From: Johan Hovold <johan@kernel.org>
To: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 1/2] HID: cp2112: fix sleep-while-atomic
Date: Mon, 30 Jan 2017 11:26:38 +0100 [thread overview]
Message-ID: <20170130102639.3832-1-johan@kernel.org> (raw)
In-Reply-To: <20170130102235.3691-1-johan@kernel.org>
A recent commit fixing DMA-buffers on stack added a shared transfer
buffer protected by a spinlock. This is broken as the USB HID request
callbacks can sleep. Fix this up by replacing the spinlock with a mutex.
Fixes: 1ffb3c40ffb5 ("HID: cp2112: make transfer buffers DMA capable")
Cc: stable <stable@vger.kernel.org> # 4.9
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/hid/hid-cp2112.c | 26 +++++++++++---------------
1 file changed, 11 insertions(+), 15 deletions(-)
diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c
index f31a778b0851..3e0b6bad29f2 100644
--- a/drivers/hid/hid-cp2112.c
+++ b/drivers/hid/hid-cp2112.c
@@ -168,7 +168,7 @@ struct cp2112_device {
atomic_t xfer_avail;
struct gpio_chip gc;
u8 *in_out_buffer;
- spinlock_t lock;
+ struct mutex lock;
struct gpio_desc *desc[8];
bool gpio_poll;
@@ -186,10 +186,9 @@ static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
struct cp2112_device *dev = gpiochip_get_data(chip);
struct hid_device *hdev = dev->hdev;
u8 *buf = dev->in_out_buffer;
- unsigned long flags;
int ret;
- spin_lock_irqsave(&dev->lock, flags);
+ mutex_lock(&dev->lock);
ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
@@ -213,7 +212,7 @@ static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
ret = 0;
exit:
- spin_unlock_irqrestore(&dev->lock, flags);
+ mutex_unlock(&dev->lock);
return ret <= 0 ? ret : -EIO;
}
@@ -222,10 +221,9 @@ static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
struct cp2112_device *dev = gpiochip_get_data(chip);
struct hid_device *hdev = dev->hdev;
u8 *buf = dev->in_out_buffer;
- unsigned long flags;
int ret;
- spin_lock_irqsave(&dev->lock, flags);
+ mutex_lock(&dev->lock);
buf[0] = CP2112_GPIO_SET;
buf[1] = value ? 0xff : 0;
@@ -237,7 +235,7 @@ static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
if (ret < 0)
hid_err(hdev, "error setting GPIO values: %d\n", ret);
- spin_unlock_irqrestore(&dev->lock, flags);
+ mutex_unlock(&dev->lock);
}
static int cp2112_gpio_get_all(struct gpio_chip *chip)
@@ -245,10 +243,9 @@ static int cp2112_gpio_get_all(struct gpio_chip *chip)
struct cp2112_device *dev = gpiochip_get_data(chip);
struct hid_device *hdev = dev->hdev;
u8 *buf = dev->in_out_buffer;
- unsigned long flags;
int ret;
- spin_lock_irqsave(&dev->lock, flags);
+ mutex_lock(&dev->lock);
ret = hid_hw_raw_request(hdev, CP2112_GPIO_GET, buf,
CP2112_GPIO_GET_LENGTH, HID_FEATURE_REPORT,
@@ -262,7 +259,7 @@ static int cp2112_gpio_get_all(struct gpio_chip *chip)
ret = buf[1];
exit:
- spin_unlock_irqrestore(&dev->lock, flags);
+ mutex_unlock(&dev->lock);
return ret;
}
@@ -284,10 +281,9 @@ static int cp2112_gpio_direction_output(struct gpio_chip *chip,
struct cp2112_device *dev = gpiochip_get_data(chip);
struct hid_device *hdev = dev->hdev;
u8 *buf = dev->in_out_buffer;
- unsigned long flags;
int ret;
- spin_lock_irqsave(&dev->lock, flags);
+ mutex_lock(&dev->lock);
ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
@@ -308,7 +304,7 @@ static int cp2112_gpio_direction_output(struct gpio_chip *chip,
goto fail;
}
- spin_unlock_irqrestore(&dev->lock, flags);
+ mutex_unlock(&dev->lock);
/*
* Set gpio value when output direction is already set,
@@ -319,7 +315,7 @@ static int cp2112_gpio_direction_output(struct gpio_chip *chip,
return 0;
fail:
- spin_unlock_irqrestore(&dev->lock, flags);
+ mutex_unlock(&dev->lock);
return ret < 0 ? ret : -EIO;
}
@@ -1235,7 +1231,7 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (!dev->in_out_buffer)
return -ENOMEM;
- spin_lock_init(&dev->lock);
+ mutex_init(&dev->lock);
ret = hid_parse(hdev);
if (ret) {
--
2.10.2
next prev parent reply other threads:[~2017-01-30 10:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-30 10:22 [PATCH 0/2] HID: cp2112: fix sleep-while-atomic regression Johan Hovold
2017-01-30 10:26 ` Johan Hovold [this message]
2017-01-30 10:26 ` [PATCH 2/2] HID: cp2112: fix gpio-callback error handling Johan Hovold
2017-01-30 12:45 ` [PATCH 0/2] HID: cp2112: fix sleep-while-atomic regression Benjamin Tissoires
2017-01-31 12:06 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170130102639.3832-1-johan@kernel.org \
--to=johan@kernel.org \
--cc=benjamin.tissoires@redhat.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox