Re: [PATCH RESEND] xhci:Remove unused marco definitions from the file xhci-hub.c

Re: [PATCH RESEND] xhci:Remove unused marco definitions from the file xhci-hub.c

[Greg KH]

On Mon, Aug 08, 2016 at 12:00:38PM -0400, Nicholas Krause wrote:
> This removes the unneeded marco definitions for the marcos
> of XHCI_PORT_RW1S, XHCI_PORT_RW1C, XHCI_PORT_RW	 and
> XHCI_PORT_RZ due to no uses of these marcos in the file
> xhci-hub.c or any other related kernel source code file
> related to supporting xhci host controllers.
> 
> Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
> ---
>  drivers/usb/host/xhci-hub.c | 23 -----------------------
>  1 file changed, 23 deletions(-)

Again, please stop sending patches, they will be ignored.

Re: [PATCH RESEND] xhci:Remove unused marco definitions from the file xhci-hub.c

[Greg KH]

On Mon, Mar 07, 2016 at 02:20:03PM -0500, Nicholas Krause wrote:
> This removes the unneeded marco definitions for the marcos
> of XHCI_PORT_RW1S, XHCI_PORT_RW1C, XHCI_PORT_RW	 and
> XHCI_PORT_RZ due to no uses of these marcos in the file
> xhci-hub.c or any other related kernel source code file
> related to supporting xhci host controllers.
> 
> Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
> ---
>  drivers/usb/host/xhci-hub.c | 23 -----------------------
>  1 file changed, 23 deletions(-)
> 
> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
> index e75c565..fd430de 100644
> --- a/drivers/usb/host/xhci-hub.c
> +++ b/drivers/usb/host/xhci-hub.c
> @@ -196,29 +196,6 @@ static unsigned int xhci_port_speed(unsigned int port_status)
>   * link state, port power, port indicator state, "wake on" enable state
>   */
>  #define XHCI_PORT_RWS	((0xf<<5) | (1<<9) | (0x3<<14) | (0x7<<25))
> -/*
> - * These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
> - * bit 4 (port reset)
> - */
> -#define	XHCI_PORT_RW1S	((1<<4))
> -/*
> - * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
> - * bits 1, 17, 18, 19, 20, 21, 22, 23
> - * port enable/disable, and
> - * change bits: connect, PED, warm port reset changed (reserved zero for USB 2.0 ports),
> - * over-current, reset, link state, and L1 change
> - */
> -#define XHCI_PORT_RW1CS	((1<<1) | (0x7f<<17))
> -/*
> - * Bit 16 is RW, and writing a '1' to it causes the link state control to be
> - * latched in
> - */
> -#define	XHCI_PORT_RW	((1<<16))
> -/*
> - * These bits are Reserved Zero (RsvdZ) and zero should be written to them:
> - * bits 2, 24, 28:31
> - */
> -#define	XHCI_PORT_RZ	((1<<2) | (1<<24) | (0xf<<28))
>  
>  /*
>   * Given a port state, this function returns a value that would result in the

As I have stated numerous times in the past, please do not send any
future Linux kernel changes, I will not be accepting them.

Mathias, please ignore.

greg k-h

Re: [PATCH RESEND] xhci:Remove unused marco definitions from the file xhci-hub.c

[Greg KH]

On Tue, Dec 29, 2015 at 01:28:16PM -0500, Nicholas Krause wrote:
> This removes the unneeded marco definitions for the marcos
> of XHCI_PORT_RW1S, XHCI_PORT_RW1C, XHCI_PORT_RW	 and
> XHCI_PORT_RZ due to no uses of these marcos in the file
> xhci-hub.c or any other related kernel source code file
> related to supporting xhci host controllers.
> 
> Signed-off-by: Nicholas Krause <xerofoify@gmail.com>

Sorry Nick, you know I will not be taking any patches from you due to
your previous behavior.  Mathias, please ignore this patch.

greg k-h