psy_cfg = {};
>>>   + struct axp20x_battery *power;
>>>   + static const char * const axp22x_irq_names[] = {
>>>   + "BATT_PLUGIN", "BATT_REMOVAL", "BATT_ENT_ACT_MODE",
>>>   + "BATT_EXIT_ACT_MODE", "CHARG", "CHARG_DONE", NULL };


And here are the interrupts handled:

static const char * const irq_names[] = { "BATT_HOT", "BATT_COLD",
         "BATT_PLUGIN", "BATT_REMOVAL", "BATT_ACTIVATE",
         "BATT_ACTIVATED", "BATT_CHARGING", "BATT_CHARGED",
         "BATT_CHG_CURR_LOW", "BATT_POWER_LOW_WARN",
         "BATT_POWER_LOW_CRIT" };



There are a couple of issues with the version of Bruno's driver that I have:

* power management is disabled (in the driver, not in the charger) - 
think suspend/resume
* the temperature sensor data is not turned into a temperature value 
correctly
* the IRQ handlers need to be cleaned up (remove logging)
* device tree binding documentation is missing

Other than that, it's basically working and I have been using it at 
least for some testing.

The device tree bindings support:
* OCV curve support
* battery resistance
* battery capacity
* temp sensor settings

You can find my copy of Bruno's driver here:
https://github.com/mhaas/linux-sunxi/blob/axp209-charger/drivers/power/axp20x_fuel_gauge.c

Thanks,

Michael

Re: [linux-sunxi] [PATCH 2/4] power: add axp20x-battery driver

[Bruno Prémont]

On Tue, 05 Jul 2016 16:47:38 +0800 Icenowy Zheng wrote:
> I read the datasheet of axp20x, and then found that this driver does
> not support backup RTC battery.
> (But maybe backup battery do not need a driver -- at least on IBM PC
> it has no driver)

A driver is needed to enable/disable the RTC battery charging (unless
uboot does it).
However all the driver can do according to datasheet is configure the
charge voltage/current or disable charging completely.
Monitoring RTC battery is not possible, neither is presence detection.

So driver should just apply configuration it finds in device-tree and
eventually share that information via power supply class.

> And I don't know whether the axp20x has default Li-ion/LiPo battery
> OCV parameter. (axp22x seems to be have a set of default OCV)

It seems to have default OCV parameters as well. With empty RTC
battery OCV values are present.

> You can test this driver on AXP20x. (I think I didn't access to
> AXP22x-specified registers in the power supply code)

Bruno

Re: [PATCH 1/4] mfd: axp20x: add adc volatile ranges for axp22x

[Lee Jones]

On Fri, 01 Jul 2016, Icenowy Zheng wrote:

> AXP22x has also some different register map than axp20x, they're also
> added here.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
>  drivers/mfd/axp20x.c       | 1 +
>  include/linux/mfd/axp20x.h | 4 ++++
>  2 files changed, 5 insertions(+)

Applied, thanks.

> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index d62209d..cee5288 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -96,6 +96,7 @@ static const struct regmap_range axp22x_volatile_ranges[] = {
>  	regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP20X_PWR_OP_MODE),
>  	regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
>  	regmap_reg_range(AXP22X_GPIO_STATE, AXP22X_GPIO_STATE),
> +	regmap_reg_range(AXP22X_PMIC_ADC_H, AXP20X_IPSOUT_V_HIGH_L),
>  	regmap_reg_range(AXP20X_FG_RES, AXP20X_FG_RES),
>  };
>  
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> index 0be4982..ad3d9c7 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp20x.h
> @@ -201,6 +201,10 @@ enum {
>  #define AXP20X_OCV_MAX			0xf
>  
>  /* AXP22X specific registers */
> +#define AXP22X_PMIC_ADC_H		0x56
> +#define AXP22X_PMIC_ADC_L		0x57
> +#define AXP22X_TS_ADC_H			0x58
> +#define AXP22X_TS_ADC_L			0x59
>  #define AXP22X_BATLOW_THRES1		0xe6
>  
>  /* AXP288 specific registers */

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog