From: Jean Delvare <jdelvare@suse.de>
To: Vadim Pasternak <vadimp@mellanox.com>
Cc: linux@roeck-us.net, linux-hwmon@vger.kernel.org,
linux-kernel@vger.kernel.org, jiri@resnulli.us
Subject: Re: [patch] hwmon: (pmbus) Add explicit support for DPS-460, DPS-800, and SGD009
Date: Mon, 25 Jul 2016 10:32:01 +0200 [thread overview]
Message-ID: <20160725103201.2c64653a@endymion> (raw)
In-Reply-To: <1469434229-162391-1-git-send-email-vadimp@mellanox.com>
Hi Vadim,
On Mon, 25 Jul 2016 08:10:29 +0000, Vadim Pasternak wrote:
> Provide support for PSU DPS-460, DPS-800 from Delta Electronics, INC and for
> SGD009 from Acbel Polytech, INC.
> These devices do not support the STATUS_CML register, and reports a
> communication error in response to this command.
> For this reason, the status register check is disabled for these controllers.
>
> Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
> Reviewed-by: Jiri Pirko <jiri@mellanox.com>
> ---
> drivers/hwmon/pmbus/pmbus.c | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c
> index 0a74991..f28de37 100644
> --- a/drivers/hwmon/pmbus/pmbus.c
> +++ b/drivers/hwmon/pmbus/pmbus.c
> @@ -25,6 +25,7 @@
> #include <linux/slab.h>
> #include <linux/mutex.h>
> #include <linux/i2c.h>
> +#include <linux/i2c/pmbus.h>
> #include "pmbus.h"
>
> /*
> @@ -167,14 +168,27 @@ static int pmbus_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> struct pmbus_driver_info *info;
> + struct pmbus_platform_data *pdata = NULL;
> + struct device *dev = &client->dev;
>
> info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info),
> GFP_KERNEL);
> if (!info)
> return -ENOMEM;
A blank line here would improve readability IMHO.
> + if (!strcmp(id->name, "dps460") || !strcmp(id->name, "dps800") ||
> + !strcmp(id->name, "sgd009")) {
> + pdata = devm_kzalloc(&client->dev,
You have defined dev, you might as well use it here, and also in the
other devm_kzalloc call.
> + sizeof(struct pmbus_platform_data),
> + GFP_KERNEL);
> + if (!pdata)
> + return -ENOMEM;
> +
> + pdata->flags = PMBUS_SKIP_STATUS_CHECK;
> + }
>
> info->pages = id->driver_data;
> info->identify = pmbus_identify;
> + dev->platform_data = pdata;
>
> return pmbus_do_probe(client, id, info);
> }
> @@ -186,6 +200,8 @@ static const struct i2c_device_id pmbus_id[] = {
> {"adp4000", 1},
> {"bmr453", 1},
> {"bmr454", 1},
> + {"dps460", 1},
> + {"dps800", 1},
> {"mdt040", 1},
> {"ncp4200", 1},
> {"ncp4208", 1},
> @@ -193,6 +209,7 @@ static const struct i2c_device_id pmbus_id[] = {
> {"pdt006", 1},
> {"pdt012", 1},
> {"pmbus", 0},
> + {"sgd009", 1},
> {"tps40400", 1},
> {"tps544b20", 1},
> {"tps544b25", 1},
(non-authoritative)
Reviewed-by: Jean Delvare <jdelvare@suse.de>
--
Jean Delvare
SUSE L3 Support
next prev parent reply other threads:[~2016-07-25 8:32 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-25 8:10 [patch] hwmon: (pmbus) Add explicit support for DPS-460, DPS-800, and SGD009 Vadim Pasternak
2016-07-25 8:32 ` Jean Delvare [this message]
2016-07-25 8:56 ` Vadim Pasternak
-- strict thread matches above, loose matches on Subject: below --
2016-07-25 10:55 Vadim Pasternak
2016-07-26 7:18 ` Jean Delvare
2016-07-30 15:58 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160725103201.2c64653a@endymion \
--to=jdelvare@suse.de \
--cc=jiri@resnulli.us \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=vadimp@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox