public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: John Keeping <john@metanate.com>
To: Mark Yao <mark.yao@rock-chips.com>
Cc: Chris Zhong <zyw@rock-chips.com>,
	dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	John Keeping <john@metanate.com>
Subject: [PATCH v3 01/24] drm/rockchip: dw-mipi-dsi: don't configure hardware in mode_set for MIPI
Date: Sun, 29 Jan 2017 13:24:21 +0000	[thread overview]
Message-ID: <20170129132444.25251-2-john@metanate.com> (raw)
In-Reply-To: <20170129132444.25251-1-john@metanate.com>

With atomic modesetting the hardware will be powered off when the
mode_set function is called.  We should configure the hardware in the
enable function, which is the atomic version of "commit" so let's use
the enable hook rather than commit while we're at it.

Signed-off-by: John Keeping <john@metanate.com>
---
v3:
- Squash together with the commit to s/commit/enable/
Unchanged in v2

 drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 49 +++++++++++++++-------------------
 1 file changed, 21 insertions(+), 28 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index d9aa382bb629..bbd992299f73 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -819,34 +819,8 @@ static void dw_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder,
 					struct drm_display_mode *adjusted_mode)
 {
 	struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
-	int ret;
 
 	dsi->mode = adjusted_mode;
-
-	ret = dw_mipi_dsi_get_lane_bps(dsi);
-	if (ret < 0)
-		return;
-
-	if (clk_prepare_enable(dsi->pclk)) {
-		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
-		return;
-	}
-
-	dw_mipi_dsi_init(dsi);
-	dw_mipi_dsi_dpi_config(dsi, mode);
-	dw_mipi_dsi_packet_handler_config(dsi);
-	dw_mipi_dsi_video_mode_config(dsi);
-	dw_mipi_dsi_video_packet_config(dsi, mode);
-	dw_mipi_dsi_command_mode_config(dsi);
-	dw_mipi_dsi_line_timer_config(dsi);
-	dw_mipi_dsi_vertical_timing_config(dsi);
-	dw_mipi_dsi_dphy_timing_config(dsi);
-	dw_mipi_dsi_dphy_interface_config(dsi);
-	dw_mipi_dsi_clear_err(dsi);
-	if (drm_panel_prepare(dsi->panel))
-		dev_err(dsi->dev, "failed to prepare panel\n");
-
-	clk_disable_unprepare(dsi->pclk);
 }
 
 static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
@@ -875,17 +849,36 @@ static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
 	clk_disable_unprepare(dsi->pclk);
 }
 
-static void dw_mipi_dsi_encoder_commit(struct drm_encoder *encoder)
+static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
 {
 	struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
 	int mux = drm_of_encoder_active_endpoint_id(dsi->dev->of_node, encoder);
 	u32 val;
+	int ret;
+
+	ret = dw_mipi_dsi_get_lane_bps(dsi);
+	if (ret < 0)
+		return;
 
 	if (clk_prepare_enable(dsi->pclk)) {
 		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
 		return;
 	}
 
+	dw_mipi_dsi_init(dsi);
+	dw_mipi_dsi_dpi_config(dsi, dsi->mode);
+	dw_mipi_dsi_packet_handler_config(dsi);
+	dw_mipi_dsi_video_mode_config(dsi);
+	dw_mipi_dsi_video_packet_config(dsi, dsi->mode);
+	dw_mipi_dsi_command_mode_config(dsi);
+	dw_mipi_dsi_line_timer_config(dsi);
+	dw_mipi_dsi_vertical_timing_config(dsi);
+	dw_mipi_dsi_dphy_timing_config(dsi);
+	dw_mipi_dsi_dphy_interface_config(dsi);
+	dw_mipi_dsi_clear_err(dsi);
+	if (drm_panel_prepare(dsi->panel))
+		dev_err(dsi->dev, "failed to prepare panel\n");
+
 	dw_mipi_dsi_phy_init(dsi);
 	dw_mipi_dsi_wait_for_two_frames(dsi);
 
@@ -933,7 +926,7 @@ dw_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder,
 
 static struct drm_encoder_helper_funcs
 dw_mipi_dsi_encoder_helper_funcs = {
-	.commit = dw_mipi_dsi_encoder_commit,
+	.enable = dw_mipi_dsi_encoder_enable,
 	.mode_set = dw_mipi_dsi_encoder_mode_set,
 	.disable = dw_mipi_dsi_encoder_disable,
 	.atomic_check = dw_mipi_dsi_encoder_atomic_check,
-- 
2.11.0.197.gb556de5.dirty

  reply	other threads:[~2017-01-29 14:08 UTC|newest]

Thread overview: 70+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-29 13:24 [PATCH v3 00/24] drm/rockchip: MIPI fixes & improvements John Keeping
2017-01-29 13:24 ` John Keeping [this message]
2017-01-30 15:35   ` [PATCH v3 01/24] drm/rockchip: dw-mipi-dsi: don't configure hardware in mode_set for MIPI Sean Paul
2017-01-29 13:24 ` [PATCH v3 02/24] drm/rockchip: dw-mipi-dsi: pass mode in where needed John Keeping
2017-01-30 15:40   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 03/24] drm/rockchip: dw-mipi-dsi: remove mode_set hook John Keeping
2017-01-30 15:40   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 04/24] drm/rockchip: dw-mipi-dsi: fix command header writes John Keeping
2017-01-30 15:43   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 05/24] drm/rockchip: dw-mipi-dsi: fix generic packet status check John Keeping
2017-01-30 17:56   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 06/24] drm/rockchip: dw-mipi-dsi: avoid out-of-bounds read on tx_buf John Keeping
2017-01-30 18:01   ` Sean Paul
2017-01-30 18:16     ` John Keeping
2017-01-30 20:09       ` Sean Paul
2017-01-31 11:45         ` John Keeping
2017-01-31 14:48           ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 07/24] drm/rockchip: dw-mipi-dsi: include bad value in error message John Keeping
2017-01-30 18:02   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 08/24] drm/rockchip: dw-mipi-dsi: respect message flags John Keeping
2017-01-30 18:19   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 09/24] drm/rockchip: dw-mipi-dsi: only request HS clock when required John Keeping
2017-01-30 18:20   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 10/24] drm/rockchip: dw-mipi-dsi: don't assume buffer is aligned John Keeping
2017-01-30 20:08   ` Sean Paul
2017-01-31 11:56     ` John Keeping
2017-01-31 14:53       ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 11/24] drm/rockchip: dw-mipi-dsi: prepare panel after phy init John Keeping
2017-01-30 20:16   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 12/24] drm/rockchip: dw-mipi-dsi: allow commands in panel_disable John Keeping
2017-01-30 20:19   ` Sean Paul
2017-01-31 12:03     ` John Keeping
2017-01-29 13:24 ` [PATCH v3 13/24] drm/rockchip: dw-mipi-dsi: fix escape clock rate John Keeping
2017-01-30 20:25   ` Sean Paul
2017-02-01 17:23     ` John Keeping
2017-01-29 13:24 ` [PATCH v3 14/24] drm/rockchip: dw-mipi-dsi: ensure PHY is reset John Keeping
2017-01-30 20:25   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 15/24] drm/rockchip: dw-mipi-dsi: configure PHY before enabling John Keeping
2017-01-30 20:28   ` Sean Paul
2017-01-31 12:14     ` John Keeping
2017-01-29 13:24 ` [PATCH v3 16/24] drm/rockchip: dw-mipi-dsi: properly configure PHY timing John Keeping
2017-01-30 21:57   ` Sean Paul
2017-01-31 12:39     ` John Keeping
2017-01-29 13:24 ` [PATCH v3 17/24] drm/rockchip: dw-mipi-dsi: improve PLL configuration John Keeping
2017-01-31 19:03   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 18/24] drm/rockchip: dw-mipi-dsi: use specific poll helper John Keeping
2017-01-31 18:45   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 19/24] drm/rockchip: dw-mipi-dsi: use positive check for N{H,V}SYNC John Keeping
2017-01-31 19:12   ` [PATCH v3 19/24] drm/rockchip: dw-mipi-dsi: use positive check for N{H, V}SYNC Sean Paul
2017-01-29 13:24 ` [PATCH v3 20/24] drm/rockchip: vop: test for P{H,V}SYNC John Keeping
2017-01-31 19:14   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 21/24] drm/rockchip: dw-mipi-dsi: defer probe if panel is not loaded John Keeping
2017-01-31 19:21   ` Sean Paul
2017-02-10 17:27     ` John Keeping
2017-01-29 13:24 ` [PATCH v3 22/24] drm/rockchip: dw-mipi-dsi: support non-burst modes John Keeping
2017-01-31 19:22   ` Sean Paul
2017-02-16  3:01     ` Chris Zhong
2017-02-16 14:22       ` John Keeping
2017-01-29 13:24 ` [PATCH v3 23/24] drm/rockchip: dw-mipi-dsi: add reset control John Keeping
2017-01-31 19:28   ` Sean Paul
2017-02-15  3:38   ` Chris Zhong
2017-02-15 12:39     ` John Keeping
2017-02-16  2:12       ` Chris Zhong
2017-02-16 14:11         ` John Keeping
2017-01-29 13:24 ` [PATCH v3 24/24] drm/rockchip: dw-mipi-dsi: support read commands John Keeping
2017-01-30 15:26   ` Sean Paul
2017-01-30 18:14     ` John Keeping
2017-01-30 20:16       ` Sean Paul
2017-01-31 12:41         ` John Keeping
2017-01-31 14:47           ` Sean Paul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170129132444.25251-2-john@metanate.com \
    --to=john@metanate.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.yao@rock-chips.com \
    --cc=zyw@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox