From: Radim Krcmar <rkrcmar@redhat.com>
To: Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Paolo Bonzini <pbonzini@redhat.com>,
Richard Cochran <richardcochran@gmail.com>,
Miroslav Lichvar <mlichvar@redhat.com>
Subject: Re: [patch 1/3] KVM: x86: provide realtime host clock via vsyscall notifiers
Date: Fri, 13 Jan 2017 16:18:04 +0100 [thread overview]
Message-ID: <20170113151804.GA25835@potion> (raw)
In-Reply-To: <20170113120317.948215303@redhat.com>
2017-01-13 10:01-0200, Marcelo Tosatti:
> Expose the realtime host clock and save the TSC value
> used for the clock calculation.
>
> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
>
> ---
> arch/x86/kvm/x86.c | 38 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
>
> Index: kvm-ptpdriver/arch/x86/kvm/x86.c
> ===================================================================
> --- kvm-ptpdriver.orig/arch/x86/kvm/x86.c 2017-01-13 08:59:03.015895353 -0200
> +++ kvm-ptpdriver/arch/x86/kvm/x86.c 2017-01-13 09:04:46.581415259 -0200
> @@ -1139,6 +1139,8 @@
>
> u64 boot_ns;
> u64 nsec_base;
> + u64 wall_time_sec;
> + u64 wall_time_snsec;
The leading "s" in "snsec" looks like a copy-paste residue.
> };
>
> static struct pvclock_gtod_data pvclock_gtod_data;
> @@ -1162,6 +1164,9 @@
> vdata->boot_ns = boot_ns;
> vdata->nsec_base = tk->tkr_mono.xtime_nsec;
>
> + vdata->wall_time_sec = tk->xtime_sec;
> + vdata->wall_time_snsec = tk->tkr_mono.xtime_nsec;
Using tk->tkr_mono offsets for real time seems wrong -- what happens if
the real time is half a second shifted from monotonic time?
If it's ok, then vdata->nsec_base == vdata->wall_time_snsec, so we don't
need it.
> +
> write_seqcount_end(&vdata->seq);
> }
> #endif
> @@ -1623,6 +1628,28 @@
> return mode;
> }
>
> +static int do_realtime(struct timespec *ts, cycle_t *cycle_now)
This is too similar to do_monotonic_boot(), but I don't see a solution
that is both nice and efficient. :(
(It usually means macros or copying pvclock_gtod_data.)
> +{
> + struct pvclock_gtod_data *gtod = &pvclock_gtod_data;
> + unsigned long seq;
> + int mode;
> + u64 ns;
> +
> + do {
> + seq = read_seqcount_begin(>od->seq);
> + mode = gtod->clock.vclock_mode;
> + ts->tv_sec = gtod->wall_time_sec;
> + ns = gtod->wall_time_snsec;
> + ns += vgettsc(cycle_now);
> + ns >>= gtod->clock.shift;
> + } while (unlikely(read_seqcount_retry(>od->seq, seq)));
> +
> + ts->tv_sec += __iter_div_u64_rem(ns, NSEC_PER_SEC, &ns);
> + ts->tv_nsec = ns;
> +
> + return mode;
> +}
> +
> /* returns true if host is using tsc clocksource */
> static bool kvm_get_time_and_clockread(s64 *kernel_ns, cycle_t *cycle_now)
> {
> @@ -1632,6 +1659,17 @@
>
> return do_monotonic_boot(kernel_ns, cycle_now) == VCLOCK_TSC;
> }
> +
> +/* returns true if host is using tsc clocksource */
> +static bool kvm_get_walltime_and_clockread(struct timespec *ts,
> + cycle_t *cycle_now)
> +{
