[PATCH] mfd: Add support for several boards to Kontron PLD driver

[Michael Brunner <mibru@gmx.de>]

This patch adds the DMI system ID of the Kontron COMe-bBD#, COMe-bKL6,
COMe-cKL6, COMe-bSL6 and COMe-cAL6 boards to the Kontron PLD driver. The
list of supported products in the module description is also updated.

Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Acked-by: Christian Rauch <christian.rauch@kontron.com>
---
 drivers/mfd/Kconfig       |  5 +++++
 drivers/mfd/kempld-core.c | 40 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 45 insertions(+)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 4ce3b6f..5394125 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -506,17 +506,22 @@ config MFD_KEMPLD
 	  device may provide functions like watchdog, GPIO, UART and I2C bus.
 
 	  The following modules are supported:
+		* COMe-bBD#
 		* COMe-bBL6
 		* COMe-bHL6
+		* COMe-bSL6
 		* COMe-bIP#
+		* COMe-bKL6
 		* COMe-bPC2 (ETXexpress-PC)
 		* COMe-bSC# (ETXexpress-SC T#)
+		* COMe-cAL6
 		* COMe-cBL6
 		* COMe-cBT6
 		* COMe-cBW6
 		* COMe-cCT6
 		* COMe-cDC2 (microETXexpress-DC)
 		* COMe-cHL6
+		* COMe-cKL6
 		* COMe-cPC2 (microETXexpress-PC)
 		* COMe-cSL6
 		* COMe-mAL10
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index da5722d..895f655 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -496,6 +496,14 @@ static struct platform_driver kempld_driver = {
 
 static struct dmi_system_id kempld_dmi_table[] __initdata = {
 	{
+		.ident = "BBD6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-bBD"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "BBL6",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -512,6 +520,30 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
 	}, {
+		.ident = "BKL6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-bKL6"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
+		.ident = "BSL6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-bSL6"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
+		.ident = "CAL6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-cAL"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "CBL6",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -600,6 +632,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
 	}, {
+		.ident = "CKL6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-cKL6"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "CNTG",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
-- 
2.7.4