From: LABBE Corentin <clabbe.montjoie@gmail.com>
To: Icenowy Zheng <icenowy@aosc.xyz>
Cc: Thierry Reding <thierry.reding@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
Russell King <linux@armlinux.org.uk>,
linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: Re: [linux-sunxi] [PATCH 2/5] pwm: Add Allwinner A31 SoC support
Date: Tue, 11 Oct 2016 11:02:01 +0200 [thread overview]
Message-ID: <20161011090201.GA5736@Red> (raw)
In-Reply-To: <20161011063449.54775-2-icenowy@aosc.xyz>
Hello
I have a minor comment below
On Tue, Oct 11, 2016 at 02:34:46PM +0800, Icenowy Zheng wrote:
> This adds a generic PWM framework driver for the PWM controller found
> on Allwinner A31 and A31s SoCs.
>
> The PWM controller is different with other Allwinner SoCs, with a
> control register per channel (in other SoCs the control register is
> shared), and each channel are allocated 16 bytes of address (but only 8
> bytes are used.)
>
> In order to use the driver for all channels, device nodes should be
> created per channel.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
> drivers/pwm/Kconfig | 10 ++
> drivers/pwm/Makefile | 1 +
> drivers/pwm/pwm-sun6i.c | 323 ++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 334 insertions(+)
> create mode 100644 drivers/pwm/pwm-sun6i.c
>
> +
> +static int sun6i_pwm_probe(struct platform_device *pdev)
> +{
> + struct sun6i_pwm_chip *pwm;
> + struct resource *res;
> + u32 val;
> + int ret;
> + const struct of_device_id *match;
> +
> + match = of_match_device(sun6i_pwm_dt_ids, &pdev->dev);
match is not used after.
Regards
Corentin Labbe
next parent reply other threads:[~2016-10-11 9:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20161011063449.54775-1-icenowy@aosc.xyz>
[not found] ` <20161011063449.54775-2-icenowy@aosc.xyz>
2016-10-11 9:02 ` LABBE Corentin [this message]
2016-10-11 12:45 ` [PATCH 2/5] pwm: Add Allwinner A31 SoC support Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161011090201.GA5736@Red \
--to=clabbe.montjoie@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.xyz \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox