From: Nishanth Menon <nm@ti.com>
To: Kevin Hilman <khilman@kernel.org>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
Ulf Hansson <ulf.hansson@linaro.org>
Cc: Dave Gerlach <d-gerlach@ti.com>, Keerthy <j-keerthy@ti.com>,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
Tero Kristo <t-kristo@ti.com>,
Russell King <rmk+kernel@armlinux.org.uk>,
Sudeep Holla <sudeep.holla@arm.com>,
Santosh Shilimkar <ssantosh@kernel.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-pm@vger.kernel.org>, Nishanth Menon <nm@ti.com>
Subject: [PATCH 2/3] dt-bindings: genpd: Add K2G device definitions
Date: Fri, 19 Aug 2016 18:56:52 -0500 [thread overview]
Message-ID: <20160819235653.26355-3-nm@ti.com> (raw)
In-Reply-To: <20160819235653.26355-1-nm@ti.com>
From: Dave Gerlach <d-gerlach@ti.com>
Provide macros representing each devices index as understood by TI
SCI to be used in the device node power-domain references. These
are identifiers for the K2G devices managed by the PMMC. Includes
contributions from Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
MAINTAINERS | 1 +
include/dt-bindings/genpd/k2g.h | 90 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 91 insertions(+)
create mode 100644 include/dt-bindings/genpd/k2g.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 657fb6a10286..ea14b08c30bb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11574,6 +11574,7 @@ F: Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
F: drivers/firmware/ti_sci*
F: include/linux/soc/ti/ti_sci_protocol.h
F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+F: include/dt-bindings/genpd/k2g.h
THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
diff --git a/include/dt-bindings/genpd/k2g.h b/include/dt-bindings/genpd/k2g.h
new file mode 100644
index 000000000000..91ad827e0ca1
--- /dev/null
+++ b/include/dt-bindings/genpd/k2g.h
@@ -0,0 +1,90 @@
+/*
+ * TI K2G SoC Device definitions
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_GENPD_K2G_H
+#define _DT_BINDINGS_GENPD_K2G_H
+
+/* Documented in http://processors.wiki.ti.com/index.php/TISCI */
+
+#define K2G_DEV_PMMC0 0x0000
+#define K2G_DEV_MLB0 0x0001
+#define K2G_DEV_DSS0 0x0002
+#define K2G_DEV_MCBSP0 0x0003
+#define K2G_DEV_MCASP0 0x0004
+#define K2G_DEV_MCASP1 0x0005
+#define K2G_DEV_MCASP2 0x0006
+#define K2G_DEV_DCAN0 0x0008
+#define K2G_DEV_DCAN1 0x0009
+#define K2G_DEV_EMIF0 0x000a
+#define K2G_DEV_MMCHS0 0x000b
+#define K2G_DEV_MMCHS1 0x000c
+#define K2G_DEV_GPMC0 0x000d
+#define K2G_DEV_ELM0 0x000e
+#define K2G_DEV_SPI0 0x0010
+#define K2G_DEV_SPI1 0x0011
+#define K2G_DEV_SPI2 0x0012
+#define K2G_DEV_SPI3 0x0013
+#define K2G_DEV_ICSS0 0x0014
+#define K2G_DEV_ICSS1 0x0015
+#define K2G_DEV_USB0 0x0016
+#define K2G_DEV_USB1 0x0017
+#define K2G_DEV_NSS0 0x0018
+#define K2G_DEV_PCIE0 0x0019
+#define K2G_DEV_GPIO0 0x001b
+#define K2G_DEV_GPIO1 0x001c
+#define K2G_DEV_TIMER64_0 0x001d
+#define K2G_DEV_TIMER64_1 0x001e
+#define K2G_DEV_TIMER64_2 0x001f
+#define K2G_DEV_TIMER64_3 0x0020
+#define K2G_DEV_TIMER64_4 0x0021
+#define K2G_DEV_TIMER64_5 0x0022
+#define K2G_DEV_TIMER64_6 0x0023
+#define K2G_DEV_MSGMGR0 0x0025
+#define K2G_DEV_BOOTCFG0 0x0026
+#define K2G_DEV_ARM_BOOTROM0 0x0027
+#define K2G_DEV_DSP_BOOTROM0 0x0029
+#define K2G_DEV_DEBUGSS0 0x002b
+#define K2G_DEV_UART0 0x002c
+#define K2G_DEV_UART1 0x002d
+#define K2G_DEV_UART2 0x002e
+#define K2G_DEV_EHRPWM0 0x002f
+#define K2G_DEV_EHRPWM1 0x0030
+#define K2G_DEV_EHRPWM2 0x0031
+#define K2G_DEV_EHRPWM3 0x0032
+#define K2G_DEV_EHRPWM4 0x0033
+#define K2G_DEV_EHRPWM5 0x0034
+#define K2G_DEV_EQEP0 0x0035
+#define K2G_DEV_EQEP1 0x0036
+#define K2G_DEV_EQEP2 0x0037
+#define K2G_DEV_ECAP0 0x0038
+#define K2G_DEV_ECAP1 0x0039
+#define K2G_DEV_I2C0 0x003a
+#define K2G_DEV_I2C1 0x003b
+#define K2G_DEV_I2C2 0x003c
+#define K2G_DEV_EDMA0 0x003f
+#define K2G_DEV_SEMAPHORE0 0x0040
+#define K2G_DEV_INTC0 0x0041
+#define K2G_DEV_GIC0 0x0042
+#define K2G_DEV_QSPI0 0x0043
+#define K2G_DEV_ARM_64B_COUNTER0 0x0044
+#define K2G_DEV_TETRIS0 0x0045
+#define K2G_DEV_CGEM0 0x0046
+#define K2G_DEV_MSMC0 0x0047
+#define K2G_DEV_CBASS0 0x0049
+#define K2G_DEV_BOARD0 0x004c
+#define K2G_DEV_EDMA1 0x004f
+
+#endif
--
2.9.1.200.gb1ec08f
next prev parent reply other threads:[~2016-08-19 23:57 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-19 23:56 [PATCH 0/3] ARM: K2G: Add support for TI-SCI Generic PM Domains Nishanth Menon
2016-08-19 23:56 ` [PATCH 1/3] Documentation: dt: Add TI-SCI " Nishanth Menon
2016-09-02 14:31 ` Rob Herring
2016-08-19 23:56 ` Nishanth Menon [this message]
2016-08-25 7:32 ` [PATCH 2/3] dt-bindings: genpd: Add K2G device definitions Ulf Hansson
2016-08-19 23:56 ` [PATCH 3/3] soc: ti: Add ti_sci_pm_domains driver Nishanth Menon
2016-08-25 7:27 ` Ulf Hansson
2016-08-26 23:37 ` Dave Gerlach
2016-08-30 19:43 ` Dave Gerlach
2016-08-30 20:26 ` Ulf Hansson
2016-09-06 20:28 ` Dave Gerlach
2016-09-07 18:38 ` Kevin Hilman
2016-09-08 9:27 ` Ulf Hansson
2016-09-08 17:38 ` Kevin Hilman
2016-09-08 18:04 ` Dave Gerlach
2016-09-09 8:34 ` Ulf Hansson
2016-09-08 9:18 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160819235653.26355-3-nm@ti.com \
--to=nm@ti.com \
--cc=d-gerlach@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=j-keerthy@ti.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=peter.ujfalusi@ti.com \
--cc=rjw@rjwysocki.net \
--cc=rmk+kernel@armlinux.org.uk \
--cc=ssantosh@kernel.org \
--cc=sudeep.holla@arm.com \
--cc=t-kristo@ti.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox