linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Radim Krčmář" <rkrcmar@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>, Igor Mammedov <imammedo@redhat.com>
Subject: [PATCH 2/4] KVM: x86: replace kvm_apic_id with kvm_{x,x2}apic_id
Date: Fri,  2 Dec 2016 20:43:59 +0100	[thread overview]
Message-ID: <20161202194401.10038-3-rkrcmar@redhat.com> (raw)
In-Reply-To: <20161202194401.10038-1-rkrcmar@redhat.com>

There were three calls sites:
 - recalculate_apic_map and kvm_apic_match_physical_addr, where it would
   only complicate implementation of x2APIC hotplug;
 - in apic_debug, where it was still somewhat preserved, but keeping the
   old function just for apic_debug was not worth it

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
---
 arch/x86/kvm/lapic.c | 41 ++++++++++++++++++++++++++++++-----------
 arch/x86/kvm/lapic.h | 11 -----------
 2 files changed, 30 insertions(+), 22 deletions(-)

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 09edd32b8e42..e645b4bc6437 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -115,6 +115,16 @@ static inline int apic_enabled(struct kvm_lapic *apic)
 	(LVT_MASK | APIC_MODE_MASK | APIC_INPUT_POLARITY | \
 	 APIC_LVT_REMOTE_IRR | APIC_LVT_LEVEL_TRIGGER)
 
+static inline u8 kvm_xapic_id(struct kvm_lapic *apic)
+{
+	return kvm_lapic_get_reg(apic, APIC_ID) >> 24;
+}
+
+static inline u32 kvm_x2apic_id(struct kvm_lapic *apic)
+{
+	return apic->vcpu->vcpu_id;
+}
+
 static inline bool kvm_apic_map_get_logical_dest(struct kvm_apic_map *map,
 		u32 dest_id, struct kvm_lapic ***cluster, u16 *mask) {
 	switch (map->mode) {
@@ -159,13 +169,13 @@ static void recalculate_apic_map(struct kvm *kvm)
 	struct kvm_apic_map *new, *old = NULL;
 	struct kvm_vcpu *vcpu;
 	int i;
-	u32 max_id = 255;
+	u32 max_id = 256; /* enough space for any xAPIC ID */
 
 	mutex_lock(&kvm->arch.apic_map_lock);
 
 	kvm_for_each_vcpu(i, vcpu, kvm)
 		if (kvm_apic_present(vcpu))
-			max_id = max(max_id, kvm_apic_id(vcpu->arch.apic));
+			max_id = max(max_id, kvm_x2apic_id(vcpu->arch.apic));
 
 	new = kvm_kvzalloc(sizeof(struct kvm_apic_map) +
 	                   sizeof(struct kvm_lapic *) * ((u64)max_id + 1));
@@ -179,16 +189,23 @@ static void recalculate_apic_map(struct kvm *kvm)
 		struct kvm_lapic *apic = vcpu->arch.apic;
 		struct kvm_lapic **cluster;
 		u16 mask;
-		u32 ldr, aid;
+		u32 ldr;
+		u8 xapic_id;
+		u32 x2apic_id;
 
 		if (!kvm_apic_present(vcpu))
 			continue;
 
-		aid = kvm_apic_id(apic);
-		ldr = kvm_lapic_get_reg(apic, APIC_LDR);
+		xapic_id = kvm_xapic_id(apic);
+		x2apic_id = kvm_x2apic_id(apic);
 
-		if (aid <= new->max_apic_id)
-			new->phys_map[aid] = apic;
+		if (apic_x2apic_mode(apic) &&
+				x2apic_id <= new->max_apic_id)
+			new->phys_map[x2apic_id] = apic;
+		else if (!apic_x2apic_mode(apic))
+			new->phys_map[xapic_id] = apic;
+
+		ldr = kvm_lapic_get_reg(apic, APIC_LDR);
 
 		if (apic_x2apic_mode(apic)) {
 			new->mode |= KVM_APIC_MODE_X2APIC;
@@ -250,6 +267,8 @@ static inline void kvm_apic_set_x2apic_id(struct kvm_lapic *apic, u32 id)
 {
 	u32 ldr = ((id >> 4) << 16) | (1 << (id & 0xf));
 
