linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Phidias Chiang <phidias.chiang@canonical.com>,
	Anisse Astier <anisse@astier.eu>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Yu C Chen <yu.c.chen@intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] gpiolib: Add possibility to mask which GPIOs are added to IRQ domain
Date: Thu, 15 Sep 2016 18:52:09 +0300	[thread overview]
Message-ID: <20160915155210.94413-1-mika.westerberg@linux.intel.com> (raw)
In-Reply-To: <CACRpkdZBbcL87Hq94sFYdDOWnC7S_JGtArTNMimAps663UQNgw@mail.gmail.com>

When using GPIO irqchip helpers to setup irqchip for a gpiolib based
driver, it is not possible to select which GPIOs to add to the IRQ domain.
Instead it just adds all GPIOs which is not always desired. For example
there might be GPIOs that for some reason just cannot be used as interrupts
at all.

To make this possible we add valid_mask to each gpio_chip and by default
assume all GPIOs can be used as interrupts. Drivers can then tune this
using clear_bit() or similar before they call gpiochip_irqchip_add().

Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/gpio/gpiolib.c      | 32 +++++++++++++++++++++++++++++---
 include/linux/gpio/driver.h |  1 +
 2 files changed, 30 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 53ff25ac66d8..d84c23b47f44 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1186,6 +1186,18 @@ int gpiochip_add_data(struct gpio_chip *chip, void *data)
 		if (status)
 			goto err_remove_chip;
 	}
+
+#ifdef CONFIG_GPIOLIB_IRQCHIP
+	chip->valid_mask = kcalloc(BITS_TO_LONGS(chip->ngpio), sizeof(long),
+				   GFP_KERNEL);
+	if (!chip->valid_mask)
+		return -ENOMEM;
+
+	/* All GPIOs are valid interrupt sources by default */
+	for (i = 0; i < chip->ngpio; i++)
+		set_bit(i, chip->valid_mask);
+#endif
+
 	return 0;
 
 err_remove_chip:
@@ -1442,9 +1454,12 @@ void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
 	}
 
 	/* Set the parent IRQ for all affected IRQs */
-	for (offset = 0; offset < gpiochip->ngpio; offset++)
+	for (offset = 0; offset < gpiochip->ngpio; offset++) {
+		if (!test_bit(offset, gpiochip->valid_mask))
+			continue;
 		irq_set_parent(irq_find_mapping(gpiochip->irqdomain, offset),
 			       parent_irq);
+	}
 }
 EXPORT_SYMBOL_GPL(gpiochip_set_chained_irqchip);
 
@@ -1551,9 +1566,12 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
 
 	/* Remove all IRQ mappings and delete the domain */
 	if (gpiochip->irqdomain) {
-		for (offset = 0; offset < gpiochip->ngpio; offset++)
+		for (offset = 0; offset < gpiochip->ngpio; offset++) {
+			if (!test_bit(offset, gpiochip->valid_mask))
+				continue;
 			irq_dispose_mapping(
 				irq_find_mapping(gpiochip->irqdomain, offset));
+		}
 		irq_domain_remove(gpiochip->irqdomain);
 	}
 
@@ -1562,6 +1580,9 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
 		gpiochip->irqchip->irq_release_resources = NULL;
 		gpiochip->irqchip = NULL;
 	}
+
+	kfree(gpiochip->valid_mask);
+	gpiochip->valid_mask = NULL;
 }
 
 /**
@@ -1597,6 +1618,7 @@ int _gpiochip_irqchip_add(struct gpio_chip *gpiochip,
 			  struct lock_class_key *lock_key)
 {
 	struct device_node *of_node;
+	bool irq_base_set = false;
 	unsigned int offset;
 	unsigned irq_base = 0;
 
@@ -1646,13 +1668,17 @@ int _gpiochip_irqchip_add(struct gpio_chip *gpiochip,
 	 * necessary to allocate descriptors for all IRQs.
 	 */
 	for (offset = 0; offset < gpiochip->ngpio; offset++) {
+		if (!test_bit(offset, gpiochip->valid_mask))
+			continue;
 		irq_base = irq_create_mapping(gpiochip->irqdomain, offset);
-		if (offset == 0)
+		if (!irq_base_set) {
 			/*
 			 * Store the base into the gpiochip to be used when
 			 * unmapping the irqs.
 			 */
 			gpiochip->irq_base = irq_base;
+			irq_base_set = true;
+		}
 	}
 
 	acpi_gpiochip_request_interrupts(gpiochip);
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index 50882e09289b..8a7430230562 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -191,6 +191,7 @@ struct gpio_chip {
 	unsigned int		irq_default_type;
 	int			irq_parent;
 	struct lock_class_key	*lock_key;
+	unsigned long		*valid_mask;
 #endif
 
 #if defined(CONFIG_OF_GPIO)
-- 
2.9.3

  parent reply	other threads:[~2016-09-15 15:52 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-22  7:56 [PATCH] pinctrl: cherryview: Do not mask all interrupts on probe Mika Westerberg
2015-06-01  9:23 ` Mika Westerberg
2015-06-02 13:53   ` Linus Walleij
2015-06-02 14:15     ` Mika Westerberg
2016-08-16 16:12       ` Anisse Astier
2016-08-17  8:13         ` Mika Westerberg
2016-08-17 13:42           ` Anisse Astier
2016-08-18 12:13             ` Mika Westerberg
2016-08-18 13:52               ` Anisse Astier
2016-08-18 13:58                 ` Mika Westerberg
2016-09-08 10:13                   ` Phidias Chiang
2016-09-08 10:24                     ` Mika Westerberg
2016-09-08 16:28                       ` Phidias Chiang
2016-09-09  6:18                         ` Mika Westerberg
2016-09-09  8:23                           ` Phidias Chiang
2016-09-09  8:58                             ` Mika Westerberg
2016-09-11  8:05                               ` Mika Westerberg
2016-09-12  6:56                                 ` Phidias Chiang
2016-09-12  9:04                                   ` Mika Westerberg
2016-09-12 13:04                                     ` Phidias Chiang
2016-09-12 13:11                                       ` Mika Westerberg
2016-09-13  9:18                                         ` Linus Walleij
2016-09-13  9:33                                           ` Mika Westerberg
2016-09-13 12:22                                             ` Linus Walleij
2016-09-13 12:52                                               ` Mika Westerberg
2016-09-13 20:57                                                 ` Linus Walleij
2016-09-14  8:26                                                   ` Mika Westerberg
2016-09-14 12:46                                                     ` Linus Walleij
2016-09-14 15:12                                                       ` Mika Westerberg
2016-09-15 12:39                                                         ` Linus Walleij
2016-09-15 15:42                                                           ` Mika Westerberg
2016-09-15 15:52                                                           ` Mika Westerberg [this message]
2016-09-15 15:52                                                             ` [PATCH 2/2] pinctrl: cherryview: Do not add all southwest and north GPIOs to IRQ domain Mika Westerberg
2016-09-15 16:07                                                             ` [PATCH 1/2] gpiolib: Add possibility to mask which GPIOs are added " Marc Zyngier
2016-09-15 18:12                                                               ` Mika Westerberg
2016-09-15 18:50                                                                 ` Thomas Gleixner
2016-09-18 11:16                                                             ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160915155210.94413-1-mika.westerberg@linux.intel.com \
    --to=mika.westerberg@linux.intel.com \
    --cc=anisse@astier.eu \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=phidias.chiang@canonical.com \
    --cc=tglx@linutronix.de \
    --cc=yu.c.chen@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).