From: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
To: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>,
Jan Kara <jack@suse.cz>, Kay Sievers <kay@vrfy.org>,
Tejun Heo <tj@kernel.org>, Calvin Owens <calvinowens@fb.com>,
Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org,
Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Subject: Re: [PATCH][RFC] printk: make pr_cont buffer per-cpu
Date: Wed, 24 Aug 2016 10:14:20 +0900 [thread overview]
Message-ID: <20160824011420.GA452@swordfish> (raw)
In-Reply-To: <20160823114702.GC4866@pathway.suse.cz>
Hello,
On (08/23/16 13:47), Petr Mladek wrote:
[..]
> > if (!(lflags & LOG_NEWLINE)) {
> > + if (!this_cpu_read(cont_printing)) {
> > + if (system_state == SYSTEM_RUNNING) {
> > + this_cpu_write(cont_printing, true);
> > + preempt_disable();
> > + }
> > + }
>
> I am afraid that this is not acceptable. It means that printk() will have
> an unexpected side effect. The missing "\n" at the end of a printed
> string would disable preemption. See below for more.
missing '\n' must WARN about "sched while atomic" eventually, so it
shouldn't go unnoticed or stay hidden.
> I think that cont lines should be a corner case. There should be only
> a limited use of them. We should not make too complicated things to
> support them. Also printk() must not get harder to use because of them.
> I still see a messed output rather as a cosmetic problem in compare with
> possible possible deadlocks or hung tasks.
oh, I would love it if pr_cont() was never used in SMP. but this is not
the case, unfortunately. and, ironically, where pr_cont really matters
is debugging -- for instance, look at arch/x86/kernel/dumpstack_{32,64}.c
show_regs() or show_stack_log_lvl()
void show_regs(struct pt_regs *regs)
{
...
if (!user_mode(regs)) {
pr_emerg("Stack:\n");
show_stack_log_lvl(NULL, regs, ®s->sp, 0, KERN_EMERG);
pr_emerg("Code:");
ip = (u8 *)regs->ip - code_prologue;
if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
/* try starting at IP */
ip = (u8 *)regs->ip;
code_len = code_len - code_prologue + 1;
}
for (i = 0; i < code_len; i++, ip++) {
if (ip < (u8 *)PAGE_OFFSET ||
probe_kernel_address(ip, c)) {
pr_cont(" Bad EIP value.");
break;
}
if (ip == (u8 *)regs->ip)
pr_cont(" <%02x>", c);
else
pr_cont(" %02x", c);
}
}
pr_cont("\n");
}
or arch/x86/mm/kmemcheck/error.c
... or arch/arm/kernel/traps.c
static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
{
unsigned int fp, mode;
int ok = 1;
printk("Backtrace: ");
if (!tsk)
tsk = current;
if (regs) {
fp = frame_pointer(regs);
mode = processor_mode(regs);
} else if (tsk != current) {
fp = thread_saved_fp(tsk);
mode = 0x10;
} else {
asm("mov %0, fp" : "=r" (fp) : : "cc");
mode = 0x10;
}
if (!fp) {
pr_cont("no frame pointer");
ok = 0;
} else if (verify_stack(fp)) {
pr_cont("invalid frame pointer 0x%08x", fp);
ok = 0;
} else if (fp < (unsigned long)end_of_stack(tsk))
pr_cont("frame pointer underflow");
pr_cont("\n");
if (ok)
c_backtrace(fp, mode);
}
or arch/arm/mm/fault.c show_pte()... and so on and so forth.
well, I do understand what you mean and agree with it, but I'm
afraid pr_cont() kinda matters after all and people *probably*
expect it to be SMP safe (I'm not entirely sure whether all of
those pr_cont() calls were put there with the idea that the
output can be messed up and quite hard to read).
-ss
next prev parent reply other threads:[~2016-08-24 1:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-22 15:40 [PATCH][RFC] printk: make pr_cont buffer per-cpu Sergey Senozhatsky
2016-08-22 16:10 ` Joe Perches
2016-08-23 1:10 ` Sergey Senozhatsky
2016-08-23 5:18 ` Sergey Senozhatsky
2016-08-23 11:47 ` Petr Mladek
2016-08-24 1:14 ` Sergey Senozhatsky [this message]
2016-08-24 8:19 ` Petr Mladek
2016-08-24 14:27 ` Sergey Senozhatsky
2016-08-25 21:27 ` Petr Mladek
2016-08-25 21:33 ` Petr Mladek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160824011420.GA452@swordfish \
--to=sergey.senozhatsky.work@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=calvinowens@fb.com \
--cc=jack@suse.cz \
--cc=kay@vrfy.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmladek@suse.com \
--cc=sergey.senozhatsky@gmail.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox