From: Lee Jones <lee.jones@linaro.org>
To: Wadim Egorov <w.egorov@phytec.de>
Cc: linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
andy.yan@rock-chips.com
Subject: Re: [PATCH] mfd: RK808: Fetch PMIC variant from chip id register
Date: Tue, 9 Aug 2016 10:57:56 +0100 [thread overview]
Message-ID: <20160809095756.GZ5243@dell> (raw)
In-Reply-To: <20160809095601.GY5243@dell>
On Tue, 09 Aug 2016, Lee Jones wrote:
> On Thu, 14 Jul 2016, Wadim Egorov wrote:
>
> > Add and use the chip id registers to determine the PMIC variant.
>
> Yes, much better.
>
> Interrogating the h/w for its model/version number is always
> preferred.
>
> Applied, thanks.
Ah! Slight change of plan. Patch does not apply on v4.8-rc1.
Please rebase, apply Andy's Tested-by and re-submit.
> > Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
> > ---
> >
> > This patch is based on top of
> >
> > [v6,1/5] mfd: RK808: Add RK818 support
> > (https://patchwork.kernel.org/patch/9172223/)
> >
> > ---
> > drivers/mfd/rk808.c | 17 +++++++++--------
> > include/linux/mfd/rk808.h | 6 ++++--
> > 2 files changed, 13 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
> > index 66f7b08..fbec1d8 100644
> > --- a/drivers/mfd/rk808.c
> > +++ b/drivers/mfd/rk808.c
> > @@ -291,8 +291,8 @@ static void rk808_device_shutdown(void)
> > }
> >
> > static const struct of_device_id rk808_of_match[] = {
> > - { .compatible = "rockchip,rk808", .data = (void *) RK808_ID },
> > - { .compatible = "rockchip,rk818", .data = (void *) RK818_ID },
> > + { .compatible = "rockchip,rk808" },
> > + { .compatible = "rockchip,rk818" },
> > { },
> > };
> > MODULE_DEVICE_TABLE(of, rk808_of_match);
> > @@ -302,7 +302,6 @@ static int rk808_probe(struct i2c_client *client,
> > {
> > struct device_node *np = client->dev.of_node;
> > struct rk808 *rk808;
> > - const struct of_device_id *match;
> > const struct rk808_reg_data *pre_init_reg;
> > const struct mfd_cell *cells;
> > int nr_pre_init_regs;
> > @@ -315,12 +314,14 @@ static int rk808_probe(struct i2c_client *client,
> > if (!rk808)
> > return -ENOMEM;
> >
> > - match = of_match_device(rk808_of_match, &client->dev);
> > - if (!match) {
> > - dev_err(&client->dev, "Unable to match OF ID\n");
> > - return -ENODEV;
> > + rk808->variant = i2c_smbus_read_word_data(client, RK808_ID_MSB);
> > + if (rk808->variant < 0) {
> > + dev_err(&client->dev, "Failed to read the chip id at 0x%02x\n",
> > + RK808_ID_MSB);
> > + return rk808->variant;
> > }
> > - rk808->variant = (long)match->data;
> > +
> > + dev_dbg(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant);
> >
> > switch (rk808->variant) {
> > case RK808_ID:
> > diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
> > index e5ae21d..fc5db6f 100644
> > --- a/include/linux/mfd/rk808.h
> > +++ b/include/linux/mfd/rk808.h
> > @@ -69,6 +69,8 @@ enum rk808_reg {
> > #define RK808_RTC_INT_REG 0x12
> > #define RK808_RTC_COMP_LSB_REG 0x13
> > #define RK808_RTC_COMP_MSB_REG 0x14
> > +#define RK808_ID_MSB 0x17
> > +#define RK808_ID_LSB 0x18
> > #define RK808_CLK32OUT_REG 0x20
> > #define RK808_VB_MON_REG 0x21
> > #define RK808_THERMAL_REG 0x22
> > @@ -318,8 +320,8 @@ enum {
> > };
> >
> > enum {
> > - RK808_ID,
> > - RK818_ID,
> > + RK808_ID = 0x0000,
> > + RK818_ID = 0x8181,
> > };
> >
> > struct rk808 {
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
prev parent reply other threads:[~2016-08-09 9:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-14 11:42 [PATCH] mfd: RK808: Fetch PMIC variant from chip id register Wadim Egorov
2016-07-20 13:06 ` Andy Yan
2016-08-09 9:56 ` Lee Jones
2016-08-09 9:57 ` Lee Jones [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160809095756.GZ5243@dell \
--to=lee.jones@linaro.org \
--cc=andy.yan@rock-chips.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=w.egorov@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox