* [PATCH] mfd: Add support for several boards to Kontron PLD driver
@ 2017-01-26 16:45 Michael Brunner
2017-01-26 19:27 ` Guenter Roeck
2017-02-07 16:28 ` Lee Jones
0 siblings, 2 replies; 3+ messages in thread
From: Michael Brunner @ 2017-01-26 16:45 UTC (permalink / raw)
To: Lee Jones, linux-kernel@vger.kernel.org
Cc: Christian Rauch, Michael Brunner, Darren Hart, Kevin Strasser,
Guenter Roeck
This patch adds the DMI system ID of the Kontron COMe-bBD#, COMe-bKL6,
COMe-cKL6, COMe-bSL6 and COMe-cAL6 boards to the Kontron PLD driver. The
list of supported products in the module description is also updated.
Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Acked-by: Christian Rauch <christian.rauch@kontron.com>
---
drivers/mfd/Kconfig | 5 +++++
drivers/mfd/kempld-core.c | 40 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 45 insertions(+)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 4ce3b6f..5394125 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -506,17 +506,22 @@ config MFD_KEMPLD
device may provide functions like watchdog, GPIO, UART and I2C bus.
The following modules are supported:
+ * COMe-bBD#
* COMe-bBL6
* COMe-bHL6
+ * COMe-bSL6
* COMe-bIP#
+ * COMe-bKL6
* COMe-bPC2 (ETXexpress-PC)
* COMe-bSC# (ETXexpress-SC T#)
+ * COMe-cAL6
* COMe-cBL6
* COMe-cBT6
* COMe-cBW6
* COMe-cCT6
* COMe-cDC2 (microETXexpress-DC)
* COMe-cHL6
+ * COMe-cKL6
* COMe-cPC2 (microETXexpress-PC)
* COMe-cSL6
* COMe-mAL10
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index da5722d..895f655 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -496,6 +496,14 @@ static struct platform_driver kempld_driver = {
static struct dmi_system_id kempld_dmi_table[] __initdata = {
{
+ .ident = "BBD6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-bBD"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
.ident = "BBL6",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -512,6 +520,30 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
}, {
+ .ident = "BKL6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-bKL6"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
+ .ident = "BSL6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-bSL6"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
+ .ident = "CAL6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-cAL"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
.ident = "CBL6",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -600,6 +632,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
}, {
+ .ident = "CKL6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-cKL6"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
.ident = "CNTG",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] mfd: Add support for several boards to Kontron PLD driver
2017-01-26 16:45 [PATCH] mfd: Add support for several boards to Kontron PLD driver Michael Brunner
@ 2017-01-26 19:27 ` Guenter Roeck
2017-02-07 16:28 ` Lee Jones
1 sibling, 0 replies; 3+ messages in thread
From: Guenter Roeck @ 2017-01-26 19:27 UTC (permalink / raw)
To: Michael Brunner
Cc: Lee Jones, linux-kernel@vger.kernel.org, Christian Rauch,
Michael Brunner, Darren Hart, Kevin Strasser
On Thu, Jan 26, 2017 at 05:45:46PM +0100, Michael Brunner wrote:
> This patch adds the DMI system ID of the Kontron COMe-bBD#, COMe-bKL6,
> COMe-cKL6, COMe-bSL6 and COMe-cAL6 boards to the Kontron PLD driver. The
> list of supported products in the module description is also updated.
>
> Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
> Acked-by: Christian Rauch <christian.rauch@kontron.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
> drivers/mfd/Kconfig | 5 +++++
> drivers/mfd/kempld-core.c | 40 ++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 45 insertions(+)
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 4ce3b6f..5394125 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -506,17 +506,22 @@ config MFD_KEMPLD
> device may provide functions like watchdog, GPIO, UART and I2C bus.
>
> The following modules are supported:
> + * COMe-bBD#
> * COMe-bBL6
> * COMe-bHL6
> + * COMe-bSL6
> * COMe-bIP#
> + * COMe-bKL6
> * COMe-bPC2 (ETXexpress-PC)
> * COMe-bSC# (ETXexpress-SC T#)
> + * COMe-cAL6
> * COMe-cBL6
> * COMe-cBT6
> * COMe-cBW6
> * COMe-cCT6
> * COMe-cDC2 (microETXexpress-DC)
> * COMe-cHL6
> + * COMe-cKL6
> * COMe-cPC2 (microETXexpress-PC)
> * COMe-cSL6
> * COMe-mAL10
> diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
> index da5722d..895f655 100644
> --- a/drivers/mfd/kempld-core.c
> +++ b/drivers/mfd/kempld-core.c
> @@ -496,6 +496,14 @@ static struct platform_driver kempld_driver = {
>
> static struct dmi_system_id kempld_dmi_table[] __initdata = {
> {
> + .ident = "BBD6",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-bBD"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> .ident = "BBL6",
> .matches = {
> DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> @@ -512,6 +520,30 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
> .driver_data = (void *)&kempld_platform_data_generic,
> .callback = kempld_create_platform_device,
> }, {
> + .ident = "BKL6",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-bKL6"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> + .ident = "BSL6",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-bSL6"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> + .ident = "CAL6",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-cAL"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> .ident = "CBL6",
> .matches = {
> DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> @@ -600,6 +632,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
> .driver_data = (void *)&kempld_platform_data_generic,
> .callback = kempld_create_platform_device,
> }, {
> + .ident = "CKL6",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-cKL6"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> .ident = "CNTG",
> .matches = {
> DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> --
> 2.7.4
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] mfd: Add support for several boards to Kontron PLD driver
2017-01-26 16:45 [PATCH] mfd: Add support for several boards to Kontron PLD driver Michael Brunner
2017-01-26 19:27 ` Guenter Roeck
@ 2017-02-07 16:28 ` Lee Jones
1 sibling, 0 replies; 3+ messages in thread
From: Lee Jones @ 2017-02-07 16:28 UTC (permalink / raw)
To: Michael Brunner
Cc: linux-kernel@vger.kernel.org, Christian Rauch, Michael Brunner,
Darren Hart, Kevin Strasser, Guenter Roeck
On Thu, 26 Jan 2017, Michael Brunner wrote:
> This patch adds the DMI system ID of the Kontron COMe-bBD#, COMe-bKL6,
> COMe-cKL6, COMe-bSL6 and COMe-cAL6 boards to the Kontron PLD driver. The
> list of supported products in the module description is also updated.
>
> Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
> Acked-by: Christian Rauch <christian.rauch@kontron.com>
> ---
> drivers/mfd/Kconfig | 5 +++++
> drivers/mfd/kempld-core.c | 40 ++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 45 insertions(+)
Applied, thanks.
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 4ce3b6f..5394125 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -506,17 +506,22 @@ config MFD_KEMPLD
> device may provide functions like watchdog, GPIO, UART and I2C bus.
>
> The following modules are supported:
> + * COMe-bBD#
> * COMe-bBL6
> * COMe-bHL6
> + * COMe-bSL6
> * COMe-bIP#
> + * COMe-bKL6
> * COMe-bPC2 (ETXexpress-PC)
> * COMe-bSC# (ETXexpress-SC T#)
> + * COMe-cAL6
> * COMe-cBL6
> * COMe-cBT6
> * COMe-cBW6
> * COMe-cCT6
> * COMe-cDC2 (microETXexpress-DC)
> * COMe-cHL6
> + * COMe-cKL6
> * COMe-cPC2 (microETXexpress-PC)
> * COMe-cSL6
> * COMe-mAL10
> diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
> index da5722d..895f655 100644
> --- a/drivers/mfd/kempld-core.c
> +++ b/drivers/mfd/kempld-core.c
> @@ -496,6 +496,14 @@ static struct platform_driver kempld_driver = {
>
> static struct dmi_system_id kempld_dmi_table[] __initdata = {
> {
> + .ident = "BBD6",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-bBD"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> .ident = "BBL6",
> .matches = {
> DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> @@ -512,6 +520,30 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
> .driver_data = (void *)&kempld_platform_data_generic,
> .callback = kempld_create_platform_device,
> }, {
> + .ident = "BKL6",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-bKL6"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> + .ident = "BSL6",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-bSL6"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> + .ident = "CAL6",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-cAL"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> .ident = "CBL6",
> .matches = {
> DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> @@ -600,6 +632,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
> .driver_data = (void *)&kempld_platform_data_generic,
> .callback = kempld_create_platform_device,
> }, {
> + .ident = "CKL6",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-cKL6"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> .ident = "CNTG",
> .matches = {
> DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-02-07 16:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-01-26 16:45 [PATCH] mfd: Add support for several boards to Kontron PLD driver Michael Brunner
2017-01-26 19:27 ` Guenter Roeck
2017-02-07 16:28 ` Lee Jones
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox