From: Lee Jones <lee.jones@linaro.org>
To: Wadim Egorov <w.egorov@phytec.de>
Cc: linux-kernel@vger.kernel.org, rtc-linux@googlegroups.com,
devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org,
dianders@chromium.org, zyw@rock-chips.com, robh+dt@kernel.org,
mark.rutland@arm.com, lgirdwood@gmail.com, broonie@kernel.org,
a.zummo@towertech.it, alexandre.belloni@free-electrons.com
Subject: Re: [PATCH v7 1/4] mfd: RK808: Add RK818 support
Date: Thu, 18 Aug 2016 15:34:40 +0100 [thread overview]
Message-ID: <20160818143440.GG4254@dell> (raw)
In-Reply-To: <1470819907-11237-2-git-send-email-w.egorov@phytec.de>
On Wed, 10 Aug 2016, Wadim Egorov wrote:
> The RK818 chip is a Power Management IC (PMIC) for multimedia and handheld
> devices. It contains the following components:
>
> - Regulators
> - RTC
> - Clocking
> - Battery support
>
> Both RK808 and RK818 chips are using a similar register map,
> so we can reuse the RTC and Clocking functionality.
>
> Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
> Tested-by: Andy Yan <andy.yan@rock-chips.com>
> ---
> Changes since v6:
> - Squashed in the patch
> mfd: RK808: Fetch PMIC variant from chip id register
>
> ---
> drivers/mfd/Kconfig | 4 +-
> drivers/mfd/rk808.c | 226 +++++++++++++++++++++++++++++++++++++++-------
> include/linux/mfd/rk808.h | 154 +++++++++++++++++++++++++++++--
> 3 files changed, 342 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 2d1fb64..a55be95 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -852,13 +852,13 @@ config MFD_RC5T583
> different functionality of the device.
>
> config MFD_RK808
> - tristate "Rockchip RK808 Power Management chip"
> + tristate "Rockchip RK808/RK818 Power Management Chip"
> depends on I2C && OF
> select MFD_CORE
> select REGMAP_I2C
> select REGMAP_IRQ
> help
> - If you say yes here you get support for the RK808
> + If you say yes here you get support for the RK808 and RK818
> Power Management chips.
> This driver provides common support for accessing the device
> through I2C interface. The device supports multiple sub-devices
> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
> index 49d7f62..fbec1d8 100644
> --- a/drivers/mfd/rk808.c
> +++ b/drivers/mfd/rk808.c
> @@ -1,11 +1,15 @@
> /*
> - * MFD core driver for Rockchip RK808
> + * MFD core driver for Rockchip RK808/RK818
> *
> * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
> *
> * Author: Chris Zhong <zyw@rock-chips.com>
> * Author: Zhang Qing <zhangqing@rock-chips.com>
> *
> + * Copyright (C) 2016 PHYTEC Messtechnik GmbH
> + *
> + * Author: Wadim Egorov <w.egorov@phytec.de>
> + *
> * This program is free software; you can redistribute it and/or modify it
> * under the terms and conditions of the GNU General Public License,
> * version 2, as published by the Free Software Foundation.
> @@ -22,6 +26,7 @@
> #include <linux/mfd/core.h>
> #include <linux/module.h>
> #include <linux/regmap.h>
> +#include <linux/of_device.h>
Alphabetical.
> struct rk808_reg_data {
> int addr;
> @@ -57,6 +62,14 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
> return false;
> }
>
> +static const struct regmap_config rk818_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = RK818_USB_CTRL_REG,
> + .cache_type = REGCACHE_RBTREE,
> + .volatile_reg = rk808_is_volatile_reg,
> +};
> +
> static const struct regmap_config rk808_regmap_config = {
> .reg_bits = 8,
> .val_bits = 8,
> @@ -79,11 +92,21 @@ static const struct mfd_cell rk808s[] = {
> {
> .name = "rk808-rtc",
> .num_resources = ARRAY_SIZE(rtc_resources),
> - .resources = &rtc_resources[0],
> + .resources = rtc_resources,
?
> },
> };
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2016-08-18 14:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-10 9:05 [PATCH v7 0/4] Add support for rk818 Wadim Egorov
2016-08-10 9:05 ` [PATCH v7 1/4] mfd: RK808: Add RK818 support Wadim Egorov
2016-08-18 14:34 ` Lee Jones [this message]
2016-08-19 6:18 ` Wadim Egorov
2016-08-19 8:33 ` Lee Jones
2016-08-10 9:05 ` [PATCH v7 2/4] regulator: rk808: Add regulator driver for RK818 Wadim Egorov
2016-08-10 9:05 ` [PATCH v7 3/4] mfd: dt-bindings: Add RK818 device tree bindings document Wadim Egorov
2016-08-10 9:05 ` [PATCH v7 4/4] rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808 Wadim Egorov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160818143440.GG4254@dell \
--to=lee.jones@linaro.org \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=rtc-linux@googlegroups.com \
--cc=w.egorov@phytec.de \
--cc=zyw@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox