[PATCH 7/8] extcon: axp288: Remove unnecessary irq?_en register writes

[Hans de Goede <hdegoede@redhat.com>]

Setting the irq_enable bits is taken care of by the irq chip when we
request the irqs and the driver should not be meddling with the
irq?_en registers itself.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/extcon/extcon-axp288.c | 19 +++----------------
 1 file changed, 3 insertions(+), 16 deletions(-)

diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
index 7aec413..a27ee68 100644
--- a/drivers/extcon/extcon-axp288.c
+++ b/drivers/extcon/extcon-axp288.c
@@ -70,12 +70,6 @@
 #define DET_STAT_CDP			2
 #define DET_STAT_DCP			3
 
-/* IRQ enable-1 register */
-#define PWRSRC_IRQ_CFG_MASK		(BIT(4)|BIT(3)|BIT(2))
-
-/* IRQ enable-6 register */
-#define BC12_IRQ_CFG_MASK		BIT(1)
-
 enum axp288_extcon_reg {
 	AXP288_PS_STAT_REG		= 0x00,
 	AXP288_PS_BOOT_REASON_REG	= 0x02,
@@ -83,8 +77,6 @@ enum axp288_extcon_reg {
 	AXP288_BC_VBUS_CNTL_REG		= 0x2d,
 	AXP288_BC_USB_STAT_REG		= 0x2e,
 	AXP288_BC_DET_STAT_REG		= 0x2f,
-	AXP288_PWRSRC_IRQ_CFG_REG	= 0x40,
-	AXP288_BC12_IRQ_CFG_REG		= 0x45,
 };
 
 enum axp288_mux_select {
@@ -242,15 +234,10 @@ static irqreturn_t axp288_extcon_isr(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static void axp288_extcon_enable_irq(struct axp288_extcon_info *info)
+static void axp288_extcon_enable(struct axp288_extcon_info *info)
 {
-	/* Unmask VBUS interrupt */
-	regmap_write(info->regmap, AXP288_PWRSRC_IRQ_CFG_REG,
-						PWRSRC_IRQ_CFG_MASK);
 	regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
 						BC_GLOBAL_RUN, 0);
-	/* Unmask the BC1.2 complete interrupts */
-	regmap_write(info->regmap, AXP288_BC12_IRQ_CFG_REG, BC12_IRQ_CFG_MASK);
 	/* Enable the charger detection logic */
 	regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
 					BC_GLOBAL_RUN, BC_GLOBAL_RUN);
@@ -327,8 +314,8 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* Enable interrupts */
-	axp288_extcon_enable_irq(info);
+	/* Start charger cable type detection */
+	axp288_extcon_enable(info);
 
 	return 0;
 }
-- 
2.9.3