+	WARN_ON_ONCE(id != apic->vcpu->vcpu_id);
+
 	kvm_lapic_set_reg(apic, APIC_ID, id);
 	kvm_lapic_set_reg(apic, APIC_LDR, ldr);
 	recalculate_apic_map(apic->vcpu->kvm);
@@ -591,9 +610,9 @@ static bool kvm_apic_match_physical_addr(struct kvm_lapic *apic, u32 mda)
 		return true;
 
 	if (apic_x2apic_mode(apic))
-		return mda == kvm_apic_id(apic);
+		return mda == kvm_x2apic_id(apic);
 
-	return mda == SET_APIC_DEST_FIELD(kvm_apic_id(apic));
+	return mda == SET_APIC_DEST_FIELD(kvm_xapic_id(apic));
 }
 
 static bool kvm_apic_match_logical_addr(struct kvm_lapic *apic, u32 mda)
@@ -1907,9 +1926,9 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event)
 	vcpu->arch.apic_arb_prio = 0;
 	vcpu->arch.apic_attention = 0;
 
-	apic_debug("%s: vcpu=%p, id=%d, base_msr="
+	apic_debug("%s: vcpu=%p, id=0x%x, base_msr="
 		   "0x%016" PRIx64 ", base_address=0x%0lx.\n", __func__,
-		   vcpu, kvm_apic_id(apic),
+		   vcpu, kvm_lapic_get_reg(apic, APIC_ID),
 		   vcpu->arch.apic_base, apic->base_address);
 }
 
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index e0c80233b3e1..cb16e6fd2330 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -202,17 +202,6 @@ static inline int kvm_lapic_latched_init(struct kvm_vcpu *vcpu)
 	return lapic_in_kernel(vcpu) && test_bit(KVM_APIC_INIT, &vcpu->arch.apic->pending_events);
 }
 
-static inline u32 kvm_apic_id(struct kvm_lapic *apic)
-{
-	/* To avoid a race between apic_base and following APIC_ID update when
-	 * switching to x2apic_mode, the x2apic mode returns initial x2apic id.
-	 */
-	if (apic_x2apic_mode(apic))
-		return apic->vcpu->vcpu_id;
-
-	return kvm_lapic_get_reg(apic, APIC_ID) >> 24;
-}
-
 bool kvm_apic_pending_eoi(struct kvm_vcpu *vcpu, int vector);
 
 void wait_lapic_expire(struct kvm_vcpu *vcpu);
-- 
2.10.2

  parent reply	other threads:[~2016-12-02 19:44 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-02 19:43 [PATCH 0/4] KVM: x86: allow hotplug of VCPU with APIC ID over 0xff Radim Krčmář
2016-12-02 19:43 ` [PATCH 1/4] KVM: x86: use delivery to self in hyperv synic Radim Krčmář
2016-12-05 14:41   ` David Hildenbrand
2016-12-05 16:03     ` Radim Krčmář
2016-12-02 19:43 ` Radim Krčmář [this message]
2016-12-02 19:44 ` [PATCH 3/4] KVM: x86: make interrupt delivery fast and slow path behave the same Radim Krčmář
2016-12-02 19:44 ` [PATCH 4/4] KVM: x86: allow hotplug of VCPU with APIC ID over 0xff Radim Krčmář
2016-12-05 14:37   ` David Hildenbrand
2016-12-05 16:02     ` Radim Krčmář
2016-12-05 18:00       ` David Hildenbrand
2016-12-05 20:57         ` Radim Krčmář
2016-12-06  9:37           ` David Hildenbrand
2016-12-06 12:52             ` Radim Krčmář
2016-12-07 12:03   ` Paolo Bonzini
2016-12-07 15:47     ` Radim Krčmář

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161202194401.10038-3-rkrcmar@redhat.com \
    --to=rkrcmar@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).