From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932852AbcHIN6I (ORCPT ); Tue, 9 Aug 2016 09:58:08 -0400 Received: from comal.ext.ti.com ([198.47.26.152]:51021 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932398AbcHIN6G (ORCPT ); Tue, 9 Aug 2016 09:58:06 -0400 From: "Andrew F. Davis" To: Santosh Shilimkar , Russell King , Suman Anna CC: , , "Andrew F . Davis" Subject: [PATCH 3/3] ARM: dts: keystone-k2g: Add DSP GPIO controller node Date: Tue, 9 Aug 2016 08:57:53 -0500 Message-ID: <20160809135753.20712-3-afd@ti.com> X-Mailer: git-send-email 2.9.2 In-Reply-To: <20160809135753.20712-1-afd@ti.com> References: <20160809135753.20712-1-afd@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add the DSP GPIO controller node on Keystone 2 Galileo SoC. This is used to send interrupts to the only DSP processor subsystem present on the SoC. The IP is identical to that of the equivalent nodes on existing K2 SoCs. Signed-off-by: Andrew F. Davis Signed-off-by: Suman Anna --- arch/arm/boot/dts/keystone-k2g.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index eccda9c..025ad12 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -106,5 +106,12 @@ #interrupt-cells = <1>; ti,syscon-dev = <&devctrl 0x2a0>; }; + + dspgpio0: keystone_dsp_gpio@02620240 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; }; }; -- 2.9.2