From: Grygorii Strashko <grygorii.strashko@ti.com>
To: "David S. Miller" <davem@davemloft.net>, <netdev@vger.kernel.org>,
Mugunthan V N <mugunthanvnm@ti.com>,
Richard Cochran <richardcochran@gmail.com>
Cc: Sekhar Nori <nsekhar@ti.com>, <linux-kernel@vger.kernel.org>,
<linux-omap@vger.kernel.org>, <devicetree@vger.kernel.org>,
Murali Karicheri <m-karicheri2@ti.com>,
Wingman Kwok <w-kwok2@ti.com>,
Thomas Gleixner <tglx@linutronix.de>,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH v5 00/13] net: ethernet: ti: cpts: update and fixes
Date: Tue, 6 Dec 2016 18:00:32 -0600 [thread overview]
Message-ID: <20161207000045.28333-1-grygorii.strashko@ti.com> (raw)
It is preparation series intended to clean up and optimize TI CPTS driver to
facilitate further integration with other TI's SoCs like Keystone 2.
Changes in v5:
- fixed copy paste error in cpts_release
- reworked cc.mult/shift and cc_mult initialization
Changes in v4:
- fixed build error in patch
"net: ethernet: ti: cpts: clean up event list if event pool is empty"
- rebased on top of net-next
Changes in v3:
- patches reordered: fixes and small updates moved first
- added comments in code about cpts->cc_mult
- conversation range (maxsec) limited to 10sec
Changes in v2:
- patch "net: ethernet: ti: cpts: rework initialization/deinitialization"
was split on 4 patches
- applied comments from Richard Cochran
- dropped patch
"net: ethernet: ti: cpts: add return value to tx and rx timestamp funcitons"
- new patches added:
"net: ethernet: ti: cpts: drop excessive writes to CTRL and INT_EN regs"
and "clocksource: export the clocks_calc_mult_shift to use by timestamp code"
Links on prev versions:
v4: https://lkml.org/lkml/2016/12/6/496
v3: https://www.spinics.net/lists/devicetree/msg153474.html
v2: http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1282034.html
v1: http://www.spinics.net/lists/linux-omap/msg131925.html
Grygorii Strashko (11):
net: ethernet: ti: cpts: switch to readl/writel_relaxed()
net: ethernet: ti: allow cpts to be built separately
net: ethernet: ti: cpsw: minimize direct access to struct cpts
net: ethernet: ti: cpts: fix unbalanced clk api usage in cpts_register/unregister
net: ethernet: ti: cpts: fix registration order
net: ethernet: ti: cpts: disable cpts when unregistered
net: ethernet: ti: cpts: drop excessive writes to CTRL and INT_EN regs
net: ethernet: ti: cpts: rework initialization/deinitialization
net: ethernet: ti: cpts: move dt props parsing to cpts driver
net: ethernet: ti: cpts: calc mult and shift from refclk freq
net: ethernet: ti: cpts: fix overflow check period
Murali Karicheri (1):
clocksource: export the clocks_calc_mult_shift to use by timestamp code
WingMan Kwok (1):
net: ethernet: ti: cpts: clean up event list if event pool is empty
Documentation/devicetree/bindings/net/cpsw.txt | 8 +-
drivers/net/ethernet/ti/Kconfig | 2 +-
drivers/net/ethernet/ti/Makefile | 3 +-
drivers/net/ethernet/ti/cpsw.c | 84 ++++-----
drivers/net/ethernet/ti/cpsw.h | 2 -
drivers/net/ethernet/ti/cpts.c | 233 ++++++++++++++++++-------
drivers/net/ethernet/ti/cpts.h | 80 ++++++++-
kernel/time/clocksource.c | 1 +
8 files changed, 297 insertions(+), 116 deletions(-)
--
2.10.1
next reply other threads:[~2016-12-07 0:04 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-07 0:00 Grygorii Strashko [this message]
2016-12-07 0:00 ` [PATCH v5 01/13] net: ethernet: ti: cpts: switch to readl/writel_relaxed() Grygorii Strashko
2016-12-07 0:00 ` [PATCH v5 02/13] net: ethernet: ti: allow cpts to be built separately Grygorii Strashko
2016-12-07 0:00 ` [PATCH v5 03/13] net: ethernet: ti: cpsw: minimize direct access to struct cpts Grygorii Strashko
2016-12-07 0:00 ` [PATCH v5 04/13] net: ethernet: ti: cpts: fix unbalanced clk api usage in cpts_register/unregister Grygorii Strashko
2016-12-07 0:00 ` [PATCH v5 05/13] net: ethernet: ti: cpts: fix registration order Grygorii Strashko
2016-12-07 0:00 ` [PATCH v5 06/13] net: ethernet: ti: cpts: disable cpts when unregistered Grygorii Strashko
2016-12-07 0:00 ` [PATCH v5 07/13] net: ethernet: ti: cpts: clean up event list if event pool is empty Grygorii Strashko
2016-12-07 0:00 ` [PATCH v5 08/13] net: ethernet: ti: cpts: drop excessive writes to CTRL and INT_EN regs Grygorii Strashko
2016-12-07 0:00 ` [PATCH v5 09/13] net: ethernet: ti: cpts: rework initialization/deinitialization Grygorii Strashko
2016-12-07 0:00 ` [PATCH v5 10/13] net: ethernet: ti: cpts: move dt props parsing to cpts driver Grygorii Strashko
2016-12-07 0:00 ` [PATCH v5 11/13] clocksource: export the clocks_calc_mult_shift to use by timestamp code Grygorii Strashko
2016-12-07 0:00 ` [PATCH v5 12/13] net: ethernet: ti: cpts: calc mult and shift from refclk freq Grygorii Strashko
2016-12-07 0:00 ` [PATCH v5 13/13] net: ethernet: ti: cpts: fix overflow check period Grygorii Strashko
2016-12-07 8:58 ` [PATCH v5 00/13] net: ethernet: ti: cpts: update and fixes Richard Cochran
2016-12-07 16:14 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161207000045.28333-1-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=m-karicheri2@ti.com \
--cc=mugunthanvnm@ti.com \
--cc=netdev@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=richardcochran@gmail.com \
--cc=tglx@linutronix.de \
--cc=w-kwok2@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox