From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Danny Milosavljevic <dannym@scratchpost.org>
Cc: Mark Brown <broonie@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
alsa-devel@alsa-project.org, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-sunxi@googlegroups.com
Subject: Re: [PATCH v4 3/3] ASoC: sun4i-codec: Add custom regmap configs
Date: Sun, 18 Sep 2016 22:27:41 +0200 [thread overview]
Message-ID: <20160918202741.GM17518@lukather> (raw)
In-Reply-To: <20160915163630.18026-4-dannym@scratchpost.org>
[-- Attachment #1: Type: text/plain, Size: 2454 bytes --]
On Thu, Sep 15, 2016 at 06:36:30PM +0200, Danny Milosavljevic wrote:
> ASoC: sun4i-codec: The A20 has a few extra registers that the A10
> doesn't have.
> Therefore, use different regmaps for A10 as compared to A20.
Same comment with the commit log.
>
> Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
> ---
> sound/soc/sunxi/sun4i-codec.c | 33 ++++++++++++++++++++++++++++++---
> 1 file changed, 30 insertions(+), 3 deletions(-)
>
> diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
> index 3b53b78..c5d6d84c 100644
> --- a/sound/soc/sunxi/sun4i-codec.c
> +++ b/sound/soc/sunxi/sun4i-codec.c
> @@ -682,12 +682,37 @@ static const struct regmap_config sun4i_codec_regmap_config = {
> .reg_bits = 32,
> .reg_stride = 4,
> .val_bits = 32,
> + .max_register = SUN4I_CODEC_ADC_RXCNT,
> +};
> +
> +static const struct regmap_config sun7i_codec_regmap_config = {
> + .reg_bits = 32,
> + .reg_stride = 4,
> + .val_bits = 32,
> .max_register = SUN7I_CODEC_AC_MIC_PHONE_CAL,
> };
>
> +struct sun4i_codec_quirks {
> + const struct regmap_config *regmap_config;
> +};
> +
> +static const struct sun4i_codec_quirks sun4i_codec_quirks = {
> + .regmap_config = &sun4i_codec_regmap_config,
> +};
> +
> +static const struct sun4i_codec_quirks sun7i_codec_quirks = {
> + .regmap_config = &sun7i_codec_regmap_config,
> +};
> +
> static const struct of_device_id sun4i_codec_of_match[] = {
> - { .compatible = "allwinner,sun4i-a10-codec" },
> - { .compatible = "allwinner,sun7i-a20-codec" },
> + {
> + .compatible = "allwinner,sun4i-a10-codec",
> + .data = &sun4i_codec_quirks,
> + },
> + {
> + .compatible = "allwinner,sun7i-a20-codec",
> + .data = &sun7i_codec_quirks,
> + },
> {}
> };
> MODULE_DEVICE_TABLE(of, sun4i_codec_of_match);
> @@ -760,6 +785,7 @@ static int sun4i_codec_probe(struct platform_device *pdev)
> {
> struct snd_soc_card *card;
> struct sun4i_codec *scodec;
> + const struct sun4i_codec_quirks *quirks;
> struct resource *res;
> void __iomem *base;
> int ret;
> @@ -777,8 +803,9 @@ static int sun4i_codec_probe(struct platform_device *pdev)
> return PTR_ERR(base);
> }
>
> + quirks = of_device_get_match_data(&pdev->dev);
And you probably want to check that quirks isn't null there.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
prev parent reply other threads:[~2016-09-18 20:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-15 16:36 [PATCH v4 0/3] ASoC: sun4i-codec: Distinguish sun4i from sun7i Danny Milosavljevic
2016-09-15 16:36 ` [PATCH v4 1/3] ASoC: sun4i-codec: rename sun4i_codec_widgets for consistency Danny Milosavljevic
2016-09-18 20:04 ` Maxime Ripard
2016-09-15 16:36 ` [PATCH v4 2/3] ASoC: rename some sun7i-only registers Danny Milosavljevic
2016-09-18 20:17 ` Maxime Ripard
2016-09-15 16:36 ` [PATCH v4 3/3] ASoC: sun4i-codec: Add custom regmap configs Danny Milosavljevic
2016-09-18 20:27 ` Maxime Ripard [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160918202741.GM17518@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=dannym@scratchpost.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox