linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Radim Krčmář" <rkrcmar@redhat.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
	Wanpeng Li <kernellwp@gmail.com>
Subject: Re: [PATCH v2 2/3] KVM: VMX: join functions that disable x2apic msr intercepts
Date: Fri, 7 Oct 2016 14:30:43 +0200	[thread overview]
Message-ID: <20161007123043.GA20011@potion> (raw)
In-Reply-To: <d5da97b7-ca0d-ab47-779c-effe464b40e3@redhat.com>

2016-09-30 10:29+0200, Paolo Bonzini:
> On 29/09/2016 22:41, Radim Krčmář wrote:
>>  	for (msr = 0x800; msr <= 0x8ff; msr++) {
>>  		if (msr == 0x839 /* TMCCT */)
>>  			continue;
>> -		vmx_disable_intercept_msr_read_x2apic(msr, true);
>> +		vmx_disable_intercept_msr_x2apic(msr, MSR_TYPE_R, true);
>>  	}
>>  
>>  	/* TPR */
>> -	vmx_disable_intercept_msr_write_x2apic(0x808, true);
>> +	vmx_disable_intercept_msr_x2apic(0x808, MSR_TYPE_W, true);
>>  	/* EOI */
>> -	vmx_disable_intercept_msr_write_x2apic(0x80b, true);
>> +	vmx_disable_intercept_msr_x2apic(0x80b, MSR_TYPE_W, true);
>>  	/* SELF-IPI */
>> -	vmx_disable_intercept_msr_write_x2apic(0x83f, true);
>> +	vmx_disable_intercept_msr_x2apic(0x83f, MSR_TYPE_W, true);
>>  
>>  	/*
>>  	 * (enable_apicv && !kvm_vcpu_apicv_active()) ||
>>  	 * 	!enable_apicv
>>  	 */
>>  	/* TPR */
>> -	vmx_disable_intercept_msr_read_x2apic(0x808, false);
>> -	vmx_disable_intercept_msr_write_x2apic(0x808, false);
>> +	vmx_disable_intercept_msr_x2apic(0x808, MSR_TYPE_R | MSR_TYPE_W, false);
> 
> Alternatively you could place the two function calls for 0x808 together:
> 
>  	for (msr = 0x800; msr <= 0x8ff; msr++)
> 		vmx_disable_intercept_msr_x2apic(msr, MSR_TYPE_R, true);
> 
>  	/*
> 	 * TPR reads and writes can be virtualized even if virtual interrupt delivery
>          * is not in use.
> 	 */
> 	vmx_disable_intercept_msr_x2apic(0x808, MSR_TYPE_R | MSR_TYPE_W, false);
> 	vmx_disable_intercept_msr_x2apic(0x808, MSR_TYPE_W, true);
> 
> 	/* EOI */
> 	vmx_disable_intercept_msr_x2apic(0x80b, MSR_TYPE_W, true);
> 
>  	/* SELF-IPI */
> 	vmx_disable_intercept_msr_x2apic(0x83f, MSR_TYPE_W, true);

I have performed this change, thanks, and applied to kvm/queue;
please check the complete patch below:
---8<---
vmx_disable_intercept_msr_read_x2apic() and
vmx_disable_intercept_msr_write_x2apic() differed only in the type.
Pass the type to a new function.

[Ordered and commented TPR intercept according to Paolo's suggestion.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
---
 arch/x86/kvm/vmx.c | 51 +++++++++++++++------------------------------------
 1 file changed, 15 insertions(+), 36 deletions(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 8c83268f6f4c..69ff1be3db7b 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -4656,33 +4656,18 @@ static void vmx_disable_intercept_for_msr(u32 msr, bool longmode_only)
 						msr, MSR_TYPE_R | MSR_TYPE_W);
 }
 
-static void vmx_disable_intercept_msr_read_x2apic(u32 msr, bool apicv_active)
+static void vmx_disable_intercept_msr_x2apic(u32 msr, int type, bool apicv_active)
 {
 	if (apicv_active) {
 		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_legacy_x2apic_apicv,
-				msr, MSR_TYPE_R);
+				msr, type);
 		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_longmode_x2apic_apicv,
-				msr, MSR_TYPE_R);
+				msr, type);
 	} else {
 		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_legacy_x2apic,
-				msr, MSR_TYPE_R);
+				msr, type);
 		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_longmode_x2apic,
-				msr, MSR_TYPE_R);
-	}
-}
-
-static void vmx_disable_intercept_msr_write_x2apic(u32 msr, bool apicv_active)
-{
-	if (apicv_active) {
-		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_legacy_x2apic_apicv,
-				msr, MSR_TYPE_W);
-		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_longmode_x2apic_apicv,
-				msr, MSR_TYPE_W);
-	} else {
-		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_legacy_x2apic,
-				msr, MSR_TYPE_W);
-		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_longmode_x2apic,
-				msr, MSR_TYPE_W);
+				msr, type);
 	}
 }
 
@@ -6463,29 +6448,23 @@ static __init int hardware_setup(void)
 
 	set_bit(0, vmx_vpid_bitmap); /* 0 is reserved for host */
 
-	/*
-	 * enable_apicv && kvm_vcpu_apicv_active()
-	 */
 	for (msr = 0x800; msr <= 0x8ff; msr++) {
 		if (msr == 0x839 /* TMCCT */)
 			continue;
-		vmx_disable_intercept_msr_read_x2apic(msr, true);
+		vmx_disable_intercept_msr_x2apic(msr, MSR_TYPE_R, true);
 	}
 
-	/* TPR */
-	vmx_disable_intercept_msr_write_x2apic(0x808, true);
-	/* EOI */
-	vmx_disable_intercept_msr_write_x2apic(0x80b, true);
-	/* SELF-IPI */
-	vmx_disable_intercept_msr_write_x2apic(0x83f, true);
-
 	/*
-	 * (enable_apicv && !kvm_vcpu_apicv_active()) ||
-	 * 	!enable_apicv
+	 * TPR reads and writes can be virtualized even if virtual interrupt
+	 * delivery is not in use.
 	 */
-	/* TPR */
-	vmx_disable_intercept_msr_read_x2apic(0x808, false);
-	vmx_disable_intercept_msr_write_x2apic(0x808, false);
+	vmx_disable_intercept_msr_x2apic(0x808, MSR_TYPE_W, true);
+	vmx_disable_intercept_msr_x2apic(0x808, MSR_TYPE_R | MSR_TYPE_W, false);
+
+	/* EOI */
+	vmx_disable_intercept_msr_x2apic(0x80b, MSR_TYPE_W, true);
+	/* SELF-IPI */
+	vmx_disable_intercept_msr_x2apic(0x83f, MSR_TYPE_W, true);
 
 	if (enable_ept) {
 		kvm_mmu_set_mask_ptes(VMX_EPT_READABLE_MASK,

  reply	other threads:[~2016-10-07 12:30 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-29 20:41 [PATCH v2 0/3] KVM: VMX: refactor global page-sized bitmaps Radim Krčmář
2016-09-29 20:41 ` [PATCH v2 1/3] KVM: VMX: remove functions that enable msr intercepts Radim Krčmář
2016-09-29 20:41 ` [PATCH v2 2/3] KVM: VMX: join functions that disable x2apic " Radim Krčmář
2016-09-30  8:29   ` Paolo Bonzini
2016-10-07 12:30     ` Radim Krčmář [this message]
2016-10-07 23:43       ` Wanpeng Li
2016-09-29 20:41 ` [PATCH v2 3/3] KVM: VMX: refactor setup of global page-sized bitmaps Radim Krčmář
2016-09-30  8:32   ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161007123043.GA20011@potion \
    --to=rkrcmar@redhat.com \
    --cc=kernellwp@gmail.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).