From: Ingo Molnar <mingo@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
Thomas Gleixner <tglx@linutronix.de>,
Peter Zijlstra <a.p.zijlstra@chello.nl>,
Andrew Morton <akpm@linux-foundation.org>
Subject: [GIT PULL] timer fixes
Date: Thu, 18 Aug 2016 22:46:13 +0200 [thread overview]
Message-ID: <20160818204613.GA32485@gmail.com> (raw)
Linus,
Please pull the latest timers-urgent-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers-urgent-for-linus
# HEAD: be5769e2061ac40b32daa83e28e1c4aac7133511 clocksource/drivers/mips-gic-timer: Make gic_clocksource_of_init() return int
Three clocksource driver fixes.
Thanks,
Ingo
------------------>
Arnd Bergmann (1):
clocksource/drivers/kona: Fix get_counter() error handling
Gregory CLEMENT (1):
clocksource/drivers/time-armada-370-xp: Fix the clock reference
Paul Gortmaker (1):
clocksource/drivers/mips-gic-timer: Make gic_clocksource_of_init() return int
drivers/clocksource/bcm_kona_timer.c | 16 ++++++++++------
drivers/clocksource/mips-gic-timer.c | 2 +-
drivers/clocksource/time-armada-370-xp.c | 1 -
3 files changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c
index 7e3fd375a627..92f6e4deee74 100644
--- a/drivers/clocksource/bcm_kona_timer.c
+++ b/drivers/clocksource/bcm_kona_timer.c
@@ -66,10 +66,10 @@ static void kona_timer_disable_and_clear(void __iomem *base)
}
-static void
+static int
kona_timer_get_counter(void __iomem *timer_base, uint32_t *msw, uint32_t *lsw)
{
- int loop_limit = 4;
+ int loop_limit = 3;
/*
* Read 64-bit free running counter
@@ -83,18 +83,19 @@ kona_timer_get_counter(void __iomem *timer_base, uint32_t *msw, uint32_t *lsw)
* if new hi-word is equal to previously read hi-word then stop.
*/
- while (--loop_limit) {
+ do {
*msw = readl(timer_base + KONA_GPTIMER_STCHI_OFFSET);
*lsw = readl(timer_base + KONA_GPTIMER_STCLO_OFFSET);
if (*msw == readl(timer_base + KONA_GPTIMER_STCHI_OFFSET))
break;
- }
+ } while (--loop_limit);
if (!loop_limit) {
pr_err("bcm_kona_timer: getting counter failed.\n");
pr_err(" Timer will be impacted\n");
+ return -ETIMEDOUT;
}
- return;
+ return 0;
}
static int kona_timer_set_next_event(unsigned long clc,
@@ -112,8 +113,11 @@ static int kona_timer_set_next_event(unsigned long clc,
uint32_t lsw, msw;
uint32_t reg;
+ int ret;
- kona_timer_get_counter(timers.tmr_regs, &msw, &lsw);
+ ret = kona_timer_get_counter(timers.tmr_regs, &msw, &lsw);
+ if (ret)
+ return ret;
/* Load the "next" event tick value */
writel(lsw + clc, timers.tmr_regs + KONA_GPTIMER_STCM0_OFFSET);
diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c
index d91e8725917c..b4b3ab5a11ad 100644
--- a/drivers/clocksource/mips-gic-timer.c
+++ b/drivers/clocksource/mips-gic-timer.c
@@ -164,7 +164,7 @@ void __init gic_clocksource_init(unsigned int frequency)
gic_start_count();
}
-static void __init gic_clocksource_of_init(struct device_node *node)
+static int __init gic_clocksource_of_init(struct device_node *node)
{
struct clk *clk;
int ret;
