[PATCH 0857/1285] Replace numeric parameter like 0444 with macro

[Baole Ni <baolex.ni@intel.com>]

I find that the developers often just specified the numeric value
when calling a macro which is defined with a parameter for access permission.
As we know, these numeric value for access permission have had the corresponding macro,
and that using macro can improve the robustness and readability of the code,
thus, I suggest replacing the numeric parameter with the macro.

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Baole Ni <baolex.ni@intel.com>
---
 drivers/platform/x86/thinkpad_acpi.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index b65ce75..898d185 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -9553,57 +9553,57 @@ static int __init set_ibm_param(const char *val, struct kernel_param *kp)
 	return -EINVAL;
 }
 
-module_param(experimental, int, 0444);
+module_param(experimental, int, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(experimental,
 		 "Enables experimental features when non-zero");
 
 module_param_named(debug, dbg_level, uint, 0);
 MODULE_PARM_DESC(debug, "Sets debug level bit-mask");
 
-module_param(force_load, bool, 0444);
+module_param(force_load, bool, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(force_load,
 		 "Attempts to load the driver even on a "
 		 "mis-identified ThinkPad when true");
 
-module_param_named(fan_control, fan_control_allowed, bool, 0444);
+module_param_named(fan_control, fan_control_allowed, bool, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(fan_control,
 		 "Enables setting fan parameters features when true");
 
-module_param_named(brightness_mode, brightness_mode, uint, 0444);
+module_param_named(brightness_mode, brightness_mode, uint, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(brightness_mode,
 		 "Selects brightness control strategy: "
 		 "0=auto, 1=EC, 2=UCMS, 3=EC+NVRAM");
 
-module_param(brightness_enable, uint, 0444);
+module_param(brightness_enable, uint, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(brightness_enable,
 		 "Enables backlight control when 1, disables when 0");
 
 #ifdef CONFIG_THINKPAD_ACPI_ALSA_SUPPORT
-module_param_named(volume_mode, volume_mode, uint, 0444);
+module_param_named(volume_mode, volume_mode, uint, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(volume_mode,
 		 "Selects volume control strategy: "
 		 "0=auto, 1=EC, 2=N/A, 3=EC+NVRAM");
 
-module_param_named(volume_capabilities, volume_capabilities, uint, 0444);
+module_param_named(volume_capabilities, volume_capabilities, uint, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(volume_capabilities,
 		 "Selects the mixer capabilites: "
 		 "0=auto, 1=volume and mute, 2=mute only");
 
-module_param_named(volume_control, volume_control_allowed, bool, 0444);
+module_param_named(volume_control, volume_control_allowed, bool, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(volume_control,
 		 "Enables software override for the console audio "
 		 "control when true");
 
-module_param_named(software_mute, software_mute_requested, bool, 0444);
+module_param_named(software_mute, software_mute_requested, bool, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(software_mute,
 		 "Request full software mute control");
 
 /* ALSA module API parameters */
-module_param_named(index, alsa_index, int, 0444);
+module_param_named(index, alsa_index, int, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(index, "ALSA index for the ACPI EC Mixer");
-module_param_named(id, alsa_id, charp, 0444);
+module_param_named(id, alsa_id, charp, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(id, "ALSA id for the ACPI EC Mixer");
-module_param_named(enable, alsa_enable, bool, 0444);
+module_param_named(enable, alsa_enable, bool, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(enable, "Enable the ALSA interface for the ACPI EC Mixer");
 #endif /* CONFIG_THINKPAD_ACPI_ALSA_SUPPORT */
 
@@ -9624,25 +9624,25 @@ TPACPI_PARAM(volume);
 TPACPI_PARAM(fan);
 
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
-module_param(dbg_wlswemul, uint, 0444);
+module_param(dbg_wlswemul, uint, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(dbg_wlswemul, "Enables WLSW emulation");
 module_param_named(wlsw_state, tpacpi_wlsw_emulstate, bool, 0);
 MODULE_PARM_DESC(wlsw_state,
 		 "Initial state of the emulated WLSW switch");
 
-module_param(dbg_bluetoothemul, uint, 0444);
+module_param(dbg_bluetoothemul, uint, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(dbg_bluetoothemul, "Enables bluetooth switch emulation");
 module_param_named(bluetooth_state, tpacpi_bluetooth_emulstate, bool, 0);
 MODULE_PARM_DESC(bluetooth_state,
 		 "Initial state of the emulated bluetooth switch");
 
-module_param(dbg_wwanemul, uint, 0444);
+module_param(dbg_wwanemul, uint, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(dbg_wwanemul, "Enables WWAN switch emulation");
 module_param_named(wwan_state, tpacpi_wwan_emulstate, bool, 0);
 MODULE_PARM_DESC(wwan_state,
 		 "Initial state of the emulated WWAN switch");
 
-module_param(dbg_uwbemul, uint, 0444);
+module_param(dbg_uwbemul, uint, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(dbg_uwbemul, "Enables UWB switch emulation");
 module_param_named(uwb_state, tpacpi_uwb_emulstate, bool, 0);
 MODULE_PARM_DESC(uwb_state,
-- 
2.9.2