> + /* checked again under seqlock below */
> + if (pvclock_gtod_data.clock.vclock_mode != VCLOCK_TSC)
> + return false;
> +
> + return do_realtime(ts, cycle_now) == VCLOCK_TSC;
> +}
> #endif
>
> /*
>
>
next prev parent reply other threads:[~2017-01-13 15:18 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-13 12:01 [patch 0/3] KVM virtual PTP driver Marcelo Tosatti
2017-01-13 12:01 ` [patch 1/3] KVM: x86: provide realtime host clock via vsyscall notifiers Marcelo Tosatti
2017-01-13 15:18 ` Radim Krcmar [this message]
2017-01-13 15:34 ` Marcelo Tosatti
2017-01-13 16:28 ` Radim Krcmar
2017-01-13 17:51 ` Marcelo Tosatti
2017-01-16 15:40 ` Radim Krcmar
2017-01-13 15:41 ` Konrad Rzeszutek Wilk
2017-01-13 15:46 ` Marcelo Tosatti
2017-01-13 12:01 ` [patch 2/3] KVM: x86: add KVM_HC_CLOCK_OFFSET hypercall Marcelo Tosatti
2017-01-13 15:31 ` Radim Krcmar
2017-01-13 15:43 ` Marcelo Tosatti
2017-01-13 17:07 ` Radim Krcmar
2017-01-13 17:57 ` Marcelo Tosatti
2017-01-13 12:01 ` [patch 3/3] PTP: add kvm PTP driver Marcelo Tosatti
2017-01-13 15:56 ` Radim Krcmar
2017-01-13 17:40 ` Marcelo Tosatti
2017-01-16 16:26 ` Radim Krcmar
2017-01-16 16:54 ` Radim Krcmar
2017-01-16 17:08 ` Marcelo Tosatti
2017-01-16 17:27 ` Radim Krcmar
2017-01-16 17:39 ` Marcelo Tosatti
2017-01-16 18:01 ` Radim Krcmar
2017-01-16 19:36 ` Marcelo Tosatti
2017-01-16 19:47 ` Marcelo Tosatti
2017-01-16 20:01 ` Marcelo Tosatti
2017-01-17 8:03 ` Miroslav Lichvar
2017-01-17 11:30 ` Marcelo Tosatti
2017-01-17 15:36 ` Radim Krcmar
2017-01-18 12:17 ` Marcelo Tosatti
2017-01-18 12:24 ` Marcelo Tosatti
2017-01-18 12:46 ` Paolo Bonzini
2017-01-18 13:36 ` Miroslav Lichvar
2017-01-18 14:02 ` Paolo Bonzini
2017-01-18 14:50 ` Marcelo Tosatti
2017-01-18 15:35 ` Radim Krcmar
2017-01-18 15:45 ` Paolo Bonzini
2017-01-18 15:57 ` Marcelo Tosatti
2017-01-18 14:24 ` Marcelo Tosatti
2017-01-18 15:54 ` Miroslav Lichvar
2017-01-18 16:07 ` Paolo Bonzini
2017-01-18 16:14 ` Radim Krcmar
2017-01-18 14:37 ` Marcelo Tosatti
2017-01-18 14:53 ` Marcelo Tosatti
2017-01-18 15:20 ` Radim Krcmar
2017-01-18 15:28 ` Marcelo Tosatti
2017-01-20 14:18 ` Radim Krcmar
2017-01-18 15:59 ` Radim Krcmar
2017-01-16 17:04 ` Marcelo Tosatti
2017-01-16 17:46 ` Radim Krcmar
2017-01-16 19:33 ` Marcelo Tosatti
2017-01-14 15:26 ` Richard Cochran
2017-01-16 15:48 ` Radim Krcmar
-- strict thread matches above, loose matches on Subject: below --
2017-01-13 18:45 [patch 0/3] KVM virtual PTP driver (v2) Marcelo Tosatti
2017-01-13 18:45 ` [patch 1/3] KVM: x86: provide realtime host clock via vsyscall notifiers Marcelo Tosatti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170113151804.GA25835@potion \
--to=rkrcmar@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlichvar@redhat.com \
--cc=mtosatti@redhat.com \
--cc=pbonzini@redhat.com \
--cc=richardcochran@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).