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index 719b478d136e..3c39e6f45971 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -338,7 +338,6 @@ static int __init armada_xp_timer_init(struct device_node *np)
struct clk *clk = of_clk_get_by_name(np, "fixed");
int ret;
- clk = of_clk_get(np, 0);
if (IS_ERR(clk)) {
pr_err("Failed to get clock");
return PTR_ERR(clk);
next reply other threads:[~2016-08-19 2:29 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-18 20:46 Ingo Molnar [this message]
-- strict thread matches above, loose matches on Subject: below --
2025-04-10 21:34 [GIT PULL] timer fixes Ingo Molnar
2025-04-10 22:52 ` pr-tracker-bot
2025-02-08 9:27 Ingo Molnar
2025-02-08 20:07 ` pr-tracker-bot
2024-04-14 8:42 Ingo Molnar
2024-04-14 18:48 ` pr-tracker-bot
2024-04-07 8:03 Ingo Molnar
2024-04-07 16:44 ` pr-tracker-bot
2023-01-12 14:44 Ingo Molnar
2023-01-12 23:01 ` pr-tracker-bot
2022-08-13 10:25 Ingo Molnar
2022-08-13 16:25 ` Borislav Petkov
2022-08-13 20:27 ` Linus Torvalds
2022-08-14 8:57 ` Ingo Molnar
2022-08-14 12:41 ` Borislav Petkov
2022-08-14 17:24 ` Paul E. McKenney
2022-08-14 17:42 ` Borislav Petkov
2022-08-13 21:48 ` pr-tracker-bot
2020-12-27 9:26 Ingo Molnar
2020-12-27 17:27 ` pr-tracker-bot
2019-12-17 11:55 Ingo Molnar
2019-12-17 19:14 ` Linus Torvalds
2019-12-17 19:30 ` Peter Zijlstra
2019-12-17 20:16 ` Linus Torvalds
2019-12-17 20:35 ` Peter Zijlstra
2019-12-17 20:43 ` Linus Torvalds
2019-12-17 20:54 ` Peter Zijlstra
2019-12-17 19:20 ` pr-tracker-bot
2019-05-16 16:09 Ingo Molnar
2019-05-16 18:20 ` pr-tracker-bot
2019-04-20 7:45 Ingo Molnar
2019-04-20 19:25 ` pr-tracker-bot
2018-07-13 20:01 Ingo Molnar
2017-03-07 20:36 Ingo Molnar
2016-10-28 8:38 Ingo Molnar
2016-08-12 19:43 Ingo Molnar
2016-01-14 10:12 Ingo Molnar
2015-10-03 10:20 Ingo Molnar
2015-09-17 8:13 Ingo Molnar
2015-03-28 13:50 Ingo Molnar
2015-03-17 16:50 Ingo Molnar
2015-03-01 17:06 Ingo Molnar
2013-12-17 13:52 Ingo Molnar
2013-09-28 18:19 Ingo Molnar
2013-08-19 9:41 Ingo Molnar
2013-02-26 11:32 Ingo Molnar
2012-09-21 19:12 Ingo Molnar
2012-08-03 16:47 Ingo Molnar
2011-12-20 19:25 Ingo Molnar
2011-12-05 19:00 Ingo Molnar
2011-06-19 8:51 Ingo Molnar
2011-06-13 9:55 Ingo Molnar
2011-06-06 19:10 [GIT pull] " Thomas Gleixner
2011-05-20 17:52 Thomas Gleixner
2011-04-19 16:03 [GIT PULL] " Ingo Molnar
2011-04-16 10:09 Ingo Molnar
2011-04-07 17:42 Ingo Molnar
2011-02-06 12:06 Ingo Molnar
2011-01-24 13:24 Ingo Molnar
2010-11-26 13:40 Ingo Molnar
2010-03-26 15:34 Ingo Molnar
2009-12-18 18:49 Ingo Molnar
2009-10-08 18:35 Ingo Molnar
2009-08-25 18:04 Ingo Molnar
2009-06-26 19:03 Ingo Molnar
2009-04-09 15:43 Ingo Molnar
2009-01-30 23:07 [git pull] " Ingo Molnar
2009-01-26 17:21 Ingo Molnar
2009-01-06 16:18 Ingo Molnar
2008-12-04 20:52 Ingo Molnar
2008-11-11 18:47 Ingo Molnar
2008-09-23 19:41 Ingo Molnar
2008-09-17 9:59 Ingo Molnar
2008-08-25 17:52 Ingo Molnar
2008-08-22 12:24 Ingo Molnar
2008-07-24 15:18 Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160818204613.GA32485@gmail.com \
--to=mingo@kernel.org \
--cc=a.p.zijlstra@chello.nl \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).